Description

Schäffer 3026, 3033(S) 2005 Parts Catalog

I’ve seen guys order a steering cylinder seal kit off a generic cross-reference and end up with a hose fitting that doesn’t match the port angle. That’s money down the drain and a machine parked while you wait for the right part. The Schäffer 3026, 3033(S) 2005 Parts Catalog puts the factory drawing in front of you — every seal, every bearing, every hydraulic fitting with its original Schäffer part number. If you’re rebuilding a loader in San Antonio heat, you want the correct o-ring the first time.

This is a 118-page factory parts list, not a reprint from some third-party reseller. Page 1 shows the loader model designation and the document date of 05/2005. Page 5 gives you the full Inhaltsverzeichnis (table of contents) covering chapters E 1 through E 35, plus special equipment and cab sections. No guesswork on which bolt goes to which bracket.

Hydraulic Cylinder Breakdowns – Lenkzylinder, Hubzylinder, Werkzeugzylinder

Chapters E 1, E 2, and E 4 cover the steering cylinder, lift cylinder, and tool cylinder. Each exploded view labels every component with a reference number that ties directly to the part list on the facing page. If you need the rod seal for the hubzylinder, you flip to that chapter and see the exact diameter and material callout. No aftermarket manual substitutes a generic “seal kit” that may or may not fit the 3033(S) taper.

7 Systems Covered – From Hydraulics to Axles

Look at the chapter list: E 6 Hydraulikfilter, E 7 Lenkhydraulik, E 8 Arbeitshydraulik, E 9 Steuergerät, E 10 Fahrhydraulik, E 27 Vorderachse, E 28 Hinterachse. Seven major systems are broken out with separate part number indexes. The Sonderausstattung (special equipment) sections include the Tandempumpe / druckfr. Rücklauf (S 8.1) and the ROPS-Bügel (S 16.1). If your machine has the optional hydraulic werkzeugverriegelung, chapter S 18.2 shows every pin, spring, and solenoid.

Does This Manual Cover the Cab and Canopy?

Yes. The catalog includes a complete section for the Dieteg Typ 3036 cab (Kapitel K 1.1 through K 1.13) with door, heating, sound insulation, seat flap, and switch console. There’s also a Verdeck (canopy) section with retrofit kits. If you’re ordering a cab seal or a heater fan, the part number is right there.

Source Validity – OEM vs Aftermarket Documentation

You can spot a genuine Schäffer catalog by the part number format and the three-language labels (German, English, French). The original file name ends with 36814014902.pdf. I’ve had aftermarket suppliers send me a “universal” parts list for Schäffer loaders that skipped half the chassis. This one is the real factory document from 2005. It’s the same reference that a Schäffer dealer uses when you call in with a serial number.

For other wheel loader models, check the Schäffer Spare Parts List 3033(S) / 3026″>Schäffer Spare Parts List 3033(S) / 3026 or the Schäffer D905-E2B-EU-XL1 Parts Catalog – OEM Factory Spare Parts List”>Schäffer D905-E2B-EU-XL1 Parts Catalog – OEM Factory Spare Parts List. A Schäffer 4042 / 4048(S) Spare Parts List”>Schäffer 4042 / 4048(S) Spare Parts List is also available if you run the larger frame.

FAQ

Can I use this to identify parts for a 3026 built after 2005?

This catalog was published in 2005. It covers the 3026 and 3033(S) models as built up to that date. If you have a later serial number, cross-reference the major assemblies. Hydraulic cylinders and driveline components changed slowly on these machines.

Are torque values included for hydraulic fittings?

No. This is a parts catalog, not a service manual. For torque specs, you need the factory service manual. The parts list shows the correct o-ring and backup washer.

The construction industry relies on factory drawings when a loader is down. Pull the Automotive Industry Overview right now. For context on the market, you can also read the Automotive Industry Overview”>Automotive Industry Overview. But for the part, there’s no substitute for the factory source.

Access the Factory Manual.