Description

Schaeff SKL834 2007 Parts Catalog

Matching parts on a Schaeff SKL834 2007 Parts Catalog without the factory listing is a good way to burn billable hours and end up with a pile of wrong bolts. I’ve seen it. You order a ‘MUTTER M 8’ from a parts house, get something with the wrong thread pitch, and now the mud guard sits loose. That’s where the Schaeff SKL834 2007 Parts Catalog comes in. 251 pages of exploded views and part numbers—exactly what Schaeff released for the SKL834 in 2007. None of that third-party re-draw. This is the original OEM print.

Schaeff SKL834 2007 Parts Catalog: Front Chassis Coverage

Open this Parts Catalog to page 1 and you’re staring at group 1.001 – VORDERWAGEN (front chassis). Every nut, bolt, washer, mud guard, and light holder is listed with its Schaeff part number, quantity, and unit. The diagram sheet (page 3) shows exactly where item 11 (KOTFLÜGEL – mud guard) mounts and which fasteners hold it. You get the drawing number, sheet number, and internal reference. No guesswork.

KNICKGELENK – Articulated Joint Parts on Page 4

Page 4 jumps into group 1.002 – KNICKGELENK (articulated joint). This is the pivot that keeps your loader steering straight. The listing includes the BOLZEN (pin) and GELENKLAGER (joint bearing). You need the right pin diameter and the correct bearing clearance. This catalog gives you the factory part numbers, not a generic replacement. When you’re rebuilding that joint, having this page open saves a trip to the dealer.

How to Read the Part Number Listings

Each row in this Parts Catalog gives you a position number, a Schaeff Ident Number (part number), a drawing number, and a sheet number. The description is in German, English, and French – trilingual, which matters when the machine was built in Europe. The ‘Memo’ column flags special notes. For example, item 1 on page 1 (BOLZEN) has an internal number. Use that internal number if you’re calling Schaeff support. Don’t rely on descriptions like ‘big pin’ – use the number.

3 Critical Details in This Factory Catalog

First: the printout date is 05.02.2007 – this is the 2007 revision. Second: the parts are grouped by assembly (Baugruppe). Group 1.001 covers the front chassis; group 1.002 the articulation joint. Third: every fastener–M8, M10, M6–is listed with its washer and nut. You get the exact bolt length (e.g., M 10×40) so you don’t bottom out or leave too much thread showing. Without these details, you’re guessing.

Order Parts by OEM Number, Not Description

Walk into a parts counter and say ‘I need a Kotflügelhalter’ and they’ll stare. Give them part number 6451002031 (the bracket for the mud guard) and they’ll have it in two days. This catalog is your cross‑reference. The group number (1.001) and sheet number (01) also help you locate the exact diagram. I’ve used these to find discontinued parts by matching the internal number against Schaeff’s archive. It works.

Why 251 Pages Matter for Your SKL834

251 pages might sound like a lot for a parts list, but each page covers a specific sub‑assembly. The catalog includes the full parts breakdown for the entire loader: engine, hydraulics, drivetrain, and electrics. The OCR excerpt shows the front chassis, but the full PDF contains every group from 1.001 to maybe 20.xxx. You get the entire machine. If you’re restoring an SKL834 or keeping one running, this is the only parts book you need.

Does this catalog include bolt tightening torque values?

No, this is a parts catalog, not a service manual. It lists part numbers and quantities only. You’ll need the separate service manual for torque specs.

Can I use this catalog to order parts for my SKL834 if the machine was originally sold in Europe?

Yes. The catalog was originally printed in Germany on 05.02.2007 and includes German, English, and French translations. The part numbers are universal across Schaeff’s global network. However, check the ‘Memo’ column for any region‑specific notes. The front chassis group 1.001 shown on page 1 uses metric fasteners (M8, M10) that are standard worldwide. If your machine has been modified or retrofitted, verify the drawing number matches your unit’s serial number range. The SKL834 production spanned several years, and Schaeff updated part numbers. This 2007 edition covers all SKL834 variants up to that date. For machines built after 2007, you may need a supplementary bulletin. The catalog’s 251 pages cover the entire loader, including the KNICKGELENK group 1.002 shown on page 4. If you encounter a part with a different internal number than what you see, call Schaeff with the group and drawing number. They can cross‑reference it to a newer supersession. I have used this method to find pins for a 1998 SKL834 that were listed as obsolete – the catalog gave me the original number, and Schaeff found the replacement.

Related manuals for other Schaeff models: Terex Schaeff SKL 871 1997 Parts Catalog – OEM Factory Manual, Terex Schaeff SKL 861 1997 Parts Catalog – Factory OEM, Terex Schaeff SKL 861 1994 Parts Catalog – OEM Specs. For broader context on heavy equipment, see Automotive Industry Overview. The automotive parts ecosystem also touches construction machinery; Automotive Industry Overview may help with cross‑reference strategies. Access the Factory Manual directly from AutoRepairManuals and keep your SKL834 running with the right parts.