Description

SCAT TRAK 234s 2000 Parts Catalog – This Is What You Need on the Bench

I’ve been turning wrenches since before you could spell “torque,” and I’ve seen more parts orders go sideways because somebody used a third-party catalog. That’s why when a SCAT TRAK 234s rolls into my bay, I reach for the factory book. This is the genuine SCAT TRAK 234s 2000 Parts Catalog – 132 pages of exploded diagrams and OEM reference numbers that actually match what’s bolted to the machine. No aftermarket guesswork, no reprints from a fuzzy scan. This is the same binder that was on the dealer’s shelf in 2000.

SCAT TRAK 234s 2000 Parts Catalog: What You’re Getting

Flip to page 3 and you’ll see the full Indice dei Gruppi – the groups index. It breaks the machine into nine sections: Hydraulic and Electric System, Undercarriage Frame, Turning Frame, Engine-Radiator, Control Valve-Controls, Operator’s Seat-Hood, Arms, Decals-Accessories, and Tools. That covers every nut, hose, seal, and bracket on the 234s. Need the part number for the main control valve spool? It’s in group 05. Looking for the engine radiator mounting bolts? Group 04. The catalog uses standard abbreviations (SX for left, OX for right, ANT front, POST rear) so you don’t waste time guessing which side is which. Arrows on the tables show work direction – a small detail that saves you from bolting something on backwards.

7 Major Systems Covered – One Catalog

You get nine groups, but seven of them cover major mechanical systems. Let me call out the ones that bite you if you get the part wrong:

• Group 01 – Hydraulic and Electric System: Pumps, hoses, fittings, and wiring. If you mix up the hose routing because a reprint catalog reversed the diagram, you’re looking at a hydraulic leak and a $400 cleanup.
• Group 04 – Engine-Radiator: Engine block, cooling system, mounts. The valve train components live here – rockers, pushrods, and the cylinder head gasket. You need the correct OEM gasket thickness or you’ll be pulling the head twice.
• Group 05 – Control Valve-Controls: Main control valve, pilot valves, linkage. This is where a wrong part number means the machine won’t steer or lift.

And that’s just the start. The undercarriage frame (group 02) and turning frame (group 03) have their own part numbers for bearings and seals that aftermarket catalogs often omit. Don’t trust a generic list.

Does This Manual Include Valve Specifications?

Yes – but as a parts catalog, not a service manual. The valve sections (control valve, engine valve train) show the exact OEM part numbers for each component. You won’t find torque specs or clearance values here; that’s what the service manual is for. What you will find is the correct replacement for every seal, spring, and plunger inside the valve stack. If you’re rebuilding a control valve, you need this catalog to order the right spool kit. Otherwise you’re buying three different kits and returning two. I’ve been that guy. It’s a waste of billable hours.

Understand the Engine-Radiator Group Before You Order

Group 04 covers the engine and radiator assembly. The catalog lists the radiator core, fan blades, fan shroud, and all mounting brackets. It also breaks down the engine itself: cylinder head, valves, pistons, and the oil pan. Each figure number corresponds to an exploded view – you match the part in the diagram to the reference number, then look up the part code. The catalog even includes usage codes (see page 1) that tell you if a part was superseded or only fits certain serial numbers. That level of detail is why I won’t use anything but the factory book.

Source Validity: Why OEM Beats Aftermarket Copies

This is an original SCAT TRAK publication, printed in the U.S.A. in 8/00 (August 2000). The part number 8990399 is stamped on the cover. I’ve seen aftermarket “reprints” that re-number figures, drop the usage codes, and use low-resolution scans where the reference numbers are illegible. If you can’t read the number next to the valve spool, you order the wrong part. Then the machine sits idle for a week. That’s not saving money. That’s wasting it. The SCAT TRAK 234s 2000 Parts Catalog is the only version I trust for my own shop. If you’re working on other SCAT TRAK models, the SCAT TRAK 545 1999 Parts Catalog – OEM Factory Manual and SCAT TRAK 545W 1999 Parts Catalog – OEM Factory Parts Manual follow the same factory format.

If you want to check the broader context of why OEM documentation matters in the Automotive Industry Overview, you’ll see that original equipment specs are the legal standard for liability and safety. I don’t take shortcuts on parts identification – and neither should you. Another good read is the Automotive Industry Overview for understanding the difference between factory and aftermarket data.

FAQ – Two Questions I Get Asked Every Week

Can I use this catalog to find part numbers for the hydraulic pump on my 234s?

Yes. Group 01 covers the hydraulic and electric system. Look for figure 010 (undercarriage) or the pump-specific figures. The part code will be listed next to the exploded view. Match it against your machine’s serial number using the usage codes on page 1.

Does this include the engine valve clearance specs?

No – this is a parts catalog, not a service manual. It only lists part numbers. You need the factory service manual for clearance specs.

Don’t waste hours chasing mismatched part numbers or trying to cross-reference a blurry scan. Get the real deal. Access the Factory Manual and keep it in your toolbox. Your machine – and your wallet – will thank you.