Description

SCAT TRAK 254s 2001 Parts Catalog

If you own a SCAT TRAK 254s mini excavator and need to replace a bucket, a key, or a hydraulic component, ordering the wrong part wastes your time and money. This is the factory SCAT TRAK 254s 2001 Parts Catalog — 148 pages of OEM part numbers and exploded views. Not a reprint. Not a third-party scan. This is the original document used by dealers to source components. You get the same diagrams and reference codes that came with the machine when it left the factory.

148 Pages of OEM Specs

This parts catalog covers every stocked part for the 254s. Page after page of exploded views, reference numbers, and part descriptions. You get the same abbreviations used in the dealer network: REF for reference, SX for left-hand, DX for right-hand, and so on. The catalog tells you which parts are only available as assembly units (marked NF). No guesswork — you see exactly what you need to order.

Bucket Options and Part Numbers

The catalog lists buckets for the 254s with bolt-on teeth, ditch-cleaning buckets, and hydraulic-swiveling versions. Each bucket has its own part number, weight in pounds, capacity in cubic feet, and suggested list price (dated March 2000). Example: the 14″ (350mm) bucket with teeth, part 5020113, weighs 106 lb and holds 3.9 cubic feet. If you need the 24″ (600mm) bucket, it’s part 5020115 at 318 lb. This section alone saves you from calling a dealer with the wrong dimensions.

How Is This Parts Catalog Organized?

Start at the front: the “How to Use This Catalog” page explains the reference codes. Every section follows the same layout — a diagram with numbered callouts, then a table listing each callout’s part number, description, and quantity. Need a replacement key? Turn to the keys page: ignition key is part 8223438, fuel and hydraulic fill cap key is 1321294, rear door and tool box key for the 254s is CH 751 (part 132137). The catalog also includes price lists for attachments as of March 2000.

Ignition and Fuel Cap Keys: Finding the Right Part

The catalog dedicates a page to keys because losing a key on a job site shuts you down. It shows which key fits which model and lists the part number. For the 254s, the rear door and tool box use a CH 751 key — a common size, but you still order the OEM part 132137. Don’t guess. Use the catalog to match the key to your machine’s year and series.

Why OEM Factory Documentation Matters

Aftermarket parts catalogs often reuse old drawings or omit superseded parts. This manual comes from the original 2001 print run. Every part number references the exact component SCAT TRAK designed for the 254s. If you’re swapping a bucket, the catalog tells you which mounting option (pin-on) matches your machine. If you need a seal or a hydraulic line, you cross‑reference the diagram. Without this catalog, you risk ordering a part that doesn’t fit or waiting days for the wrong item to arrive.

Related parts catalogs for other SCAT TRAK models: SCAT TRAK 545 1999 Parts Catalog – OEM Factory Manual, SCAT TRAK 545W 1999 Parts Catalog – OEM Factory Parts Manual, SCAT TRAK 535 1999 Parts Catalog – Factory Specs & Diagrams.

For context on the broader construction equipment industry, see this Automotive Industry Overview and also Automotive Industry Overview.

Frequently Asked Questions

Is this the same as a service manual?

No. This is a parts catalog with exploded diagrams and part numbers only. It does not contain repair procedures, torque specs, or fluid capacities.

Can I use this catalog for other SCAT TRAK models?

It is specifically for the 254s mini excavator. However, some parts (like keys and standard buckets) may cross‑reference to other models in the 5‑series family. The catalog includes a separate section for common attachments that fit multiple models, but always verify with your machine’s serial number before ordering.

Does it include wiring diagrams?

No.

How do I read the reference codes like SX and DX?

Right and left are from the operator’s seat looking forward. SX means left side, DX means right side. INF = lower, SUP = upper, ANT = front, POST = rear. These codes appear in the callout tables next to each part.

Stop guessing which part fits your SCAT TRAK 254s. Get the factory documentation that dealers use. Access the Factory Manual now.