Description

Sakai SW652-1 Parts Catalog

You’ve got a SW652-1 vibrating roller down because you ordered the wrong hydraulic hose three times. I’ve seen it. Guy spends more time on the phone with the parts counter than under the machine. That stops here. This is the OEM Sakai SW652-1 Parts Catalog—114 pages of factory exploded diagrams and part numbers for the Kubota V3307-DI-T-KDN engine, the fuel system, the cooling system, and every hydraulics group from the steering cylinder to the vibrating roll.

That’s not a reprint or a third-party scan. It’s the original Japanese/English PDF from Sakai, with the same table of contents you’d get at a dealer. Page 4 lists every group: Lighting System, Lamp_Switch, Engine System Fuel System, Cooling System, Intake, Exhaust, Control Throttle, Control Reversing, Steering Hydraulic, Steering Wheel, Steering Cylinder, Drive Hydraulics, Vibrating Hydraulics, Brake, Frame, Sound Suppress, Seat, Seat Belt, Canopy, ROPS, Scraper, Sprinkler, Battery, Instrument Panel. That’s coverage.

Stop guessing. Use the catalog.

Sakai SW652-1 Parts Catalog: What You Get with 114 Pages

Each page is a clean exploded view with numbered key references. The part numbers are direct from Sakai’s factory release. You don’t need to cross-reference aftermarket sites that show you a blurry diagram and a part number that may or may not fit. This catalog tells you exactly which chassis number range each part applies to. See page 2-3 for the guide on how to read the applicability columns—like “~No.10007” means up to machine number 10007. Order the wrong range and you get the wrong part.

Engine and Fuel System: Page 4 Breakdown

The Engine System Fuel System section on page 4 covers the Kubota V3307-DI-T-KDN engine mountings, fuel lines, injectors, and filters. It’s grouped with the Cooling System right below it. If you’re chasing a fuel leak or need a radiator hose, start here. The diagrams show each gasket, seal, and bracket with a part number. No guessing which O-ring fits the injector return line. It’s on the page.

Steering System Cylinder: Why the Right Part Number Matters

The Steering System Cylinder group (page 4 in the TOC) includes the steering cylinder itself, pins, seals, and hoses. On a vibrating roller, the steering cylinder takes a beating from constant articulation. One wrong seal kit and you’re tearing it apart again. This catalog lists the OEM seal kit part number for the specific cylinder assembly. You can order the assembly as a unit (cf. notation) or individual parts. If you need just the rod wiper, the catalog has it.

3 Reasons to Choose OEM Over Aftermarket Reprints

One: part numbers are verified against the actual production build. Aftermarket catalogs often copy old revisions or guess based on photos. Two: this catalog includes chassis-specific notes. That matters when Sakai made running changes mid-production. Three: the exploded views show assembly order. Even though this is a parts catalog, the diagrams help you understand how the cooling fan, fuel pump, and hydraulic block mate together. You don’t get that from a text list.

Get the Right Part Number for the Cooling System

The Cooling System section is on page 4. Radiator, fan, shroud, hoses, and the expansion tank. If your SW652-1 overheats because the fan belt tensioner pulley bearing seized, you need the correct pulley part number. It’s in the catalog. You also get the water pump gasket and thermostat housing gasket numbers. Ordering the wrong water pump for a Kubota V3307-DI-T-KDN is easy if you just eyeball it. This catalog prevents that.

Order Parts by Chassis Number

Before you click add to cart, locate your chassis number. It’s stamped on the frame near the front—the catalog shows the location on page 3. The model is SW652-1, and the chassis number format is 1SW47-00000. Cross-reference with the applicability column. If your machine is No. 10008 or later, parts marked “No.10008~” apply. Ignore that and you might bolt on a part that’s five millimeters off. I’ve seen it.

If you need the operator’s manual for daily operation, grab the Sakai SW652-1, SW652ND-1, SW652B-1 Operators Manual – Factory Specs. For other Sakai rollers, the SAKAI SW770HF Vibrating Roller Parts Catalogue and SAKAI SW880 SW990 Parts Catalogue are here too.

The manufacturing standards behind these machines are rooted in global automotive practice. You can read more about that in the Automotive Industry Overview on Wikipedia. The chassis numbering system follows similar logic—a model prefix and sequential number. Automotive Industry Overview gives useful background on vehicle identification standards.

Does this catalog contain service procedures or torque specs?

No. This is a parts catalog only. It does not include repair steps or torque values. You need the separate service manual for that.

Can I use this catalog for the Sakai SW652ND-1 or SW652B-1?

Not directly. While the chassis might share some components, part numbers can differ. The SW652-1 catalog is specific to that model. For the SW652ND-1 or SW652B-1, you need the separate operator’s manual or their own parts catalog. Do not assume parts are interchangeable even if they look the same. The catalog includes chassis number ranges (e.g., ~No.10007) that tell you exactly which parts apply. Using the wrong catalog can result in ordering a part that doesn’t fit, which means downtime and return shipping costs. Always verify your model and chassis number before ordering. If you have a SW652-1, this catalog is correct.

What engine does the SW652-1 use?

KUBOTA V3307-DI-T-KDN. It’s listed on the cover page.

How do I read the chassis number in this catalog?

Page 3 explains it. The model number SW652-1 is followed by a chassis number like 1SW47-00000. The catalog notes applicability: ‘~No.10007’ means up to machine number 10007, ‘No.10008~’ means from 10008 onward. Always check that before ordering.

You need factory-correct part numbers for your Sakai SW652-1. Don’t waste another shift waiting for the wrong seal or cylinder. Access the Factory Manual and get the right part the first time.