Description

Raptor RAPTOR DH 2011 Parts Catalog – OEM Factory Part Numbers

I’ve been turning wrenches since before most of you were born, and if there’s one thing that burns my tail it’s ordering a seal kit for a Raptor DH and getting the wrong one because some third-party catalog took a guess at the part number. This Raptor RAPTOR DH 2011 Parts Catalog is what the factory shipped with the machine. 358 pages of genuine OEM part numbers, exploded views, and bill-of-materials lists that match exactly what Subterra Maquinaria Minera used when they built the JMC-155 jumbo. No reprints, no internet translations – straight from Resemin S.A.

CHASIS: Frame, Axles, and Undercarriage Parts

The chassis section runs over 60 pages inside this Parts Catalog. You’ll find the OEM part numbers for tires (part 0140 15003, size not listed), rims (0139 15005), and the hydraulic drive motor (0402 03002). Page 3 of the manual lists the main components including the DEUTZ TD 2011 diesel engine – 57.6 kW at 2600 RPM, serial 10664330. If you need to order a replacement pump or motor, this is where you start. Don’t trust aftermarket cross-reference tables; use the factory index.

SISTEMA HIDRÁULICO: Hydraulic System Breakdown

Forty-four pages dedicated to the hydraulic system, covering everything from the Sauer Danfoss 90R075 transmission pump to the Parker P315A19 positioning pump. Each component gets its own exploded diagram with a part number table. The manual shows the Rexroth A10V100 pump and four Poclain MSE08 hydrostatic motors. If you’re rebuilding a cylinder, the seal kit numbers are listed right next to the cylinder drawing – for example, the gato cylinder seal kit is part 0406 80021. No need to measure seals and hope.

7 Systems Covered in This Parts Catalog

The table of contents breaks the machine into eleven major sections, but seven of them are core mechanical/electrical systems: DIAGRAMAS, SISTEMA HIDRÁULICO, CHASIS, CORREDERA LATERAL, VIGA, SISTEMA ELÉCTRICO, SISTEMA LUBRICACIÓN-AIRE-AGUA, SISTEMA AUTOMOTRIZ, MOTOR DIESEL, and COMPRESOR. The compressor section (LE3-10) includes its own hydraulics, chassis, and bombas sub-sections. That’s a total of 358 pages of factory data – enough to rebuild the entire jumbo from the ground up without ever calling a dealer for a part number.

Does This Manual Cover the Electrical System?

Yes, it does. Pages 1–13 of the SISTEMA ELÉCTRICO.pdf cover the WEG 100HP motor (1780 RPM, 440VAC, 60Hz), the remote control panel MR12 assembly (part 1008 07016), and the stainless steel automotriz panel (0701 01007). Wiring diagrams? They’re in the DIAGRAMAS section (3 pages), showing harness connections for the electrovalve box and the main tablero electrico. If you’re chasing a gremlin in the controls, start there.

Get the Right Part Numbers from the OEM Index

The index at the front of this Parts Catalog lists every component’s part number, quantity, and description. For example, the boom cylinder (CILINDRO DE LEVANTE) is part 0401 03080, quantity 2, and its seal kit is 0406 32010. The stinger cylinder seal kit is 0406 63020. You can order the exact O-rings and wiper seals without disassembling the cylinder first. That’s the difference between a factory catalog and a generic parts list – precision.

Source Validity: Factory OEM vs Aftermarket Reprints

I’ve had juniors bring me aftermarket parts catalogs that said “fits Raptor DH” and were missing half the part numbers for the corredera lateral. This manual is the original 2011 release from Resemin, scanned from the actual binder that shipped with the JMC-155. The file name on the original PDF is RAPTOR_DH_2011_Parts_Catalog_es-93314016724.pdf. That’s the real deal. If you’re working on a Subterra RAPTOR DH, using anything else is a gamble with your time and your shop’s money.

Is this manual in English?

No, it’s in Spanish. But part numbers are universal.

Can I use this for a different Raptor model like the Raptor 44?

This catalog is specifically for the RAPTOR DH (JMC-155) built in 2011. The hydraulic pump configurations, engine model (DEUTZ TD 2011), and chassis dimensions are unique to this model. While some components like the Parker motors or WEG electric motor might cross over, the part numbers for the boom, stinger cylinders, and corredera are unique. If you need data for a different Raptor jumbo, you’d want that model’s own Parts Catalog. Using this one for a Raptor 44 will lead to wrong seal kits – I’ve seen it happen.

If you’re tired of playing part-number roulette with aftermarket catalogs, this is the file that will get the job done right. Access the Factory Manual and keep it on your shop tablet – you’ll use it every time a Raptor DH comes through the bay.

Related Manuals

• Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide
• Futura FC200-FC400 Parts Catalog – OEM Wear Parts Specs
• Longagribusiness 410 DTC, 450, 450 DTC, 470 DTC, 530 DTC 2002 Parts Catalog

External reference: Automotive Industry Overview – not specific to this machine but relevant for background on heavy equipment manufacturing.