Description

Powerscreen International Distribution CHIEFTAIN 2100 Parts Catalog

I’ve spent 28 years turning wrenches and chasing parts that don’t fit. Aftermarket parts catalogs are garbage – wrong numbers, missing figures, dimensions that don’t match. This one is different. This is the Powerscreen International Distribution CHIEFTAIN 2100 Parts Catalog straight from the factory. 156 pages of actual OEM part listings, not some scanned reprint that someone ran through OCR twice. If you’re rebuilding a 2-deck or 3-deck tracked screener, you need the real specs, and this is it.

What the Manual Covers – Section by Section

The table of contents runs from 01-01 through 14-01, plus an index. You get General Information (9.1) that spells out exactly what to do when ordering: state machine type and serial number, give Item No., Part No., Description, and Fig. No. That’s not optional – skip it and you get the wrong part. Section 9.2 Parts Ordering Procedure lays out the four steps they expect. Then 9.3 Contact Details – both Powerscreen International Distribution Ltd. and Terex Crushing Inc. – so you can call the right people. After that, 9.4 Index to Spare Parts Listings and 9.5 Spare Parts Listings with actual exploded-view figures and OEM part numbers. The whole thing ends with 9.6 Index of Parts and a master Index. None of that “refer to dealer” nonsense – it’s all here.

CHIEFTAIN 2100: Why OEM Part Numbers Matter

I’ve seen guys bolt on a “compatible” bearing or wear plate from a third-party catalog, then spend two days pulling it back out because the bolt pattern was off by 2 mm. The CHIEFTAIN 2100 uses specific flanges, screens, and drive components that Powerscreen engineered. This manual gives you the exact number for every part – from screen mesh to hydraulic filters. On page 1 it says: “Only spare parts from the original equipment manufacturers can be relied to do so.” That’s not marketing – that’s a guarantee that the part will seat correctly and not void your warranty. If you’re in a shop in San Antonio like mine, downtime eats your paycheck. Use the right number the first time.

Parts Ordering Procedure – Step by Step

Flip to Section 9.2. It tells you:
1. State machine type and serial number (found in Section 1 – Technical Information).
2. State clearly Item No., Part No., Description, and Fig. No.
3. State quantity ordered.
4. State name, address, delivery method.
That’s it. No guessing. No “I think this is the right part.” The manual is built around those figure numbers – every exploded view has callouts that match the tables. If you lose track of the figure you’re on, check the Section bookmarks like 04-03, 08-03B, etc. They’re consistent.

Who Should Buy This Manual?

If you own or maintain a Powerscreen CHIEFTAIN 2100 – wheeled or tracked, 2-deck or 3-deck – you need this. Home garage guys? Probably not unless you’ve got a screener in your backyard. But if you work for a rental yard, a crushing operation, or a dealership, this saves your parts guy from calling the distributor every other day. It’s also for the mechanic who wants to verify that the replacement screen panel matches the original bolt pattern before he breaks a tap.

Source Authenticity – OEM vs. Aftermarket

This is a direct scan of the original Powerscreen International Distribution Ltd. publication, Issue 01 EG, starting from machine serial number 12400001. It’s not a third-party compilation. Aftermarket catalogs often renumber figures or leave out pages because they don’t have distribution rights. This one has the full TOC, the Index, and every figure from 01-01 through 14-01. If you compare it to a knockoff PDF, you’ll notice the missing pages – don’t get burned. For fastener torque specs and dimensional standards, cross-reference with SAE International Standards or directly at SAE International Standards.

FAQ

Does this manual include service procedures like engine rebuild or hydraulics?

No. This is a parts catalog – part numbers, figures, ordering info. Get the separate service manual for repair steps.

How do I find the correct part number if I don’t have the machine serial number?

You need the serial number. It’s stamped on the machine plate and referenced in Section 1 – Technical Information. Without it, the catalog still helps if you can identify the figure and description, but Powerscreen’s ordering procedure explicitly requires serial number for accuracy. If you’re pulling parts off a used machine with no plate, look for date codes on major components – those cross-reference to the figure numbers in this catalog. The Index (Section 9.6) lists part numbers alphabetically, so if you have a part in hand you can look up its number and figure. But the safest path: find the serial number before you order anything. Otherwise you might get the wrong deck configuration – the CHIEFTAIN 2100 has both wheel and track variations and the screen frame parts differ.

Related Manuals

• Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide
• Futura FC200-FC400 Parts Catalog – OEM Wear Parts Specs
• Longagribusiness 410 DTC, 450, 450 DTC, 470 DTC, 530 DTC 2002 Parts Catalog

Don’t waste time cross-referencing part numbers from a bootleg copy. Get the real thing – 156 pages of factory-sourced data that tells you exactly what goes where. Access the Factory Manual now and keep it on your tablet next to the impact gun.