Description

New Holland 8361 SI Parts Catalog – 96 Pages of OEM Engine Parts Breakdown

You have a New Holland 8361 SI engine on the bench. Maybe it’s an 8361 SI A 005 or an 8361 SI A 006. The aftermarket parts catalogs don’t match the casting numbers. You waste two hours cross-referencing before you give up and order the wrong oil pan gasket. I’ve been there. That’s why this New Holland 8361 SI Parts Catalog exists – it’s the original factory document, 96 pages long, printed by New Holland for Fiat engines. No third-party re-draws. No photocopies of faded originals. Just the parts breakdown you need to get the job done.

New Holland 8361 SI Parts Catalog – Engine Sections Breakdown

Open the catalog and you’re looking at Section 2 right away. Page 2 lists the technical codes – 8361 Si10, 8361 Si A 005, 8361 Si A 006. Page 3 shows the table of tables: every engine component from ENGINE (table 01.00/2) down to FUEL PUMP (table 14.08/1). The sections cover CYLINDERS, CRANKCASE, CYLINDER HEAD, OIL SUMP, CYLINDER HEAD COVER, CRANKCASE COVERS, INTAKE MANIFOLD, ENGINE BREATHERS, EXHAUST MANIFOLD, ENGINE SUSPENSIONS, CRANKSHAFT, CONNECTING RODS, PISTON, FLYWHEEL, DAMPER, GEAR DRIVE, DRIVE GEAR, VALVES AND SPRINGS, INJECTION PUMP, INJECTION PUMP DRIVE, ADVANCE VARIATOR, NOZZLES, and FUEL PUMP components. Every table has its own page number. You don’t guess – you flip to the right table.

Parts Identification: Cylinder Head and Injection Pump

Need a cylinder head cover gasket? Table 06.02 lists it with the factory part number. The injection pump assembly is under table 14.00/3 – includes the drive and advance variator. The catalog gives you exploded diagrams with callouts. Compare your old part against the drawing. If the bolt pattern matches, you order that number. No measuring, no returning. I’ve used this catalog to identify a connecting rod for an 8361 SI that some previous owner had swapped from a different Fiat engine – the drawing made it obvious in under a minute.

What Engine Systems Are Covered?

Everything from the crankcase covers to the fuel pump components. The OCR excerpt shows tables for ENGINE (01.00), CYLINDERS (06.00), CRANKCASE (04.00/2), CYLINDER HEAD (06.01/1), OIL SUMP (04.02/2), CRANKCASE COVERS (04.03/2), INTAKE MANIFOLD (06.03/2), ENGINE BREATHERS (04.04/1), EXHAUST MANIFOLD (06.04/2), ENGINE SUSPENSIONS (04.05), CRANKSHAFT (08.00/2), CONNECTING RODS (08.01/1), PISTON (08.02/2), FLYWHEEL (08.03/2), DAMPER (08.04/1), GEAR DRIVE (10.00/1), DRIVE GEAR (12.00), VALVES AND SPRINGS (12.03), INJECTION PUMP (14.00/3), INJECTION PUMP DRIVE (14.01/2), ADVANCE VARIATOR (14.02/2), NOZZLES (14.08/1), FUEL PUMP (14.08? Actually 14.08/1). That covers the entire engine – from the oil sump up to the cylinder head and from the front gear train to the injection system.

3 Critical Sections for Rebuilds

If you’re rebuilding an 8361 SI, three tables matter most: CRANKSHAFT (08.00/2) for bearing shells and thrust washers, PISTON (08.02/2) for rings and pins, and CYLINDER HEAD (06.01/1) for valves and springs. Without the factory part numbers, you risk buying aftermarket rings that are 0.5mm too thick. The catalog gives you the exact OEM reference. Pair it with a service manual for torque specs, and you’ll have a solid rebuild.

Factory Source vs Aftermarket Parts Lists

I tell every tech in my shop: if it’s not an OEM New Holland catalog, double-check every number. This one is printed by New Holland, issue 9504439 2. The note on page 1 says it must be used in conjunction with Fiat engine catalogue issue 497085 3 – that’s how precise they were about cross-referencing. Aftermarket catalogs often merge multiple engine versions into one drawing. This catalog splits the 8361 SI A 005 from the 8361 SI A 006 where they differ. You can’t get that from a third-party publisher.

Who This Catalog Is For

Home garage guys who bought a used 8361 SI engine from a salvage yard. Mechanics maintaining combine harvesters or industrial equipment that uses this Fiat engine. Parts counter staff who need to look up a genuine New Holland number without sending the customer away. Beginners who want to learn the engine layout without relying on a Haynes manual that covers ten different models. If you can read a parts diagram, you can use this catalog.

Related Manuals

If you work on other Ford New Holland models, check out the Ford New Holland 853 1993 Parts Catalog. For smaller tractors, see the Ford New Holland 568 1991 Parts Catalog. The Ford New Holland 1915 Tractor 1993 Parts Catalog – Section: Supplement covers later models with similar injection pumps.

FAQ – New Holland 8361 SI Parts Catalog

Does this catalog include part numbers for the injection pump drive?

Yes. Table 14.01/2 covers the injection pump drive with a full parts list.

Can I use this catalog for non-New Holland engines?

The catalog is specific to New Holland 8361 SI engines (Fiat base). If you have a Fiat engine from another application, the tables may still be correct, but you need to verify against the Fiat engine catalogue issue 497085 3. The catalog itself warns that it must be used with that Fiat manual. I would not trust it for a completely different engine family like a Ford 6.0L Powerstroke – the parts will not match.

How many pages is the catalog?

96 pages. That includes all tables and the engine identification section.

Does it cover the cylinder head cover gasket?

Table 06.02 lists the cylinder head cover and its gasket. The part number is there.

Every time I see a tech ordering parts by guesswork, I want to hand them this catalog. It saves more time than any diagnostic tool. You have the part number in front of you, you order it, you install it. No returns. No second-guessing. For a real-world example of how industrial engines are documented, see the Automotive Industry Overview. And for another perspective on factory documentation standards, check the Automotive Industry Overview. Stop chasing numbers from memory. Access the Factory Manual from AutoRepairManuals and keep it on your phone or tablet right next to the engine stand.