Description

Michigan 75 III Parts Catalog – Factory Parts Breakdown for Model 75 III Tractor Shovel

You are ordering parts for a Michigan 75 III tractor shovel and the aftermarket catalog you have shows the wrong brake line or a different valve assembly. I’ve seen it. A guy spends an hour cross-referencing part numbers, gets the wrong wheel cylinder, and the machine sits. That waste stops the day you open the factory Parts Catalog. This is the original Clark Equipment Company document—224 pages of exploded diagrams, factory part numbers, and the exact index Clark used on the assembly line. No third-party reprints, no scanned-from-copies garbage. You get the raw data Michigan intended for the 75 III.

What You Get in 224 Pages of Factory Parts Data

The index alone tells you this is serious. From Accelerator Pedal and Linkage (page 41) to Brake Wheel Cylinder (page 85), every assembly is broken into individual parts. You see the Air Brake Valve on page 94, the Bucket Cylinder Assembly on pages 122-123. The catalog uses the exact same numbering system as the assembly plant. If you need a part for the Engine section (pages 1-4), you get the same part numbers Clark stamped into the manuals for the 75 III G.M. and Wauk. versions.

Engine and Transmission: Where Aftermarket Catalogs Get It Wrong

Take the Transmission air breather. Aftermarket catalogs often list one part for multiple models. This manual gives you separate entries: Transmission Air Breather (page 49, 51) and Torque Converter Air Breather (page 57, 59, 61). Same with the Valve assemblies—the 2-spool control valve assembly spans pages 135-147, the 3-spool spans 153-167. You torque a line into the wrong port because a generic diagram showed a different routing? Not with this. Every port, every seal, every cartridge kit is drawn and numbered.

Brake System and Valve Assemblies: OEM Part Numbers You Can Trust

The Brake section covers front and rear brake assemblies (pages 83, 84), the parking brake lever assembly (page 91), and the air brake valve (page 94). Air lines, reservoirs, pressure gauges—everything has a Clark part number. If you need the Air Brake Pedals, they’re on page 94 with the same reference as the shop manual. Torque values are not in a parts catalog—this is for part identification only—but you can pair it with the service manual to know exactly which fastener goes where.

Who Should Buy This Manual?

If you maintain a Michigan 75 III in a fleet, you need this. If you’re a home garage guy trying to rebuild a bucket cylinder, you need this. The exploded view on page 122 shows each seal, each retaining ring, each hose fitting. No guesswork on what size or thread. The same applies to the steering cylinder assembly on pages 111-112. You get the drag link assembly, the steering column—all with factory illustrations. Anyone trying to rebuild a machine with a mix of used parts will save hours by comparing what Clark originally installed.

Related Manuals

• Michigan Model 75 III Tractor Shovel Parts Manual
• VOLVO BM 125C Wheel Loader Parts Catalog
• Michigan 851 Parts Catalog – 72-Page Factory Parts Manual

For background on heavy equipment design, check the Automotive Industry Overview. That context explains why Clark used specific thread pitches on the 75 III—something aftermarket catalogs ignore.

Frequently Asked Questions

Does this manual include torque specifications?

No. This is a parts catalog, not a service manual. Torque values are in the separate service manual. You get part numbers and exploded views only.

Will this manual cover the GM diesel and Waukesha gas versions?

Yes. The front cover lists serial numbers: 75 III G.M. – 7CG101 and After, Wauk. – 6CA101 and After. Both engine families are covered in the Engine and Accessories section (pages 1-4). The same part numbers apply to either powerplant unless noted.

How many pages does the catalog contain?

224 pages, indexed from cover to cover. The index runs from A to C in the sample—but the full PDF includes every letter. It covers everything from the cab wiring harness to the counterweight.

Can I use this manual to rebuild the hydraulic system?

You can identify every component of the Bucket and Boom Hydraulic System (pages 125-131), the 2-spool and 3-spool control valves, and the hydraulic reservoir filter element (page 65). You will need the service manual for disassembly procedures and seal installation directions, but this catalog tells you which part to order.

If you work on a Michigan 75 III, this is the only parts catalog you need. The factory part numbers, the exploded layout, the cross-references—they are all here. Stop cross-referencing aftermarket books that show a different air breather location. Access the Factory Manual now and get the right parts the first time.