Description

Michigan 35 AWS – R Parts Catalog – Factory OEM Breakdown

If you’ve ever had a loader down because someone ordered the wrong brake cylinder or a prop shaft that didn’t match, you know the cost of guessing. The Michigan 35 AWS – R Parts Catalog is a factory-original document – 183 pages of exploded views, genuine part numbers, and assembly breakdowns. This isn’t some aftermarket reprint with fuzzy drawings. It’s the same book the dealer’s parts counter uses.

I’ve spent 28 years turning wrenches, and the first thing I do when a machine comes in with a blown brake or a leaking cylinder is pull the parts manual. Without it, you’re gambling. This manual gives you the exact part numbers for every component – from the Brake Assembly, Parking (page 56) to the Bucket and Boom Hydraulic System (page 21). No guessing, no calling three different suppliers hoping one matches.

Keep in mind, this is a Parts Catalog, not a service manual. You won’t find step-by-step removal procedures. What you get is a complete index of every screw, seal, gear, and cylinder on the machine. If you need to rebuild a front axle or order a steering cylinder, this is the document that makes sure you get the right piece the first time.

What’s Inside the 183-Page Breakdown

The index covers 50+ groups, and I’ll give you a handful of examples that matter most in a busy shop:

• Brake Assembly, Front-Rear – exploded view with wheel cylinder part numbers. No more mixing up left and right.
• Clutch – Forward, Reverse and Low – includes the clutch pack and high-range clutch on separate pages.
• Main Hydraulic System – full pump, valve, and hose routing. Critical for tracking down leaks.
• Differential and Carrier Assembly – Front Axle and Rear Axle – separate pages for each because they are not the same.
• Propeller Shaft Assembly – U-joint and yoke part numbers.

Each section lists the part number, description, and quantity. You can cross-reference with your machine’s serial number to avoid buying a part that doesn’t fit. The manual is organized by assembly, so you can jump right to the group you need without flipping through fifty pages.

Does This Manual Cover the Brake System?

Yes, and it does it the way a factory manual should. The Brake section is split into four sub-groups: Brake Assembly, Parking (page 56), Brake Assembly, Front-Rear (pages 45, 51), Brake Controls, Parking (page 57), and Foot Brake Controls (page 58). Each page shows the exploded diagram with callouts. You get the part numbers for the master cylinder (page 54), wheel cylinders, shoes, springs, and even the parking brake linkage (page 44). No guesswork – just a direct line to the correct replacement part.

For anyone working on a Michigan 35 AWS – R, the brake system is a common failure point. Having the factory part numbers saves you the headache of ordering a cylinder that looks right but is actually for a different model year.

Who Needs This Parts Catalog?

This manual is for the guy who owns a Michigan 35 AWS – R and doesn’t want to pay dealer markup for part research. It’s for the shop that has two of these loaders in the fleet and needs to stock common wear items like brake shoes, seals, and hydraulic hoses. The DIY mechanic who bought a surplus loader at auction will also find it useful – but only if you’re comfortable reading exploded diagrams and matching part numbers to what’s on your machine.

A word of caution: this document is a photocopy of the original factory print from Belgium. The drawings are clean, but the paper quality is typical of 1970s–80s offset printing. Some pages have light text where the original was over-inked. The content is complete, but don’t expect glossy magazine quality.

Source Validity: OEM vs Aftermarket

I have a junk drawer full of aftermarket parts catalogs that list “equivalent” part numbers that don’t exist. This one is different. It was printed by CLARK LA BRUGEOISE ET NIVELLES S.A. – the actual manufacturer of the Michigan 35 AWS – R. The page headers say “MICHIGAN PARTS MANUAL” and the index matches the original binding. There’s no third-party interpretation. If you’re ordering parts, you use the part numbers from this manual, and they will match what Clark built.

For context, the automotive industry has a long history of counterfeit parts and wrong cross-references – read the Automotive Industry Overview for background. But with an OEM catalog, you skip that risk entirely.

3 Groups You’ll Use Most Often

Based on my experience, here are three sections that get heavy use in a shop that services these loaders:

1. Bucket and Boom Hydraulic System (page 21) – Every hose and fitting is listed. When a boom cylinder seal blows, you need the exact seal kit number.
2. Axle Assembly, Front Drive Steer (page 42) – Pinion bearings, ring gear, and carrier parts. Critical for axle rebuilds.
3. Electrical Equipment & Wiring (page 59) – Not a full wiring diagram, but it lists all switches, lights, and harness part numbers. Good for replacing damaged connectors.

You’ll also find the Cab Assy (page 63) and Cockpit (page 9) groups if you’re restoring the operator area. The manual covers everything from the accelerator pedal linkage (page 7) to the muffler (page 5) and fuel tank lines (page 6).

Frequently Asked Questions

Will this manual help me install a new brake master cylinder?

No. This is a parts catalog – it shows the master cylinder assembly with part numbers (page 54), but does not include removal, installation, or bleeding procedures. You need the service manual for that.

Does the manual include hydraulic hose part numbers for the steering system?

Yes. The steering hydraulic system (page 24) and steering gear assembly (page 23) both list hoses, fittings, and cylinder seals. However, because hoses can be superseded, always verify with your distributor using your machine serial number. The part numbers in this catalog are the original factory numbers – some may have been replaced by updated versions. Still, they give you a solid starting point.

If you’re tired of calling the dealer for every part number, this manual pays for itself on the first order. Access the Factory Manual and keep a copy in the shop computer or print it out for the parts room.

Related manuals you might need: VOLVO BM 125C Wheel Loader Parts Catalog and Michigan 851 Parts Catalog – 72-Page Factory Parts Manual. For a different Michigan model, check Michigan 85III 1965 Parts Catalog – Factory OEM Parts Breakdown.