Description

Michigan 110 III-H-14 Parts Catalog

If you are wrenching on a Michigan 110 III-H-14 Hancock tractor scraper and you need to order a replacement brake valve or track down a part number for the steering cylinder, this manual is why you stop guessing. I have been turning wrenches for 28 years, and nothing slows a rebuild like a wrong part showing up. This is the factory Parts Catalog – not a reprint, not a third-party scan, not a repackaged aftermarket PDF. It is the original Clark Equipment Company document, 116 pages, covering the tractor section of the Model 110 III-H-14 (14 cu. yd.) Hancock scraper for machine serial numbers G.M. – 7TGH101 and after.

Parts Catalog vs Service Manual: Know the Difference

This is a parts catalog, not a service manual. There are no torque specs, no repair procedures, no step-by-step rebuild instructions. What you get is an exploded-view parts breakdown with part numbers, quantities, and cross-references to the assembly groups. You need a new air brake valve? Flip to the Brake section. Need the o-ring kit for the transmission hydraulic shift control valve? That is on page 35. The index at the front lists every component alphabetically – from Accelerator Pedal to Yoke. Use this manual to order the correct Clark-approved replacement parts from your distributor. Do not try to use it as a repair guide; that is a different document.

What This Manual Covers: Brake and Valve Systems

Two systems that always cause headaches on these machines: the air brake system and the hydraulic control valves. The catalog has dedicated sections for Brake assembly – front brake (page 49), parking brake assembly, brake air chamber, brake slack adjuster, and the air brake valve itself. For Valve work, you get the cockpit hydraulic shift control valve assembly (page 35), the transmission hydraulic shift control valve, the steering control valve, and the check valve used in the air system. Each exploded view includes the part number and description. If you have ever tried to match a valve spool by eye at the parts counter, you will appreciate having this in your hand.

Index and Page Layout: How to Find Parts Fast

The index runs from A to Yoke. Look up “Brake Valve, Air” and you are sent directly to page 57. Need the “Air Brake Valve” – same page. The manual uses industry-standard exploded views with callout numbers that match the part list at the bottom of each page. No guesswork about which bolt belongs where. For example, the torque converter assembly (pages 39 and 41) shows the converter charging pump separately from the housing. Transmission control cover assembly is page 33. Hydraulic system piping for the elevator motor is on page 85-89. You can find the exact part number for the steering system oil filter, the transmission oil filter, the air cleaner element – everything is listed.

Why OEM Documentation Matters for Construction Equipment

Aftermarket parts books for these older Michigan machines are full of mistakes. I have seen a generic catalog call out the wrong brake slack adjuster for a 110 III-H-14 because the aftermarket vendor assumed it shared parts with the 110 series. This OEM catalog was printed by Clark Equipment Company specifically for the Hancock scraper with serial numbers G.M. – 7TGH101 and after. The part numbers are Clark-approved. If you order from the numbers in this catalog, you get the right piece. If you rely on a third-party list, you will be returning parts and losing billable hours.

Related manuals: Michigan 110 III-H-14 Tractor Scraper Parts Manual, Volvo BM Michigan 125C 1988 Parts Catalog – Factory OEM Parts Manual, Michigan 851 Parts Catalog – 72-Page Factory Parts Manual. For a broader look at the industry, check out Automotive Industry Overview Automotive Industry Overview.

Audience Fit: Who Needs This Manual

This is for anyone who owns, operates, or maintains a Michigan 110 III-H-14 Hancock scraper. DIY mechanics and home garage guys – if you have one of these in your yard, you need this PDF. Fleet shops that run multiple scrapers will use it daily for parts ordering. Even if you have the service manual, this parts catalog is the only way to get the correct part numbers for the brake valve, transmission case, steering assembly, and all the seals. Beginners should know that this manual does not show you how to rebuild an air brake chamber – it shows you what parts go into it. Use it alongside the service manual for a full picture.

Does this manual include torque specs?

No. This is a parts catalog, not a service manual. Torque values belong in the separate service repair manual.

Can I use this to identify parts for a 110 Series without the -H-14 suffix?

Not reliably. The -H-14 designates the 14-cubic-yard Hancock scraper. Many components differ from earlier 110 models. Check your machine serial.

How are the parts listed – by part number only?

Each exploded view has callout numbers referencing a table with part number, description, quantity, and where applicable, notes about serial number breaks. You also get page references in the index.

What if I cannot find a part in this catalog – does it mean it is not available?

It means the part is not listed in the tractor section. This manual covers only the tractor portion of the scraper. The scraper body, bowl, elevator, and cutting edges are in a separate manual. Check your distributor.

You need the exact part numbers to keep your Michigan 110 III-H-14 running and earning. Do not waste time with generic cross-references that may or may not fit. Access the Factory Manual now and get the official Clark parts data on your screen or printed out at the workbench.