Description

Manitou MVT 660 1995 Parts Catalog

Part numbers that don’t match. Diagrams that look like someone traced them from a napkin. A bolt that should fit but doesn’t. That’s what you get from aftermarket parts catalogs. This Manitou MVT 660 1995 Parts Catalog is the real deal – a factory-issued manual from Manitou’s own line in Castelfranco Emilia, Italy. 304 pages of OEM drawings, exploded views, and reference numbers that match the part on your shelf. Published 04/1995, it covers the MVT 660 with the 1004.4 diesel motor. If you’re tearing down a telehandler or ordering a hydraulic fitting, this is the document that keeps your parts order from becoming a return.

Manitou MVT 660 1995 Parts Catalog: Section Layout

Seven major sections break the machine into logical groups. Section 1 covers ruote (wheels). Section 2 handles raffred motore, circuito aspir. e scarico – engine cooling, intake, and exhaust. Section 3 is the portaforche (fork carriage), with a T.U.V. sub-section. Section 4 – braccio telescopico (telescopic boom). Section 5 – carrozzeria-telaio (body and frame) plus T.U.V. Section 6 jumps into cabina particolari (cab details) across six sub-sections (6-1 through 6-6) – that’s where you’ll find window seals, seat hardware, and control panel brackets. Section 7 – leve e comandi (levers and linkages). Every drawing in this parts catalog includes a reference number and a table with the part description in Italian, French, English, and German. That multilingual index means you can hand the catalog to any parts counter guy and he’ll know what you need.

7 Machine Systems Illustrated

Each section starts with a full-plate drawing – an exploded view that shows every nut, washer, seal, and bracket. Under each drawing, a parts table lists the item number, a SAGE code (the factory’s internal part numbering), the quantity used, and the part description. For example, the telehandler’s boom section (Section 4) includes the inner boom, outer boom, cylinder mounting brackets, wear pads, and the chain assembly. No aftermarket catalog gives you that level of detail because they don’t have the original drawings. This one does.

Trust Factory Drawings Over Aftermarket

Aftermarket parts catalogs often reuse old illustrations from a similar model and hope the part fits. That gets expensive when you order a brake caliper that turns out to be for a different axle ratio. This is a first-edition factory print – the same document Manitou dealers used when the MVT 660 was new. The drawings match the actual machine. Every reference number traces back to Manitou’s own inventory system. If you need a part for the cab latch or the hydraulic control linkage, the drawing on page 5 (the index) will point you to the right plate. Then you cross-check the reference number against the parts table. That’s it. No second-guessing.

Index on Page 5: Your Starting Point

Page 5 shows the full index in four languages. Each section number links to a plate number. For instance, Section 6 (CABINA) covers plates 6-1 through 6-6, each dedicated to a specific group of cab components. Want the right‑hand window? Plate 6-3. The floor mat? Plate 6-6. The index table also lists the T.U.V. – that stands for Tipo Unico Veicolo or homologation variant, so if your MVT 660 has a specific approval plate, check the T.U.V. sub‑sections for any non‑standard parts. That level of detail is absent from a generic scan.

Cab Details: Section 6 Breakdown

Six plates for the cab alone. Plate 6-1 covers the cab structure and main sheet metal. 6-2 dives into the interior trim and insulation. 6-3 shows the door panels, hinges, latch, and window frames. 6-4 – the roof hatch and seals. 6-5 – the rear panel with the engine access cover and vent grille. 6-6 – the floor plate, mat, and pedal brackets. Each plate has its own parts table with factory part numbers. If you need a door handle for a 1995 MVT 660, you look up plate 6-3, find the handle reference, and order by that number. No need to haul the handle to a dealer to match it by eye.

Does This Parts Catalog Cover the Engine?

Yes, Section 2 is dedicated to engine cooling, intake, and exhaust systems. The MVT 660 uses the 1004.4 diesel – a four‑cylinder naturally aspirated engine. That section covers the radiator, fan, intercooler (if fitted), air intake piping, exhaust manifold, muffler, and mounts. It does not include internal engine components like pistons, rings, or bearings – those are inside a separate engine service manual. For a deeper understanding of how the diesel engine works, read this Wikipedia article on diesel engines. For the parts that bolt onto the block – belts, pulleys, hoses – this catalog has them.

Who Needs This Manual?

You own a Manitou MVT 660 telehandler. You maintain it yourself. Or you run a small equipment repair shop where the dealer’s parts counter is an hour drive each way. You need to identify a hydraulic hose fitting, a cab seal, or a brake line bracket. This catalog gives you the factory part number so you order the right thing the first time. It saves you the downtime of waiting for the wrong part to arrive and then reordering. The 304 pages are scanned from the original 1995 publication, complete with fold-out drawings. No reprints, no cropped edges.

Source Authenticity: OEM From Manitou

This file is a direct digital copy of the original print from Manitou Costruzioni Industriali. The cover lists the first publication date: 04/1995. The content was produced by the manufacturer, not by a third‑party publisher. That means the part numbers, SAGE codes, and quantities are correct for the MVT 660 as it left the factory. Aftermarket catalogs often combine multiple model years into one generic book, which leads to parts that are close but not exact. This one is exact.

Q: Is this the same as a service manual?

No. A parts catalog only lists components and their reference numbers. It does not contain torque specs, repair procedures, or wiring diagrams. You need a separate service manual for tear-down and assembly instructions.

Q: Can I use this to order parts for other Manitou models?

Only the MVT 660. The drawings are specific to this telehandler. If you need a parts catalog for a similar machine, check our related listings: K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages, K-D Manitou K5705, K5797, K5755, K1479, K1787 1991 Parts Catalog, or K-D Manitou K5705, K5797, K5755, K1479 2000 Parts Catalog | OEM Factory Specs.

Stop wasting money on parts that don’t fit. The factory drawings and part numbers are right here. Access the Factory Manual and get the component you need ordered today.