Description

Manitou MT 10055 XT Parts Catalog

If you have ever ordered a part for a Manitou telescopic handler using a cross-reference from an aftermarket site, you already know the pain. The part arrives, it’s the wrong thread pitch or different bracket, and your machine sits. That costs money. This is the Manitou MT 10055 XT Parts Catalog — the actual factory document that the dealer uses. 253 pages of OEM exploded diagrams and part numbers. No guesswork.

Manitou MT 10055 XT Parts Catalog: Why 253 Pages Matter

Every one of those 253 pages is built around a specific component group. The Table of Contents splits the machine into logical sections: Filters (page 6), Cab (starting page 8), Chassis, Hydraulics, Engine, and more. I have been in shops where a tech spent 45 minutes hunting down a hydraulic fitting number because they were using a third-party list. This catalog ends that. You open to the section, find the exploded view, and read the part number straight off the diagram.

Filters and Basic Maintenance Parts

Page 6 covers the filter lineup. Oil filter, fuel filter, hydraulic filter — each with the correct factory part number. You do not need to measure threads or guess micron ratings. The manual lists the exact filter for the MT 10055 XT. Order once, bolt it on, done. That is the difference between factory documentation and a parts website that tries to ‘fit multiple models.’

Cab Components: Standard, Enclosed, and Options

The cab section runs from page 8 through page 42. You get standard cab, enclosed cab windows, wipers, door, instrument panel, fuses, lights, heater, A/C, steering column, seat, pedals, and brake valve. If you need a new windshield seal for the enclosed cab, you flip to the front and rear window section (page 10) and see the exploded view with the rubber part number. No measuring. No calling the dealer and describing.

Engine External Components – Page 60

Page 60 begins the engine external components. This covers the manifolds, alternator, starter, fuel injection pump, and everything bolted to the block. The drawings are factory-accurate. If you need a glow plug or an injector line, the part number is right there. Do yourself a favor — before you pull the old part off, look at the diagram and note the orientation. Saves you a second trip to the dealer.

Understanding how a diesel engine works helps when diagnosing. Read this Wikipedia article on diesel engines for a solid foundation. Then use the catalog to find the exact replacement component. For an even deeper dive, this Wikipedia article on diesel engines covers combustion cycles and common rail systems.

3 Ways This Catalog Prevents Parts Ordering Mistakes

1. Serial number cross-reference. The manual explains how to decode your machine’s serial number (page 3). You match the serial to the correct parts list.

2. Grade and torque data. The inside back cover lists standard attaching hardware torque values. While this is a parts catalog, not a service manual, knowing the torque for a grade 5 bolt keeps you from over-tightening and stripping threads.

3. Exploded views with hardware included. Every assembly shows the nuts, bolts, washers, and clips indented under the main part. You order the complete set, not just the big piece. That stops the frustration of starting a job and missing a retaining clip.

Source Validity: Why Factory Parts Catalog Beats Aftermarket Lists

This is Manitou’s own publication—catalog No. 50960002 Rev. A. Aftermarket parts catalogs often reuse old illustrations or merge model years. That gets you the wrong part. This catalog is specific to the MT 10055 XT. The manual notes that “standard attaching hardware torque values are provided on the inside back cover” and that “all bolts are Grade 5 unless otherwise specified.” You cannot trust a generic website to tell you that.

FAQ – Common Questions About the Manitou MT 10055 XT Parts Catalog

Does this parts catalog include repair procedures or torque specs?

No. This is a parts catalog for ordering replacement parts, not a service manual. It does list standard bolt torque on the inside back cover.

How do I find the correct part number for my MT 10055 XT?

Use the serial number plate located inside the operator’s station or stamped on the top front of the frame. Then match the serial to the correct parts list in the manual. Each section groups components by system—Cab, Engine, Hydraulics, etc.—with exploded diagrams and indented hardware lists. Always cross-reference the part number with your dealer before ordering, especially for model year differences.

Can I use this catalog for a different Manitou model like the MVT 1230L?

No. This manual is specific to the MT 10055 XT. Using it for other models will give incorrect part numbers. Check related manuals below.

What format is the manual in?

PDF format with searchable text. 253 pages of OEM diagrams. Instant access after purchase.

Related Parts Catalogs for Manitou Equipment

• K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages
• K-D Manitou K5705, K5797, K5755, K1479, K1787 1991 Parts Catalog
• K-D Manitou K5705, K5797, K5755, K1479 2000 Parts Catalog | OEM Factory Specs

You do not have time to chase wrong parts. Access the Factory Manual for your Manitou MT 10055 XT and get the correct part numbers the first time. Stop guessing and start fixing.