Description

Manitou MSI30 D, MH25-4 Parts Catalog – 398 Pages of Factory Part Numbers

You’ve got a Manitou MSI30 D or MH25-4 forklift on the lift and you’re stuck tracking down a part number. Maybe it’s a brake master cylinder seal or a hose for the handbrake circuit. Aftermarket cross-reference charts? Worthless. You need the factory Parts Catalog – the same book the dealer uses. This is it: 398 pages of OEM exploded diagrams and genuine part numbers, straight from Manitou North America. No guessing, no mismatched parts, no returns because you ordered the wrong revision.

Why the Manitou MSI30 D, MH25-4 Parts Catalog Belongs on Your Bench

I have torqued more head bolts than most people have had hot meals, and one thing I learned the hard way: if you don’t have the right part number, you’re wasting time and money. Aftermarket catalogs try to bundle everything under one generic number. They don’t account for serial number splits or minor design changes between the MSI30 D and the MH25-4 Turbo Series 2-E3. This catalog covers machines from serial number 254496 and above – a specific production range. That matters when you need a seal for the brake circuit on page 4. The exploded diagram shows exactly which hose, tube, or repair kit fits your unit. You match the reference number, order the part, and move on.

Brake System Parts – What Page 4 Reveals

Page 4 of this catalog breaks down the handbrake and service brake circuits. You’ll see the handbrake assembly (Réf. 6 BA 122) and the repair kit for the hose and fitting connection (Réf. 6 BA 240). The diagram includes tube dimensions – 1.5 mm, 6 mm, 45 mm – so you know exactly what you’re ordering. No aftermarket guesswork. If you’re replacing a brake line, you get the Manitou part, not some universal bend-it-yourself tube. This is the level of detail that keeps a forklift stopping where it’s supposed to. For background on diesel engine fundamentals, refer to this Wikipedia article on diesel engines.

Engine and Drivetrain Components

Because this is a parts catalog, not a service manual, you won’t find torque specs or overhaul procedures here. What you will find is every component in the engine bay broken down into sub-assemblies. The engine section aligns with technical descriptions found in this Wikipedia article on diesel engines, but the part numbers are Manitou-specific. Clutch, flywheel, starter, alternator – each gets its own exploded view with a parts list. Need a thermostat gasket for your MH25-4 Turbo? Look up the engine group, find the reference number, and order it. The catalog uses the same numbering system as the Manitou dealer network.

Does This Catalog Cover the Hydraulics?

Absolutely. The hydraulic system is broken into multiple sections: main control valve, lift cylinder, tilt cylinder, and hoses. Because the MSI30 D and MH25-4 share many hydraulic components, the catalog cross-references them. But pay attention to the “From Machine” serial number column – some parts changed after serial 254496. If you order a hydraulic pump for an earlier machine, it may not fit. The catalog tells you exactly which version you need. If you need a companion repair manual, check the Manitou MSI30 D MH25-4 Parts Catalog | 880 Pages OEM Factory Specs for full service procedures. For different models, the K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages covers those, and older units like the K-D Manitou K5705, K5797, K5755, K1479, K1787 1991 Parts Catalog are also available.

398 Pages – Zero Guesswork in Part Numbers

Every page in this catalog is a factory-issued PDF from Manitou North America. The original file name ends with 23814006113.pdf – that’s the internal document number. No reprints, no third-party scans. The 398 pages include diagrams for the frame, electrical system, steering, and attachments. Each diagram has a parts list with the official part number, quantity, and any supersession notes. If a part has been replaced by a newer number, the catalog tells you. That alone saves you a phone call to the dealer. For general parts research, you can cross-reference the part numbers against your existing inventory list.

Frequently Asked Questions

Can I use this catalog to order parts for my MSI30 D?

Yes, but only if your serial number is 254496 and above.

Does this catalog include torque specs?

No, this is a parts catalog, not a service manual. Torque specs are in the service manual.

How are the parts organized?

The catalog is organized by system groups – engine, transmission, brakes, hydraulics, steering, and electrical. Each section contains multiple exploded diagrams with reference numbers. You locate the part in the diagram, then cross-reference the number to the parts list which includes the official Manitou part number, quantity required, and any notes about supersessions or revisions. Because this is a factory catalog, the part numbers are the same ones the dealer uses. No aftermarket cross-reference guessing. If you need a seal for the brake master cylinder, you find the diagram for the brake circuit, note the reference number, and order that part. The catalog also includes illustrations for hoses, fittings, and repair kits. Pay attention to the revision code – if the catalog says a part is superseded, you need to use the newer number. This is critical to avoid ordering obsolete parts.

What is the difference between this and the repair manual?

The repair manual tells you how to take it apart and put it back together with torque specs. This catalog tells you what part number to order. You need both on the shelf.

Stop burning billable hours chasing wrong parts. Access the Factory Manual now and keep the right number at your fingertips.