Description

Manitou K5705, K5797, K5755, K1479 Parts Catalog – Factory Parts Breakdown

If you’ve ever ordered a replacement cylinder for a Manitou mast and ended up with a part that didn’t line up with the bolt holes, you know the frustration. That’s what happens when you rely on aftermarket part numbers or a dealer who doesn’t have the original catalog. The Manitou K5705, K5797, K5755, K1479 Parts Catalog puts you back in control. This is the same 18-page document that K-D Manitou issued to their dealers for ordering mast components. It’s not a reprint or a scan job from some third party – it’s the original OEM parts catalog.

Every page is laid out with exploded-view illustrations that match the actual rail system, lift cylinders, chain system, and hydraulic components on these masts. Page 1 shows the complete rail assembly with ten numbered callouts. You find your part number by matching the item number on the illustration to the table that lists Part Number, Description, Quantity, and which mast models it fits. The manual even reminds you that you need the mast serial number – because without it, you might order the wrong length rail or a side shift cylinder with the wrong port orientation.

Rail Assemblies: The Backbone of Your Mast

The RAIL ASSEMBLIES section (page 1 of the catalog) covers the outer and inner rails that guide the carriage up and down. These are the parts that take the most abuse – forklift impacts, corrosion, fatigue cracks. If you’re rebuilding a mast from a salvage yard or replacing a bent rail, you need the exact factory dimensions. Aftermarket rail kits often skip the chamfer details or use a different steel grade. The catalog gives you the correct part numbers for the K5705, K5797, K5755, and K1479 masts. For other mast models, see the Manitou Mast Parts Catalog.

Lift Cylinder Assembly: Identifying the Right Parts

LIFT CYLINDER ASSEMBLY starts on page 3. This section breaks down the hydraulic cylinder that lifts the entire mast. You get the piston rod, seals, cylinder tube, and the end caps. If you’ve ever tried to piece together a cylinder seal kit from a generic supplier, you know that one wrong o-ring can turn a 45-minute job into a full day of bleeding air. The catalog lists each seal by its factory part number. You match your mast model – and the serial number – to the illustration. That’s how you avoid grabbing the wrong diameter rod. For a broader list of mast components, check the Manitou Mast Components Parts Catalog.

Does This Catalog Cover Your K5705 or K5797?

Yes – the catalog is specifically written for the Manitou mast models K5705, K5797, K5755, and K1479. But you need to verify the mast model number stamped on the identification plate. The plate is on the right side of the outer rail, at or above eye level from the driver’s seat. If your mast has been modified or rebuilt with non-factory parts, the manual warns that all modifications must be authorized by K-D Manitou. Keep records of any changes. Without the correct serial number, you risk ordering a rail assembly that doesn’t match your carriage mounting. For the K-D Manitou MVT series, refer to the K-D Manitou MVT 1230L/LC Parts Catalog.

7 Systems Covered in 18 Pages

The catalog packs seven major sections into its 18 pages: Rail Assemblies, Lift Cylinder Assembly, Chain System, Hydraulic System, Carriage Assembly, Side Shift Cylinder, and a Decals Appendix plus a Parts Index Appendix. The chain system section on page 5 shows the lift chains, sheaves, and anchor pins. The hydraulic system on page 7 covers the control valve, hoses, and fittings specific to the mast. If you’re replacing a hose that burst under load, you need the factory bend radius and fitting type – not a universal replacement. The side shift cylinder on page 11 is a common failure point; the catalog shows the exact mounting bracket and port configuration for each mast model.

Get the Right Parts: Use the Parts Index Appendix

The last pages of the manual are the Decals Appendix and the Parts Index Appendix. Don’t skip the decal section – safety labels, capacity plates, and operation warnings have specific part numbers. If your capacity plate is worn off, ordering the correct decal is required to keep the machine compliant with OSHA standards. The Parts Index Appendix lists every part number in alphabetical or numerical order. Use it when you know the part number but need to cross-check which illustration it came from. This is faster than flipping back and forth through the sections.

Manitou built these masts to handle heavy loads in tough environments. The only way to keep them running safely is to use the exact factory parts. This catalog gives you that factory data without the fluff. For more on the diesel engines that often power these telehandlers, see this Wikipedia article on diesel engines.

How do I find the correct part number for my mast?

Use the Item Number from the illustration on the page, then cross-reference with the Parts Index Appendix.

What if my mast has been modified after manufacture?

The manual states that modifications must be authorized by K-D Manitou. You need to provide the mast serial number and model number when ordering parts. If unauthorized changes have been made, you may need to contact the dealer. The Parts Index Appendix lists part numbers for standard configurations only. For modified masts, you must identify each component by its illustration number and description. Keep records of all changes to ensure correct ordering – a wrong part can lead to safety issues or machine downtime.

Don’t waste time guessing part numbers or relying on outdated dealer lists. Access the Factory Manual now and get the exact OEM breakdown for your Manitou mast.