Description

Manitou 805069 Parts Catalog

You’re rebuilding a poultry mast and the part number on the hydraulic cylinder is worn off. The dealer wants a serial number you can’t read. That’s why you need the actual Manitou 805069 Parts Catalog – the factory-issued document that tells you exactly which part fits which rail, which hose kit goes left or right, and which rotator cylinder assembly matches your carriage. I’ve seen guys order the wrong 31-inch sleeve and lose half a day waiting for the right one. This 38-page manual fixes that.

Lift Cylinder – Identifying What’s Under the Barrel

Turn to the section for 2.00 LIFT CYLINDER. You’ll see an illustration with item numbers. Each item has a part number, description, quantity, and which mast model it fits. If you need a new barrel or piston, you match the item number from the picture to the table. Page 3 of the catalog tells you to look for the stamped part number on the upper portion of the cylinder barrel. I’ve had guys skip that step and order a whole assembly when they only needed a seal kit. This manual keeps you from burning money on parts you don’t need.

Rail System – Part Numbers Stamped on Top

Section 1.00 RAIL SYSTEM covers the outer and inner rails. The manual points out that each individual rail assembly has its own part number stamped on the top end. If you’re mixing rails from different masts, you need to check that number. The catalog lists the correct rail part for your 805069 series. Don’t trust a generic parts list from some third-party website – they’ll give you a number that’s close but not right. Stick with the factory document.

Hydraulic System and Hose Kits – Left vs Right Side

Sections 4.00 HYDRAULIC SYSTEM, 5.00 HOSE KIT, SINGLE FUNCTION, RH, and 6.00 HOSE KIT, SINGLE FUNCTION, LH break down exactly which hoses and fittings go where. The parts list includes a 31-inch sleeve (part Z4525) and two hose assemblies – one 31 inches long, one 33 inches long. If you install the wrong side hose kit, you’ll have hydraulic lines rubbing against the chain. I’ve seen it cause leaks inside a month. This catalog gives you the OEM lengths and fittings. Use it.

Carriage Types – ITA vs Shaft, and the Rotator

Sections 7.00 CARRIAGE, ITA TYPE and 8.00 CARRIAGE, SHAFT TYPE show two different carriage designs. Then 9.00 ROTATOR and 10.00 CARRIAGE, 48 IN. ROTATOR cover the rotator assembly. If you’ve got a cascade fork positioner (model 804400), the catalog lists it on the parts list at the back. You get the correct part numbers for the rotator cylinder assembly and the hoses. Without this, you’re guessing which rotator seal kit fits. Stop guessing.

Who Actually Uses a Parts Catalog for a Poultry Mast?

Poultry masts are tall, three-stage units used in barns and processing plants. If you work on forklifts for poultry operations, you already know the rails have to be clean and the hoses routed tight. The Manitou 805069 mast is a 3-stage, 5.5K capacity unit. This catalog is for the mechanic who needs to order a new lift cylinder, replace a carriage, or swap a hose kit. It’s also for the fleet manager who wants to keep accurate records of modifications per the manual’s warning on page 3: all modifications must be authorized by Manitou North America. If you skip that step, you void the warranty and create liability.

Source Validity – OEM Document vs Aftermarket Reprint

This is a genuine Parts Catalog from Manitou North America, printed as catalog 806828 revision R06-06. The cover page lists the address in Waco, TX, and the parts department phone number. It’s not a reprint from some online file jockey who scanned it at 150 DPI. It’s the original 38-page factory PDF. When you access it from AutoRepairManuals, you get the exact illustrations and part numbering that Manitou dealers use. Compare that to the garbage you find on forums – half the time the numbers are for a different model year. If you want to order the correct Cylinder assembly, trust the OEM source.

Need more coverage? Check out related manuals: Manitou 805069, 805454, 805154, 805070 Parts Catalog – 24 Pages for a shorter version, or K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages for a different machine. For older models, see K-D Manitou K5705, K5797, K5755, K1479, K1787 1991 Parts Catalog. External reference: if you want to understand the hydraulics behind the mast, read this Wikipedia article on diesel engines.

Does this catalog show torque specs for the cylinder bolts?

No. It’s a parts catalog, not a service manual. You get part numbers, illustrations, and quantities – not torque values or repair procedures.

How do I find the correct serial number for my mast to match parts in this catalog?

Page 3 of the manual explains it: the mast model number is stamped on the identification plate on the right side of the outer rail, at or above eye level. Individual rail assemblies have part numbers stamped on the top end, and cylinder assemblies have them on the upper portion of the barrel. Write those numbers down before you call the dealer. If you don’t, you’ll get the wrong parts and waste everyone’s time. The catalog is only useful when you feed it accurate serial and model numbers. I’ve seen guys order the wrong lift cylinder because they grabbed a number off a sticker that was painted over. Clean the plate first.

Having the factory document on your workbench cuts the guesswork out of parts ordering. No more cross-referencing with worn-out part numbers. No more waiting for the dealer to fax a page. Access the Factory Manual from AutoRepairManuals and keep your poultry mast running.