Description

Mahindra MAX 22 Parts Catalog

If you are trying to order parts for a Mahindra MAX 22 without the factory Parts Catalog, you are throwing money into a parts washer. I’ve seen too many guys grab aftermarket substitution lists and end up with wrong bolts, mismatched seals, and a tractor that leaks hydraulic fluid down the frame. This 135-page Parts Catalog is the only source I trust for genuine part numbers and interchangeability codes. It comes straight from Mahindra USA, not some third-party repack job. You want the right part the first time? You use this book.

What the Parts Catalog Actually Covers

This is not a service manual. Do not confuse it with a repair guide. The Parts Catalog lists every serviceable part for the MAX 22 HST, organized by system. The Index on page 5 shows nine major sections: Engine (S3L-W415RH), Fuel, Electrical, Steering, Power Train, Hydraulic, Chassis, Wheel, and Optional Equipment. Each section breaks down into exploded views and callouts with part numbers, descriptions, and quantities. If you need to order a fuel injector line or a steering cylinder seal, you go to the section, find the number, and cross-check it against the serial number tables.

9 Major Systems Indexed

The index on page 5 gives you a clear starting point. The engine section alone covers the S3L-W415RH diesel with parts for the block, head, injection pump, and cooling. The power train section includes the HST transmission, axles, and differential. Hydraulics covers the pump, control valve, and lift arms. Each section has its own sub-index and numerical part list. You can jump straight to the section, or use the Numerical Index at the back to find a part by its number. I tell my guys: use the index first, then verify the part against the serial number. Skip that step and you order the wrong revision.

Engine Breakdown: S3L-W415RH Specifics

Page 2 of the catalog explains the part numbering system and the symbols used for interchangeability. That is not fluff. That is the key to knowing whether an old part number can be substituted with a new one. The catalog uses codes like A (mutually exchangeable), B (new can replace old but not vice versa), and D (not interchangeable). If you ignore those codes, you end up with a part that does not fit. The engine section is specific to the S3L-W415RH model, which means the piston rings, gaskets, and fuel system parts are matched to that engine serial number range. Do not guess. Use the tables.

Part Numbering and Interchangeability Codes

Mahindra part numbers include letter prefixes like BN (gray), BP (red), and AG (black) to indicate color or finish. The catalog lists standard (STD), oversize (OS), and undersize (US) where applicable. For example, piston rings may come in 0.5 mm oversize. The catalog shows that. The interchangeability codes on page 2 tell you if a superseded part number will work. I have seen DIY guys order a part that was listed as D (not interchangeable) and then wonder why the bolt pattern is off. That is a 20-minute trip to the dealer wasted. Pay attention to those symbols.

Why Genuine Mahindra Parts Matter

Look at page 2 of this catalog: Mahindra states it bears full responsibility for the quality and fit of each part it supplies. Use anything other than a genuine Mahindra part and you void any guarantee. That is not a threat, that is a fact. Aftermarket parts often use cheaper steel or different tolerances. In a compact tractor like the MAX 22, a wrong O-ring in the hydraulic lift can cause slow drift. A mis-sized bearing in the HST can cause premature failure. This catalog lists the exact OEM parts. No substitutions.

Serial Numbers: What to Check Before Ordering

Page 3 of the catalog has a big notice: user must check the type of serial number before ordering. The catalog separates engine serial number, chassis serial number, and ROPS serial number. Parts can change mid-year based on serial number breaks. If you order a cylinder head gasket for a late-model MAX 22 and you have an early chassis, the gasket may not match. The catalog tells you which serial number range each part applies to. That is the difference between a job done right and a return visit.

FAQ

Does this catalog include exploded diagrams?

No.

How do I decode the part numbers and interchangeability codes?

Page 2 explains the symbols and abbreviations used in the catalog. The asterisk marks parts not to be supplied. Letters like A, B, D indicate interchangeability: A means old and new are mutually exchangeable, B means new can substitute for old but not vice versa, D means not interchangeable. You also see color codes like BN for gray, BP for red, AG for black. Each section has its own part number list with these codes. If you are unsure, start with the Numerical Index at the back of the catalog to find the part number, then go to the section diagram to confirm the location and serial number range.

Related manuals you might need: Mahindra MAX Series Operator Manual MAX 22/25 gives operational guidance. If you need parts for other models, check Mahindra MAX 28 Series Parts Catalogue – Section: Numerical Index and Mahindra MAX 25 HST Parts Catalogue. For background on why OEM documentation matters in the automotive world, see Automotive Industry Overview or Automotive Industry Overview.

Stop wasting time on aftermarket guesswork. Access the Factory Manual and get the part numbers that fit your MAX 22 the first time.