Description

John Deere 700J 2007 Parts Catalog

If you’ve ever bolted on a part that doesn’t fit, you know the cost. That mismatch means downtime, return shipping, and a machine sitting idle. I’ve seen guys order the wrong track chain because they used an aftermarket catalog. This John Deere 700J 2007 Parts Catalog is the only reference you should trust. It’s the same binder that sits on the dealer’s parts counter. 423 pages of factory-verified part numbers, exploded diagrams, and serial number breakouts. No guesswork.

8131 Coverage: Track Frames and Underguards

Section 0131 runs from page 1 through 13 in the catalog. That’s where you’ll find track frames, rockguards, and final drive guard kits. The catalog breaks out LGP and XLT track variants separately. If you’re working on a low-ground-pressure machine, you need the specific pages for that undercarriage. This catalog gives you the exact part numbers for rock deflectors and rear rockguards. No mixing up between standard and LGP. Flip to the right page and order the correct steel.

Serial Number Verification – The First Step

Page 4 of this catalog shows you exactly where to find the seven serial numbers on a 700J. Product identification number is on the left frame below the operator station. Engine serial number is on the right side of the cylinder block. Hydrostatic pump and motor numbers are on their housings. This catalog is written for serial number range up to -139435. If your machine is outside that range, you need a different edition. Don’t skip this step. Ordering parts for the wrong serial number breaks the whole job.

Why Use an OEM Parts Catalog Instead of Aftermarket?

Aftermarket catalogs copy the diagrams but miss the revision notes. John Deere updates part numbers regularly. The note on page 3 of this catalog says: “THE PART NUMBERS IN THIS PARTS CATALOG WERE CORRECT AT THE TIME THIS CATALOG WAS PUBLISHED. IT IS OUR POLICY TO CONSTANTLY IMPROVE OUR MACHINES AND, THEREFORE, PART NUMBERS MAY CHANGE.” An aftermarket reprint won’t have that disclaimer. You’ll get a frozen picture that’s already outdated. I’ve had to re-order because a third-party catalog listed a superseded number. This OEM document tells you when a number changed. That’s the difference between a one-day job and a three-day headache.

What’s Inside the 423 Pages?

423 pages of factory data. Sections include 0131 Tracks (track frames, rockguards), 0132 Chains and Sprockets (lubed track, drive sprocket guards), 0133 Rollers and Idlers (carrier rollers, track chain tension adjuster), 0201 Axles (final drives, drain plug guard kits), 0315 Transmission Controls (FNR lever), 0325 Input Drive Shafts (flywheel coupler), and 0355 Variable Speed Drives (tandem pump components, hydrostatic pump charging system). Engine serial number plate decoding is on page 5—it tells you the number of cylinders, displacement, and intake type. If you need to identify a replacement engine part, that plate is your starting point. The catalog also includes micro-computer serial number location. For a complete rebuild, pair this with the John Deere 700J 2012 Technical Manual – 376 Page Factory Specs for torque specs and service procedures.

Who Needs This Catalog?

If you own or maintain a 700J crawler dozer, you need this book. DIY operators who do their own repairs will save hours of cross-referencing. Professional mechanics can hand the part number straight to the dealer without a second call. Real-world example: you pull a worn drive sprocket from section 0132, note the part number, verify it against the serial number, and order. No returns. No waiting. This is the same reference used by John Deere dealers. For other equipment, check the John Deere 2130 Parts Catalog – Factory Specs for Correct Part Identification.

3 Reasons to Choose OEM Documentation

1. Correct part numbers verified at time of publication. 2. Serial number breakouts that prevent ordering the wrong variant. 3. Official John Deere diagrams with all fasteners and hardware listed. Aftermarket catalogs often omit washers or bolts, leading to incomplete orders. This catalog lists every component.
For more background on the engine family used in this machine, read this Wikipedia article on diesel engines.
For further details on diesel engine technology, see this Wikipedia article on diesel engines.

Does this parts catalog include torque specs for assembly?

No. This is a parts catalog, not a service manual. Get the technical manual for torque values.

Can I use this catalog for a 700J with serial number above 139435?

This edition covers crawlers with serial number up to -139435. If your machine has a higher serial number, some parts may differ. John Deere regularly updates part numbers. You need the correct edition for your serial number range. Ordering based on this catalog for a later machine could result in wrong parts. Check your machine’s serial number and compare to the range listed on the cover. The product identification number on the left frame below the operator station is the key.

Stop chasing part numbers that don’t match. Access the Factory Manual and get the correct OEM specifications for your 700J.