Description

Jeep Cherokee 2001 Parts Catalog

If you’ve ever ordered a replacement skid plate for your 2001 Cherokee from a generic parts website only to find the bolt holes don’t line up, you understand why guessing costs time and money. The Jeep Cherokee 2001 Parts Catalog is the factory-issued document that gives you the exact Mopar part numbers for every component—from the transfer case skid plate to the CD changer mounting kit. At 442 pages, it’s the reference I keep on the bench when I need to confirm which Dana 35 axle shaft fits which build date. No aftermarket catalog gets this right.

VIN Plate Decoding: First Step to the Right Part

Page 1 of this catalog gives you the full VIN plate decoding table. Look up position 8 for engine: S for 4.0L gas, M for 2.5L diesel. Position 10 tells you the model year (1 for 2001). Position 5 decodes the vehicle line – F for Cherokee 4×4 LHD, J for 4×4 LHD/RHD, T for 4×2. Without this, you risk ordering parts for a 4×2 on a 4×4 Cherokee. The Automotive Industry Overview on Wikipedia explains the global VIN structure, but this catalog gives you the Jeep-specific codes.

Group 1 – Mopar Accessories: From Roof Racks to Alarm Systems

This section covers all factory accessory parts. Figures 1-110 to 1-130 list CD changer players (6-disc and 12-disc) and the trunk install kit. Carriers & Cargo Hauling (Figs. 1-210 through 1-290) includes bike carriers, canoe carriers, ski carriers, luggage racks, trailer tow kit with wiring harness, and a transmission oil cooler kit. Driving Convenience covers speed control package and cellular phone mounting kit. Exterior Appearance: brush guard, running boards, side steps. Exterior Protection: shield kit, skid plates for front, transfer case, and fuel tank. Fog Lights & Electrical: fog light kit and heater kit. Security: EVS Base and Plus alarm systems. Off-road: rock rails and power winch kit. Page 2 shows the group index.

Front Suspension and Axle Assembly Specs

Get the right axle housing first.

Group 2 splits front suspension into arms (upper and lower), springs and shocks, stabilizer bar and track bar. Front axle drive shafts are shown in Fig. 2-210 with individual part numbers. The housing for 2WD and 4WD are separate—Figs. 2-310 and 2-320. If you need the complete front axle assembly, Fig. 2-410 covers the 4WD unit. Differential parts are in Fig. 2-610.

Rear Axle: Dana 35 vs. Chrysler 8.25

For the rear axle, Group 3 covers the Chrysler Model 8.25 and Dana 35 separately. Fig. 3-110 shows the axle assembly for the 8.25, Fig. 3-120 for the Dana. The differential and housing for each are broken down in Figs. 3-210 to 3-240, including the Trac-Lok option for the Dana. The rear axle vent (Fig. 3-310) and axle shafts (Fig. 3-410 for Dana) are also included. Match your axle code from the VIN to the correct figure. For earlier models, the 1994-1996 Jeep Parts Catalog covers 1994-1996 vehicles.

Brake System Parts: Front and Rear

Groups 4 and 5 cover parking brake and service brakes. Parking brake lever and cables are in Fig. 4-110. Front brakes Fig. 5-110. Rear brakes come in two sizes: 9 inches x 2.5 inches (Fig. 5-210) and 10 inches x 1 3/4 inches (Fig. 5-220). Master cylinder and power brake booster are Fig. 5-310, vacuum booster hose Fig. 5-320. The hydraulic control unit (HCU) is Fig. 5-410. Brake lines are shown with routing for LHD and RHD, with and without anti-lock brakes (Figs. 5-510 to 5-540). The battery is not covered here, but you can reference Automotive Battery for specs on the correct battery group size.

Source Authenticity: Why the Factory Catalog Matters

Aftermarket parts catalogs often use generic illustrations and get part numbers wrong. This is a direct scan of the official Mopar 2001 Cherokee parts book, published by Jeep. Every part number is factory-verified. I’ve seen aftermarket catalogs label a Dana 35 axle shaft as fitting a Chrysler 8.25—that mistake costs you a return shipping fee and a week of downtime. With this catalog, you open the exact figure for your model and read the part number off the diagram. The VIN decoding on page 1 tells you which differential you have, and the corresponding figure lists every part that belongs to that assembly. You avoid second-guessing and wasted phone calls to the dealer asking “does this fit my 2001 Cherokee?” — you already know. That confidence comes from factory data, not a third-party reprint. For related manuals, the Jeep Wrangler Cherokee Grand Cherokee 1991-1993 Parts Catalog covers 1991-1993 vehicles, and the Jeep Cherokee Parts Catalog – Front Suspension focuses specifically on front end components.

Frequently Asked Questions

Does this catalog include part numbers for the 4.0L engine?

Yes. The 4.0L gas engine (code S) and 2.5L diesel (code M) are both listed with their associated parts throughout the groups.

Are torque specifications included?

No. This is a parts catalog, not a service manual. It identifies components by part number only.

Can I use this to order OEM parts from a dealer?

That’s its purpose. Each figure is keyed to a factory part number. For example, Fig. 2-210 shows front axle drive shafts with individual part numbers for left and right, including required nuts, washers, and seals. You take that number to the parts counter and get the correct Mopar part. Over 442 pages of exploded diagrams eliminate guesswork. You order the right skid plate, brake line, or alarm module the first time. Without this catalog, you would waste time cross-referencing aftermarket catalogs that often mismatch. With the factory book, you verify the part number against your VIN and order with certainty.

Does this catalog replace a service manual?

It does not. Use this for parts identification. A service manual provides installation procedures and torque specs.

If you want to stop wasting time with wrong parts and start ordering the exact Mopar piece your Cherokee needs, access the factory manual from AutoRepairManuals today.