Description

Iseki TM223 Parts Catalog – Factory Data for the Tractor That Won’t Quit

If you’ve ever ordered a replacement part for a tractor and ended up with the wrong size because the parts diagram was a blurry photocopy, you know the headache. With the Iseki TM223 Parts Catalog, that stops. This is the actual factory document used by ISEKI dealers—170 pages of OEM part numbers, exploded diagrams, and ordering codes. No aftermarket reprints, no distorted images, no missing figures.

Serial Number Identification and Location

Before you order a single bolt, you need to confirm which TM223 variant you have. The manual tells you exactly where to find the serial numbers. For the engine, the number is stamped on the cylinder block assembly—see Fig. 5-1 on page 3. For the chassis, a label on the tractor frame shows the model and serial. The catalog lists subtypes like FHSME4, FMUE4, FUE1, and FUE4. Pick the wrong variant and the part won’t fit. This catalog eliminates that risk.

Parts Ordering Protocol from the Catalog

Every part number in this catalog is registered in the ISEKI online computer system. When you place an order, the system cross-references the number. If a substitute part exists, the system automatically updates to the new number. That means you get the correct part without back-and-forth calls. But here’s the catch—you must use ISEKI genuine parts. The manual states it flat: any other similar parts may cause a failure that makes ISEKI unable to repair or honor the warranty. Seen that happen? I have. Don’t risk it.

Does This Catalog Include Part Numbers for the TM223?

Yes. Each part shown in the exploded diagrams has a key number, a parts code, a description, quantity, and a model-type column. For example, the suction filter assembly (part 1614-508-200-00) lists which TM223 subtypes use it and what figure to reference. The catalog also marks where standard hardware parts (starting with V or W) apply. This is the same data the factory uses to assemble the tractor. If you need a hydraulic filter, a steering knuckle, or a PTO shaft seal, you look it up here.

Parts List Symbols: What Each Column Means

On page 5 of the catalog, the directions page explains every symbol. QTY shows number per machine—except when it says “M” for meter-length items or “AR” for adjust-or-regulate parts. The columns for type of model use asterisks (standard), “T” (optional), and “R” (replacement applicable). If you’re used to generic catalogs that lump everything together, this level of detail is a relief. You know exactly what fits your TM223 before you click order.

170 Pages of Factory-Correct Diagrams

The bulk of the catalog is figure after figure of exploded assemblies—engine, transmission, hydraulics, steering, electrical, PTO, sheet metal. Figures 1 through 70 cover everything. Page 4 lists the figure index so you can jump directly to the section you need. The diagrams are clean, scanned from original ISEKI printing. No re-tracing, no missing callouts. For a shop that works on multiple TM223s, this catalog pays for itself on the first wrong-part return you avoid.

Source Validity: OEM vs. Aftermarket Documentation

I’ve pulled parts catalogs from third-party printers that swapped part numbers or omitted supersession notes. That’s not what this is. This is an original ISEKI parts catalogue—direct from the manufacturer, published for dealer use. The copyright page (page 3) shows ISEKI & CO., LTD. MADE IN JAPAN. The document structure, the part number formatting, the figure references—all factory standard. If you’re serious about keeping a TM223 running without chasing ghosts, this is the document you need on the bench, not a PDF from a random forum.

For related OEM options, check the Iseki TM223, SF200, SF230, SSM60-F, SSM60-M Parts Catalog – 32 Pages and the Iseki TM223 Parts Catalog – OEM Factory Specs for FHSME4, FMUE4, FUE1, FUE4. Also see the Iseki TS3110 Parts Catalog – Factory OEM Parts Breakdown if you work on that model too.

The agricultural machinery industry relies on accurate part identification to keep downtime short. Automotive Industry Overview and Automotive Industry Overview show how precise documentation reduces errors on the line. The same principle applies to your tractor.

Does this parts catalog cover both two-wheel drive and four-wheel drive versions?

Yes. The catalog includes model codes F (two-wheel) and FH (four-wheel drive). Each figure notes which drive type applies.

How are parts ordered from this catalog?

Locate the part in the figure, note the key number, and find the corresponding part code in the table. Use that part code when ordering from an ISEKI dealer or online parts system. The manual explains the process on page 5.

Can I use aftermarket parts instead of ISEKI genuine parts?

The catalog warns against it. Quoting the original text: “Any other similar parts other than ISEKI parts when used may cause a trouble that makes us unable to repair or guarantee the warrant.” In my experience, non-OEM seals can cause hydraulic leaks, and off-brand bearings may last half the service life. If you need the tractor to run reliably, stick with genuine. This catalog makes it easy to identify the correct ISEKI part number so you don’t guess.

Does the catalog include part numbers for the engine?

Yes. Engine components are covered in figures 5-1 and related diagrams. The cylinder block, pistons, crankshaft, oil pump—all listed with their OEM part codes.

Getting the right part the first time saves you hours of hunting and prevents comebacks. This Iseki TM223 Parts Catalog puts the factory data in your hands. Access the Factory Manual and keep your tractor running on genuine ISEKI specs.