Description

Hitachi Sumitomo SCX550 Technical Manual

If you are running an Hitachi Sumitomo SCX550 Technical Manual on a jobsite and you don’t have the factory specs, you are guessing. Guessing on a 55-ton crawler crane gets people hurt and equipment bent. I have seen guys try to fudge a lift radius with a photocopied load chart from the internet. That is how booms fold. This 28-page OEM document gives you the exact numbers Hitachi Sumitomo stamped into the machine. No aftermarket summaries, no third-party reprints.

Page 3 lays out the basics: maximum rated load 55 t × 3.7 m working radius, boom lengths from 10 to 52 m, winch line pulls, travel speeds, ground contact pressure. The engine is an Isuzu 4HK1X rated at 147 kW at 2100 min⁻¹. That page alone saves you from calling the dealer every time you need to confirm a transport dimension. The manual covers everything from crawler crane dimensions to full-luffing tower crane configurations and clamshell/dragline setups.

You want the rated loads for a 22xa0m tower crane? That is page 14. Page 15 gives you the 25xa0m tower, page 16 the 28xa0m, all the way to page 20 for the 40xa0m tower. Each page includes working ranges so you know exactly what radius you can hit with the jib. The tables are laid out in SI units with conventional units in parentheses – same format you see in the factory cab placard.

Crawler Crane Dimensions and Specifications – Page 3 Data

Page 3 gives the critical dimensions (unit: mm) and specs. Operating weight 52.5 t including the 10xa0m boom and 55xa0t hook. Gradeability 40% (22°). Track ground contact pressure 71.9 kPa (0.73 kgf/cm²). If you are moving this machine across a soft jobsite, those numbers tell you whether you need cribbing. The rear and front main drum line speeds: 110/74/37 m/min depending on load. Boom hoist drum runs at 60 m/min. Slewing speed 3.7 rpm.

These are not suggested numbers. These are the factory calibration values. Use anything else and you risk overloading the winch or overheating the hydraulics.

What Does the Manual Cover? (Crawler, Tower, Clamshell, Dragline)

Four main configurations. The crawler crane section (pages 3–12) includes dimensions, superstructure details (page 4 covers the Isuzu engine specs), working ranges, and crane ratings for main boom and fly jib in 360° working area. The component weights and dimensions for transport are on page 12 – critical for trucking permits.

Full-luffing tower crane section runs pages 13–21, with rated loads for jib lengths from 22xa0m to 40xa0m. Clamshell on page 22, dragline on page 23, each with bucket working ranges. Technical data pages 24–25 list standard and optional equipment. That tells you what came from the factory and what was available as an add-on.

Rated Loads: Factory Table Accuracy

Main boom crane ratings are on page 9. Fly jib ratings span pages 10–11. These tables are the same ones the operator manual references. Trying to lift 55 t at 3.7xa0m radius with a different chart? The machine will tip or the boom will buckle. The SCX550 has a hydraulic system that can produce 15.6 t maximum line pull; the winch itself is rated for 6.5 t. That discrepancy matters when you reef in a heavy load. The factory manual spells it out.

For comparison, the Hitachi Sumitomo SCX550 Technical Manual – 20-Page OEM Specs might be a shorter variant, but this 28-page version gives you the full crane ratings. If you work on other Hitachi excavators, the Hitachi Sumitomo 330LC, 350H, 350LCH, 370MTH, ZX330 Technical Manual covers those models. And for the SH200/220 series, the Hitachi Sumitomo SH200-3 SH220-3 Technical Manual 166 Pages has much deeper service data.

If you need to understand the drivetrain better, a separate Manual Transmission reference might be useful, but the SCX550 uses hydrostatic travel. For general automotive transmission knowledge, Manual Transmission resources are worth a look, though that is not related to this crane manual.

Audience: Who Needs This Manual on the Jobsite

Home garage enthusiasts rarely own a 55-ton crawler crane. But if you are a crane operator, a rigging foreman, a project superintendent, or a mobile crane technician, this manual belongs in your truck. Also useful for rental yard personnel who need to verify capacities before letting a machine go out. Beginners in crane operation will find the load tables and working ranges essential for understanding what the machine can do. The manual assumes you know basic crane terminology, but the data is presented in a clean tabular form – no fluff.

Source Validity: OEM vs Aftermarket Documentation

This is the real deal. The file name ends with 31113003819.pdf, which is Hitachi Sumitomo’s internal part number. The OCR excerpt shows the HSC PAX header and the Asian Issue marking. Aftermarket companies often reprint load charts with missing pages or rounded figures. I have seen one where a 55 t rating got printed as 55.5 t – that extra half ton could put you over the limit. OEM documents avoid that nonsense. The only reason to trust a third-party copy is if you lost the original and cannot get a replacement. But even then, cross-check with the factory data.

Frequently Asked Questions

Is this manual for the SCX550 only?

Yes. Covers only the SCX550 hydraulic crawler crane.

Does it include wiring diagrams?

The manual does not include wiring diagrams or step-by-step repair instructions. It focuses on crane specifications: boom lengths (10 to 52 m), rated loads for main boom and fly jib in 360° working area, superstructure details, and full-luffing tower crane configurations from 22 m to 40 m. Also covers clamshell and dragline dimensions and working ranges. If you need electrical schematics, look for a separate service manual. This is a technical data document used for setup, transport planning, and load verification.

What page are the crane ratings on?

Main boom ratings on page 9, fly jib on pages 10-11.

Is this the OEM Hitachi Sumitomo manual?

Yes. It’s the original factory document from Hitachi Sumitomo, not a reprint or third-party compilation. The file name HitachiSumitomo_SCX550_Technical_Manual_en-31113003819.pdf confirms authenticity.

That is the whole manual: 28 pages of verified data. If you operate or maintain an SCX550, you need this on your tablet or in your binder. Access the Factory Manual from AutoRepairManuals and keep it with the machine documentation.