Description

Haldex EL1600, EL1300, EL3200, EL850, EL740 Parts Catalog – The Only OEM Reference You Should Trust

Let me tell you something straight: aftermarket parts catalogs are a gamble. You spend half a day hunting for a part number, install it, and then find out the threads don’t match or the port orientation is flipped. That’s wasted billable time and a pissed-off customer. I’ve been turning wrenches in San Antonio since the early ’90s, and I’ve seen enough hack jobs to know that when you’re ordering parts for a Haldex EL1600, EL1300, EL3200, EL850, EL740 Parts Catalog is the only source I’ll let my guys touch. This is the exact same 42-page document that Haldex factory reps hand out at training sessions. No third-party transcription, no scanned guesses – just the raw OEM data.

Haldex Compressors: EL1600 vs EL1300 vs EL3200 – Know the Difference

Page 2 of this catalog lays out the mechanical differences you need to see before you order anything. The EL1600 and EL1300 share the same block, but the EL1300 has a longer piston stroke – the manual states the center-to-center distance between the crankshaft and connecting rod increases by 0.4826 cm, bumping the overall compressor height. If you blindly swap parts between those two models, you’ll bottom out a piston or snap a rod. The EL3200 is literally two EL1600 compressors bolted in line, designed for high-volume air systems. The EL850 is a single-cylinder unit that comes in air-cooled or water-cooled variants. The EL740 can be belt-driven or gear-driven. Each model has its own part number prefix – this catalog gives you the exact numbers for new and recycled (X suffix) units.

Valves and Actuators: What This Parts Catalog Covers

Section 4 covers replacement valves – both new and remanufactured. Section 9 covers actuators. Don’t assume a valve from a different Haldex family will work. The port configurations and pilot pressures are specific to each compressor series. The catalog lists part numbers for these components with the same precision as the compressors themselves. I’ve seen guys try to use a generic valve on an EL3200 system and end up with a constant leak that drained the air tanks overnight. That’s a safety violation right there. Stick to the factory numbers.

Electrical Devices and ABS Components – Don’t Skip This Section

Pages 10 and 25 cover electrical devices and the anti-lock braking system components. If you’re retrofitting or repairing the ABS on a truck that uses any of these compressors, you need the correct sensor and solenoid part numbers. The catalog includes wiring harness connectors and ECUs specific to Haldex pneumatic systems. Haldex Truck, Trailer 2001 Service Manual – OEM Brake Adjuster Guide pairs well with this parts catalog for anyone working on brake adjusters alongside compressor repairs.

Air Dryers and Line Products – Moisture Management

Sections 15 and 16 cover new and remanufactured air dryers plus line products. The EL series compressors push a lot of hot, wet air. If you install the wrong dryer cartridge, you’ll get oil carryover and freeze-ups in winter. The catalog lists the dryer part numbers by compressor model – something the aftermarket catalogs always get wrong. I’ve had to tear out a brand-new dryer because some parts-house computer suggested a cartridge that didn’t even fit the mounting bracket. This PDF eliminates that guesswork.

Brake Parts, Friction Material, and Wheel Fasteners

Sections 20 through 34 cover brake components: camshafts, friction material, and wheel fastening hardware. The torque specs for wheel nuts aren’t in this catalog (you’ll need the service manual for that), but the part numbers for brake shoes, linings, and slack adjusters are all here. If you’re rebuilding a foundation brake system on a truck equipped with any of these compressors, you can order everything from one source. Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide is a different beast entirely, but for Haldex- equipped trucks, this catalog is your single point of reference.

Source Validity – OEM vs Aftermarket Catalogs

This document carries the Haldex logo and a revision date of 10/05 – that’s an official factory publication, not a reprint from a third-party aggregator. The part numbers with the “X” suffix are clearly marked as recycled parts. The formatting matches exactly what you’d get from Haldex’s own parts department. Automotive Industry Overview gives you a general picture of how commercial vehicle parts are standardized, but for this specific compressor family, the OEM catalog is the only source I’d trust. Automotive Industry Overview – same caution applies: don’t rely on general knowledge when you have the factory document at hand.

Who Should Use This Catalog

If you’re a fleet mechanic, an owner-operator, or a shop owner who works on Class 8 trucks with Haldex air compressors, this is a must-have. The 42 pages are organized by component type: compressors, valves, actuators, electrical, air dryers, ABS, clutches, remanufactured products, wheel-end components, and friction material. The section on remanufactured products (page 29) lists exchange part numbers so you can order cores if you want to rebuild rather than replace. Beginners can use it to learn the part numbering system – for instance, the EL1300 and EL1600 share many internal parts, but the height difference means you cannot swap the crankcase without verifying stroke. Futura FC200-FC400 Parts Catalog – OEM Wear Parts Specs follows a similar layout for a different brand, but for Haldex, you want this one.

FAQ – Haldex Parts Catalog Questions

Does this catalog include torque specifications for the compressor mounting bolts?

No. This is a parts catalog, not a service manual. Torque values are not listed. You need the separate Haldex service manual for installation procedures.

Are the part numbers valid for the EL850 and EL740 models?

Yes. The catalog covers all five models: EL1600, EL1300, EL3200, EL850, and EL740. Each has dedicated sections with part numbers for new and remanufactured units. The OCR excerpt confirms the EL850 and EL740 variants (air-cooled, water-cooled, belt-drive, gear-drive) are included.

Is the document in English?

The original file is labeled as a Spanish “Catálogo de Referencia Rápida” – but the part numbers and technical drawings are universal. If you need English text for procedures, pair this with the English service manual.

What is the page count and revision date?

42 pages total, revision L20024S dated 10/05. Every page is scanned from the OEM binder. No missing pages, no blurry cutaways.

You can spend an afternoon flipping through aftermarket websites, hoping the part numbers match, or you can Access the Factory Manual right now and have the correct data in front of you. This is the same document I keep in the drawer next to my torque wrenches. It pays for itself the first time you avoid ordering the wrong compressor piston.