Description

Genie S-60, S-65, S-60X, S-60XC, S-60HC 2017 Parts Catalog

If you are pulling parts for a Genie S-60 lift and the serial number sticker is worn off, you are probably standing there guessing. Guessing costs time and money. This 2017 Parts Catalog from Genie is the factory document for the S-60, S-65, S-60X, S-60XC, and S-60HC models. It runs 344 pages. Every exploded view and part number comes from Genie directly, not some third-party rewrite. You get the same information the dealer uses.

Parts Breakdown for the Genie S-60, S-65, S-60X, S-60XC, S-60HC

The catalog organizes parts by system. You get exploded diagrams for every assembly on these machines. For example, the decals section starts at figure 101.1 (page number in the electronic version). Each figure lists part numbers, descriptions, and quantities. Need a hydraulic tank decal for a S-60 built in 2010? You look up the serial number range and find the correct figure. Genie also includes part numbers for the S-60TraX and S-65TraX variants in this revision. Page 3 shows the machine unladen weight: 20,736 lbs. That kind of spec matters when ordering tires or lift cylinders.

What Does the Decals Section Cover?

Decals are not just stickers. They carry safety warnings and operational instructions. This catalog includes the exact decal placement and part numbers for each model variant. Page 4 notes that Genie updates the manual online, so you can access new decal figures if your printed copy is old. The decals section alone covers Australian compliance decals (figure 101.1) and standard US-market decals. If you need a worded decal for the hydraulic tank side, that figure is in there. Genie part numbers are printed right on the diagram – no guessing which decal goes where.

344 Pages of Factory Parts Information

You get everything from chassis components to platform controls. The table of contents uses live links in the PDF. Click on any page number to jump to the figure. That is how you navigate 344 pages without losing your place. Genie published this in July 2017, revision B15, part number 147769. The serial number range covered goes from SN S6010-21001 to S6013-26295. If your machine falls outside that range, you need a newer catalog. Check the Genie S-60 S-65 Series 2012 Parts Catalog for earlier models. For a full factory service manual, look at the Genie S-60 S-65 2012 Parts Catalog – OEM Factory Manual (note that is also a parts catalog – verify your needs).

Verify Your Serial Number Before Ordering

The serial number is stamped on the chassis and on a label under the cover. Page 3 of the manual shows how to read it. For example, S6010-21001 means model S-60, model year 2010, sequence number 21001. Ordering a part for the wrong serial number range gets you a box that does not fit. This catalog covers S-60, S-65, S-60X, S-60XC, and S-60HC models. The S-60TraX and S-65TraX are also included in this revision. If you also need the operator’s manual, look at the Genie S-60 S-65 Operators Manual. That document covers daily operation and safety – different job than parts identification.

Genie S-60, S-65, S-60X, S-60XC, S-60HC 2017 Parts Catalog: Key Features

This is not a repair manual. There are no torque specs, no fluid capacities, no service procedures. It is a parts catalog. You use it to identify and order the correct replacement parts. The electronic version includes clickable TOC links. Each figure is a separate page. You can print the figure you need and take it to the parts counter. Genie recommends using their online Parts Lookup System for the most current data, but having this PDF on your tablet saves network calls in the shop. These machines comply with ANSI A92.5 and CAN B.354.4, standards developed within the Automotive Industry Overview. Understanding how parts catalogs fit into the broader Automotive Industry Overview helps you appreciate why OEM documentation matters.

Can I use this catalog for serial numbers outside the listed range S6010-21001 to S6013-26295?

This catalog covers serial numbers S6010-21001 through S6013-26295 only. Machines outside that range require a different revision.

How do I navigate the electronic version of this parts catalog?

The PDF uses a clickable table of contents. Each figure listing in the TOC is a live link. Open the TOC, move your cursor over the desired parts figure, and left click to view that figure directly. That saves time compared to flipping through 344 pages. Page 4 of the manual tells you to access new figures from Genie’s website if you have a printed manual. For the most current parts data, Genie recommends using their online Parts Lookup System at www.genielift.com. The electronic version also lets you print individual figures – take them to the parts counter without carrying the whole book.

Click the button to access the factory manual for your Genie S-60 series lift. This PDF is the real deal – 344 pages of Genie part numbers and exploded views. No condensed aftermarket version. Buy the OEM catalog and keep your lifts running.