Description

Genie S-60 2015 Parts Catalog

I’ve seen too many guys waste a shift because they ordered the wrong hydraulic fitting or grabbed a belt from a generic box. That’s how you turn a thirty-minute job into a tow bill. If you’re working on a Genie S-60 boom lift, you don’t need guesswork. You need the factory parts catalog – the 2015 edition, 128 pages, from Genie themselves. This isn’t a reprint or a scan of a scan; it’s the original PDF with all the figure links active. Click a diagram, jump to the part number. That’s how it should work.

Serial Number Range: Identifying Your S-60

Every Genie S-60 has a unique serial number stamped on the chassis. This manual covers serial numbers 001 through 652. If your machine falls outside that range, you need a different book – for example, the Genie S-60 S-65 Series 2017 Parts Catalog or the Genie S-60 S-65 Series 2012 Parts Catalog for earlier builds. Using the wrong range means ordering parts that look right but don’t bolt up. Page 1 lists the exact serial number coverage so you can confirm before you buy. Don’t skip that step.

How to Read Your Serial Number

On page 3 of the catalog, there’s a clear diagram showing where the serial label is located (under the cover on the chassis) and how to decode it. The format is something like S8006-12345 – the last five digits tell you the sequence number. That sequence is what you match against the range in the manual. I’ve had guys call me because they ordered a part for ‘their S-60’ without checking the serial number, and it didn’t fit. Then they blame the manual. That’s on them, not the book.

Parts Stocking List: What Every Shop Should Keep

Any mechanic who’s worked on a Genie lift knows the common failure points – drive motors, cylinder seals, control boards. The Parts Stocking List (page 7 of the catalog) recommends which components to have on hand for typical repairs. It’s not a wish list; it’s based on field data. If you run a rental fleet or a service truck, follow that list. The Genie S-60 S-65 2012 Parts Catalog has a similar list, but the 2015 version updates part numbers for newer revisions. Keep both if you mix model years.

Genie S-60 2015 Parts Catalog: Diagrams and Part Numbers

This is the meat of the manual. Each figure is a detailed exploded view with callouts. Click on a figure link in the table of contents (TOC) and it jumps straight to that page. No scrolling through blurry scans. The part numbers are OEM – not a cross-reference from some aftermarket database. I’ve seen third-party catalogs list ‘equivalent’ parts that have different thread pitches or seal profiles. That’s how you get leaks. Stick with factory numbers from this book.

Why OEM Over Aftermarket?

Aftermarket parts catalogs often cut corners. They might omit the hardware kit needed for a cylinder rebuild, or list a generic seal that’s close but not correct. On a machine like the Genie S-60, a seal failure at height is a safety issue, not just a downtime issue. The OEM catalog includes every nut, washer, and o-ring. Page 4 shows the Service Parts Fax Order Form – you can fax or submit that directly to Genie. They’ll ship the exact parts. No guesswork. The Automotive Industry Overview standards for documentation are high, and Genie follows them.

Technical Publications Contact Information

If you find an error or need a clarification, Genie’s technical publications team is reachable at awp.techpub@terex.com or via their website. They update the digital figures regularly – if you have a printed copy, you can access new figures from www.genielift.com. The manual itself is dated January 2015 (Rev B20), but the content is still current for the serial number range. For broader context on how construction equipment documentation compares to automotive, see the Automotive Industry Overview.

How to Order Parts Correctly

The catalog includes a full Service Parts Fax Order Form on page 9. Fill out the model, serial number, part number, quantity, and your shipping info. Fax it to the number listed. That’s the procedure. Don’t call and expect a counter guy to decode your VIN – this isn’t a passenger car. Use the form, include the figure reference if possible. It speeds up the order and reduces mistakes.

Does this catalog include torque specs or repair procedures?

No. This is a parts catalog, not a service manual. It lists part numbers and diagrams only.

How do I ensure I order the correct part if my machine has been modified?

If the lift has had field modifications or retrofits, the serial number alone may not be enough. Compare the part you’re replacing against the diagram in the catalog. Measure dimensions if possible. Genie’s technical support can also help if you provide the serial number and a photo of the part. Many aftermarket modifications use non-standard hardware, so the OEM catalog might not list the replacement. In that case, you’ll need to reverse-engineer the part or contact Genie for a supersession. The catalog’s exploded views are your best reference – they show the original assembly exactly. Do not assume a newer serial number manual will cover your machine if it’s been updated. Always check the serial number range on page 1 first.

Stop wasting time with mismatched parts and safety risks. Access the Factory Manual now and get the genuine part numbers straight from Genie.

• Genie S-60 S-65 Series 2017 Parts Catalog
• Genie S-60 S-65 Series 2012 Parts Catalog
• Genie S-60 S-65 2012 Parts Catalog