Description

Genie GS-2668 DC, GS-3268 DC 2012 Parts Catalog

If you have ever tried to match a part number from a blurry aftermarket diagram only to get the wrong seal kit or drive motor, you know the feeling. That wasted trip to the dealer, the return shipping, the downtime. This is why I only trust factory documentation when I am ordering components for a boom lift or scissor lift. The Genie GS-2668 DC, GS-3268 DC 2012 Parts Catalog is the real deal – 114 pages of OEM part numbers, exploded views, and ordering instructions that match what Genie shipped from Redmond, WA. You do not guess with this catalog. You look up the figure, confirm the serial number range, and order exactly what the machine needs.

Parts Breakdown for Drive Chassis Components

Section 200 of this catalog covers the drive chassis – the steer axle linkage, wheels, and drive motors on the GS-2668 DC and GS-3268 DC. You get separate figures for the steer and non-steer axles. Each figure includes a parts list with Genie part numbers, quantities, and sometimes even torque callouts in the notes. If you are replacing a wheel hub or a drive motor, flip to figure 201.1 on the electronic version. The exploded view tells you exactly how everything stacks. No aftermarket redraws that omit the washers or use a generic bolt length. You see the factory assembly order.

What Serial Numbers Does This Manual Cover?

Page 3 of the catalog shows how to read your serial number. The GS-2668 DC and GS-3268 DC are covered up to serial number GS68-41317. Machines built after that use a different revision – so if your serial plate reads GS68-41318 or higher, this manual is not for your lift. The serial number is stamped on the chassis frame under the cover. Check it before you order anything. I have seen guys order steer axles for the wrong series and end up with a $1,200 ornament.

114 Pages of Factory-Sourced Part Numbers

Every page in this Parts Catalog comes from Genie’s own technical publications department, revision D12 dated April 2012. You get the full Parts Stocking List on page 7, a How to Order Parts section on page 8, and a Service Parts Fax Order Form on page 9. The remaining pages are broken into major sections: Decals and Paint (section 100), Drive Chassis Components (section 200), and additional chassis breakdowns. Each section uses live-linked figures in the PDF – click the page number and the exploded view jumps up. You do not flip through 100 pages looking for a bushing.

Decals and Paint: Factory Placement Diagrams

Section 100 covers decals and paint. If you are restoring a GS-2668 DC or replacing a worn caution label, this section shows exactly where each decal goes and what part number to order. Genie has specific placement for the ANSI compliance label, the load rating placard, and the serial number label. Slap one in the wrong spot and an inspector might flag it. The parts list includes the decal part numbers so you can call your dealer with confidence.

Verify Your Serial Number Before Ordering

Before you click “add to cart” on any part, get the serial number off your GS-3268 DC. The manual explains the sequence number format: GS68-XXXXX. You need that sequence number to cross-reference the parts figures. Genie updates figures when they change suppliers or revise a casting – the serial number tells you which revision applies. Page 3 shows the serial label location (under the cover) and gives you the machine unladen weight, rated work load, and gradeability data. That data tells you if your lift has the original configuration. If the weight does not match, someone swapped components.

How to Order Parts Using This Catalog

Page 8 details the ordering procedure. You fill out the Service Parts Fax Order Form (page 9) with the model, serial number, figure number, item number, part number, quantity, and your dealer information. Keep a copy of the form for your records. For the most up-to-date parts information, Genie recommends visiting their Parts Lookup System at www.genielift.com – but the printed PDF is your go-to reference when the internet is down or you need to work off a tablet in the dirt. I always keep a copy on my shop tablet and a backup on my phone. You never know when a customer drops off a GS-2668 DC at 4:30 PM on a Friday. Related manuals in the same series include the Genie S-60, S-65 2012 Parts Catalog – Factory OEM Manual for boom lifts, the Genie S-80, S-85 2012 Parts Catalog – OEM Factory Parts Manual, and the Genie S-80, S-85 2012 Parts Catalog – OEM Factory Specs. For background on the automotive and heavy equipment industry, refer to the Automotive Industry Overview and the Automotive Industry Overview.

What serial numbers are covered by this Genie GS-2668 DC, GS-3268 DC 2012 Parts Catalog?

Covers GS-2668 DC and GS-3268 DC up to serial number GS68-41317.

How is this Parts Catalog organized for finding parts?

The catalog is split into figure-based sections. Section 100 covers decals and paint, section 200 covers drive chassis components including steer and non-steer axles. Each figure has an exploded view with a corresponding parts list showing the Genie part number, description, quantity, and sometimes notes for torque or special instructions. The first few pages include a Parts Stocking List and an order form. The PDF uses live bookmarks so you click the figure number and jump directly to that page. You can also search by part number if you have the digital version.

If you work on these machines more than once a year, do not rely on a third-party copy. Get the real Genie documentation. Access the Factory Manual now from AutoRepairManuals and keep your GS-2668 DC or GS-3268 DC running with the right parts the first time.