Description

Ford Ford-Ferguson Tractor 1946 Parts Catalog – Factory Original

I’ve been turning wrenches for 28 years, and nothing burns my time like a wrong part number. You order a seal for a ’46 Ford-Ferguson Tractor, the aftermarket catalog says it fits, then you find out the groove is 0.010″ off. That’s when you start looking for the real thing. This Ford Ford-Ferguson Tractor 1946 Parts Catalog is the original factory document—94 pages of exploded diagrams and Ford part numbers that match what came off the line. No reprint guessing games.

Brakes: The Section You Will Need First

Group 13 in this catalog covers the brakes—and if you’ve ever tried to bleed a 1940s tractor brake system with generic parts, you know the pain. The diagram shows every spring, shoe, and anchor pin with the original Ford part numbers. The catalog groups brakes separately from the pedals (Group 14), so you can order exactly what you need without cross-referencing aftermarket books that list three different numbers for the same shoe. This is factory correct for the Ford-Ferguson Tractor.

What Does the 1946 Parts Catalog Actually Cover?

It’s a parts catalog, not a service manual—but if you’re restoring a 2N, 9N, or Ford-Ferguson, this is the map. The table of contents lists 52 groups, starting with the driver’s seat (Group 1) and running through the hydraulic lift, PTO, wheels (rubber and steel), differential, steering, transmission, clutch, engine cylinder blocks (with and without valves), left and right side engine assemblies, generator, water pump, carburetor, distributor, governor, starter, wiring, oil filter, hood panels, front axle, muffler, and even the kerosene vaporizer and magneto conversion parts. The Numerical Parts Index at the front lists every part number from 9N-400-A to the last standard bolt, with group and page references. 94 pages of genuine data.

Engine and Drivetrain Breakdowns – Groups 22 to 26

The engine section is where most restorers live. Group 22 covers the final engine assembly, Group 23 shows the cylinder block with sleeves and bearing caps, Group 24 gives the block assembly with pistons, rods, cam and crank shafts. Groups 25 and 26 are the left and right side engine assemblies—critical if you’re hunting for that specific water inlet elbow or side cover gasket. The part numbers are the ones stamped on your original castings. The aftermarket catalogs I’ve seen skip half this detail. If you want to match your Ford-Ferguson Tractor’s drivetrain, this is the only source.

Use the Numerical Parts Index to Find Any Part

Start at page 2 of the catalog—the Numerical Parts Index. Every part number from the book is listed alphabetically by number with its group and page. Need a 9N-504 fork? Look it up, see it’s in Group 3 (Lift Shaft and Related Parts), page 13. The index also includes a supplement section (page 77) for later revisions. Don’t waste time flipping through all 94 pages blind. Use the index, order the right piece once.

Why OEM Documentation Beats Aftermarket Reprints

I’ve seen aftermarket “reprints” that blur the drawings and swap part numbers. This catalog is a direct scan of the original January 1946 printing by Harry Ferguson, Inc., Detroit. The copyright page (page 2) shows the original part numbers and quantities. The diagrams are clean enough to read the dashes on the brake shoe springs. If you’re spending money on a Ford-Ferguson Tractor restoration, you don’t gamble on parts. You use the factory source. Period.

Related Manuals You Might Need

• Ford Wheel Loader 1975 Parts Catalog – OEM Factory Manual
• Ford PA-4020-F 1979 Parts Catalog – OEM Wheel & Weight Specs
• Ford SUPER DEXTA & Fordson Dexta 1977 Parts Catalog – OEM Factory Manual

For broader automotive tech context, see Automotive Industry Overview and Automotive Battery for related electrical specs.

FAQ

Does this manual include torque specifications?

No. This is a parts catalog, not a service manual. It lists part numbers and exploded views only. You will need a separate service manual for torque values.

How do I use the Numerical Parts Index?

Open the catalog to page 2-4. Find the part number you need (e.g., 9N-588). The index lists its group number and page. Turn to that group (Group 5, page 17) to see the diagram and the exact Ford part number for ordering. The index also covers supplement part numbers starting on page 77. If the part isn’t in the main index, check the supplement. The Standard Parts Index on page 90 gives generic hardware like bolts and nuts with Ford part numbers. This system saves hours of flipping—use it.

Can I use this catalog for a 2N tractor?

Yes. The index and groups are labeled for 2N tractors. The original front cover section says “2N TRACTOR PARTS LIST AND SUPPLEMENT.” All part numbers and diagrams are specific to the Ford-Ferguson 2N and 9N series. If you have an 8N, some parts overlap, but this catalog is built for the 1940s Ford-Ferguson models.

Is this a physical book or a digital access?

Digital PDF format. 94 pages, immediate access. No shipping, no waiting.

Get the part numbers right the first time. Access the Factory Manual now and keep this 1946 Ford-Ferguson Tractor Parts Catalog on your tablet or shop computer. It’s the only number reference you can trust.