Description

Fiatallis 600 Parts Catalog – OEM Factory Specs for Ordering the Right Parts

If you’ve ever bolted up a part that didn’t fit because the number was off by one digit, you know the cost. This Fiatallis 600 Parts Catalog is the original factory document – the same one Fiat shipped to dealers in 1971. It contains 356 pages of exploded-view plates, part numbers, and ordering codes for the entire machine. No aftermarket reindexing, no third-party abbreviations – just the Italian-English-French-German-Spanish text Fiat used. You need this if you want to order a bearing, a cable, or a terminal boot and have it show up correct.

Ordering Parts the Right Way: Page 5

Page 5 of the catalog spells out the ordering norms – how to structure a parts request so Fiat’s system doesn’t kick it back. You get the rules in five languages: shipment codes, minimum order quantities, and how to reference the subgroup index. Skip this page and you’ll waste time chasing parts that don’t match your machine’s serial number range. Read it once and save yourself the headache.

Use of the Catalog: How to Navigate 356 Pages

Page 9 gives you the procedure to find any part. Start with the model list on orange paper (page 11) to identify your specific chassis variant. Then jump to the subgroup index (page 17/1) – that’s where systems like engine, transmission, and hydraulics are broken into subgroups. Each subgroup links directly to a plate (a line drawing) and the parts list above it. The numerical index (page 19/1) lets you search by the old part number if you have one. This is a professional indexing system, not a generic table of contents.

Spare Parts Plates: Visual Identification

The plates section is the heart of this catalog. For each subgroup, you get a detailed line drawing with numbered callouts. The parts list sits directly above the plate, so you can match the number on the drawing to the part number, description, and quantity. No flipping back and forth. The drawings are clear enough to identify a specific bolt, bushing, or hydraulic fitting. If you’re rebuilding a 600 transmission or final drive, these plates are your roadmap.

Modifications Tables: What Changed and When

Fiat released engineering changes throughout production, and they’re documented in the modifications section starting on page 1M. Each table shows the old part number, the new part number, the serial number cutoff, and the nature of the change – material upgrade, dimension tweak, or supersession. You cannot order a correct replacement part without checking these tables. I’ve seen techs order a seal that fits only pre‑1970 machines because they skipped this section.

Miscellanea Tables: Bearings, Cables, Terminals, Insulation

After the main parts section, the catalog includes dedicated tables for commonly replaced wear items. Bearings (page 1T) list every ball, roller, and needle bearing in the 600 with cross‑reference dimensions. Electrical cables (page 3T) give you the exact length, gauge, and terminal type for the wiring harness. Cable terminals and boots (page 4T) show the correct crimp‑on lug and protective cap. Insulation tubes (page 5T) specify the heat‑shrink or spiral‑wrap tubing. These tables alone can save you an hour of measuring and guessing.

Why OEM Factory Documentation Matters

Aftermarket parts catalogs often re‑draw plates and simplify part numbers. Small changes creep in – a bolt length gets rounded, a bushing material gets changed, a seal cross‑section gets mis‑copied. This Fiatallis 600 Parts Catalog is a direct scan of the original FIAT publication. The part numbers are the ones factory engineers wrote. The diagrams are at factory scale. If you order from this catalog, you get the right piece. For related OEM documents, check the FIAT 600 Parts Catalog or the Fiatallis HD-9 1989 Parts Catalog – OEM Factory Specs and the Fiatallis HD-6A, HD-6AG, HD-6B, HD-6E 1989 Parts Catalog. For broader context on why OEM docs matter, see this Automotive Industry Overview and this Automotive Industry Overview.

Frequently Asked Questions

Does this catalog include part numbers for the engine?

Yes, the subgroup index (page 17/1) lists the engine as a main group, with sub-sections for cylinder head, block, injection pump, and cooling system. Each sub-section has a plate and a parts list.

What about electrical components?

The catalog covers the entire electrical system. The wiring harness is shown on the plates, and the separate miscellanea tables (page 3T–5T) provide exact cable lengths, terminal types, and insulation specs. You can order a replacement cable by length, gauge, and terminal code without ever touching the harness.

Stop burning time and money on wrong parts. Access the Factory Manual and get the same pages Fiat technicians used. Your 600 will thank you.