Fiatallis 545, 545H 1989 Parts Catalog – OEM Parts Manual
Original price was: $47.25.$35.00Current price is: $35.00.
OEM Fiatallis 545, 545H Parts Catalog (1989) – 423 pages of factory exploded views and part numbers for wheel loaders.
Description
Look, I’ve been turning wrenches for 28 years. I’ve seen guys order three different water pumps for a 545 because they used a generic parts list. This Fiatallis 545, 545H 1989 Parts Catalog is factory OEM – 423 pages of exact part numbers and exploded views. You need a part for a 545H? You find it here.
The first thing you see in this catalog is a safety warning on page 2. It tells you to never clean or adjust a machine while it’s in motion. That’s not a suggestion – it’s how people lose fingers. Every page after that is pure, uncluttered factory data.

Fiatallis 545, 545H 1989 Parts Catalog – What’s Inside?
Your manual covers the complete wheel loader – diesel engine, transmission, hydraulic system, front and rear axles, steering, brakes, and the bucket linkage. Every subsystem has its own section with numbered diagrams. Each part gets a reference number tied to a table of part numbers, descriptions, and quantity used. This is not a generic list – it’s the same book Fiatallis dealers used.
Why an OEM Parts Catalog Beats Aftermarket Copies
Aftermarket catalogs often re-draw diagrams and re-number parts. That gets you the wrong bushing for a pin joint, and then the machine sits. The OEM catalog uses Fiatallis engineering drawings. The part numbers on page 73 match the numbers stamped on the actual castings. I’ve seen too many jobs get delayed by third-party mistakes. This catalog eliminates that.
423 Pages – Every Part Number You Need
423 pages of data. Each page is a clean reproduction of the factory print. You get exploded views that show how a hydraulic valve stack comes apart – not just a photo of the outside. The index at the back lets you cross-reference part numbers across models. If you need a seal for the 545H, you find the correct size without ordering extra inventory.
Safety Warnings You Must Read First
The manual starts with a warning: “Never attempt to clean, oil or adjust a machine while it is in motion.” And it says to lower equipment to the ground before servicing. If you have to raise hydraulically controlled equipment, support it with stands – not just the cylinder. These warnings are printed in the factory manual because they have seen the results. Read them.
Who Needs This Parts Catalog?
You are a shop owner, a mechanic, or an owner-operator running a 545 or 545H wheel loader. You need to order a cylinder rebuild kit, a brake disc, or a water pump. Without the OEM numbers, you waste time and money. This catalog also helps if you are restoring a machine – the exploded views show how the original parts fit together, so you catch missing spacers or incorrect bolts.
How to Order the Correct Part the First Time
First, find the section for the system you’re working on – driveline, hydraulics, etc. Then locate the exploded-view diagram. Note the item number on the drawing. Cross-reference that number in the parts list to get the official Fiatallis part number. Write that number down – no guessing. Then order from your dealer. That process is the same as what I do in my shop every week.
- Does this catalog cover the 545H model?
- Yes, the same manual covers both 545 and 545H. The pages include specific callouts for the 545H where parts differ.
- Is this a reprint or a scanned PDF?
- It is a high-quality digital scan of the original factory print. No OCR errors in the part numbers – they are readable and accurate.
- Can I use this manual to rebuild a transmission?
- This is a parts catalog, not a service manual. It shows you which parts go where (exploded views) but does not contain torque specs or assembly procedures. It is meant to be used alongside the service manual for ordering correct replacement parts.
- How are the pages organized?
- Sequentially by major system groups. Each system starts with an illustration index. Over 400 pages total, with the last section containing an alphabetical part index.
Access the factory manual. When you buy from AutoRepairManuals, you get the same 423-page PDF that Fiatallis originally printed. No crop, no watermark, no missing page 16. Use it on your tablet or print the pages you need. Related manuals: Fiatallis HD-9 1989 Parts Catalog – OEM Factory Specs and Fiatallis HD-6A, HD-6AG, HD-6B, HD-6E 1989 Parts Catalog and Fiatallis HD-21 1990 Parts Catalog – Crawler Tractor Parts Manual. For background on the original manufacturer, see Automotive Industry Overview and Automotive Industry Overview.
Additional information
| Brand | Fiatallis |
|---|---|
| Language | English |
3 reviews for Fiatallis 545, 545H 1989 Parts Catalog – OEM Parts Manual
You may also like…
-
Sale!

Fiatallis FD9 1990 Service Manual – OEM Factory Specifications
Original price was: $59.85.$45.00Current price is: $45.00. -
Sale!

Fiatallis FL5 FL5B FD5 Service Manual – OEM Specs
Original price was: $58.50.$45.00Current price is: $45.00. -
Sale!

Fiatallis FW110, FW130 Service Manual – 355 Pages | OEM Factory Specs
Original price was: $94.90.$65.00Current price is: $65.00. -
Sale!

Fiatallis FD20 Service Manual (481 Pages) – OEM Factory Specs
Original price was: $93.60.$65.00Current price is: $65.00.




Thomas B. –
I am very pleased with this purchase. It is very easy to read on my phone without losing quality. Contains precise bolt torque specs for Fiatallis. I will definitely buy again.
William H. –
This is just what I was looking for. Immediate link after checkout. Contains precise wiring diagrams for Fiatallis. Worth every penny.
gearhead88 –
This is just what I was looking for. It is very easy to read on my tablet without losing quality. A must-have for any Fiatallis 545, mechanic doing maintenance. I will recommend this shop to others.