Description

Fiatallis 14C Parts Catalog – 695 Pages of Factory Part Numbers

If you’re chasing a part number for a Fiatallis 14C crawler and you’re flipping through some third-party reprint, stop. I’ve seen guys order the wrong final drive seal because the aftermarket catalog swapped a digit. This Parts Catalog from Fiatallis runs 695 pages and it’s the only document you should trust for ordering parts. OEM exploded views, factory part numbers, and revision lists that tell you exactly what superseded what. No guesswork.

Every section in this catalog is laid out by major system: Engine (A), Mechanical Transmission (B), Brakes (C), Frame/Steering/Undercarriage (D), Auxiliary Attachments (E), Electrical System (F), Air System (G), Body (L), Driver’s Seat (M), Tools (Z), Tables (T), plus lists of cancelled and new parts (X and Y). That’s printed right on page 1. You need a water pump seal? Flip to Section A. You’re rebuilding the final drives? Section B has the axle and transmission shaft drawings with callouts for every bearing and seal. The catalog also comes in five languages (English, Italian, French, German, Spanish) so if you’re working off a machine that shipped from Europe, you can still read the notes.

What the Catalog Covers – Section by Section

The major sections break down into dozens of sub-assemblies. I’m not going to list every page—there are 695 of them—but here’s what you’ll find: engine block and crankshaft details (Crankshaft is even listed in the OCR snippet on page 2), converter-to-transmission propellor shaft, clutch and transmission vent lines, brake booster and cross tube, cooling lines, alternator drive, and all the brackets and hardware you’d need to track down. Each part gets a factory number, a quantity, and a note about whether it’s been updated. That last part matters: the X and Y sections list cancelled and new parts for each revision. If you’re working on a machine that’s had field updates, you need those lists.

3 Reasons to Use OEM Documentation for the 14C

First, aftermarket catalogs often merge part numbers from different serial breaks. I’ve seen a brake pedal assembly that looked right in a third-party PDF but was for an earlier undercarriage. This OEM catalog gives you the exact exploded view for your specific 14C. Second, the factory prints include the correct installation direction for seals and bearings—things like which side of the seal faces the hub. Third, the revision lists (Section X and Y) let you cross-reference supersessions so you don’t order a part that’s been discontinued without a replacement. You get all that in one PDF.

Who Should Buy This Fiatallis 14C Parts Catalog?

If you own a Fiatallis 14C crawler, this catalog is the single most important document for keeping it running. Whether you’re a shop owner trying to order parts for a customer’s machine or a home mechanic who bought a surplus 14C to restore, you need OEM part numbers. I’ve watched guys spend hours on the phone with dealers because they read a part number wrong. With this catalog in hand, you point to the drawing and say “part 14C-015001”. That’s it. For related manuals, check out the FIATALLIS 14C 1989 Parts Catalog or the Fiatallis Crawler 14C Parts Catalogue Summary. Also see Fiatallis HD-9 1989 Parts Catalog – OEM Factory Specs if you have another model.

Why Not Aftermarket Reprints?

I’ve been wrenching since 1995. Aftermarket parts catalogs are fine for getting a general idea, but when you’re ordering a $800 final drive clutch pack, you don’t want a number that’s close. This is the original Fiatallis PDF, scanned from the factory binder. The quality isn’t glossy magazine—it’s a printed parts book that’s been used by dealers for decades. Every page number, every part callout matches the factory drawings. The Automotive Industry Overview shows how manufacturers standardize documentation; this catalog follows that standard. No aftermarket guesswork.

Torque Specs and Fluid Capacities: Where Are They?

This is a parts catalog, not a service manual. So you won’t find torque values or capacity charts here. But the Table of Sections includes a “T” section for Tables. That’s where you’ll find reference data like bolt torques and fluid volumes. If you need the service procedures, pair this with a factory repair manual. Otherwise, use the exploded views to ID the parts, then order from the factory numbers. That’s the efficient way.

FAQ

Does the catalog include part numbers for the undercarriage (undercarriage, track chains, sprockets)?

Yes. Section D covers Frame, Steering, Suspensions, Wheels, and Undercarriage (Cingolatura in Italian). Track chain assemblies, rollers, idlers, and sprockets are all listed with factory part numbers.

Is this the same catalog dealers use?

Yes. It’s the OEM printed parts book, digitized. Dealers used these to order parts for your machine.

Don’t waste time chasing bad part numbers. Access the Factory Manual and get the right parts the first time.