Description

FIAT Kobelco CK2000 2006 Parts Catalog – The Factory Reference for Backhoe Loader Repairs

You’ve been there: you pull a hydraulic line off a CK2000, the label is gone, and the aftermarket parts book you bought online says the part number is something that doesn’t cross-reference to anything you can find. That’s because somebody copied a copy of a copy and the numbers drifted. This manual is the original FIAT Kobelco CK2000 2006 Parts Catalog – printed in Japan by the manufacturer, 729 pages of exploded diagrams and factory part numbers. No guesswork, no aftermarket translation errors. You get the same document the dealer’s parts counter uses.

Before you order a single seal, understand this: a parts catalog is not a service manual. It won’t tell you torque specs or bleed procedures. But it will tell you exactly which part fits your machine’s serial number range. That’s the difference between a brake line that threads in and one that leaks under pressure. The FIAT Kobelco CK2000 Parts Catalog covers machines from serial number JC04-02001 onward. If your machine falls in that range, this is the reference.

729 Pages of Factory Parts Breakdowns

Every assembly on the CK2000 is broken down into itemized parts lists. The table of contents is dense: CONTROL SYSTEM, WINCH SYSTEM (with and without free fall), BOOM HOIST SYSTEM, SWING SYSTEM, LINES (over 30 subsections for hydraulic lines alone), POWER PLANT, ELECTRIC SYSTEM, CAB / GUARD / PLATFORM, LOWER SYSTEM, and CRANE ATTACHMENT. Each section uses the same numbering scheme described on page 4 of the manual: items are numbered 1, 2, 3, etc., with sub-assemblies taking a rotation like 1-1, 1-2. When you see a kit, it’s marked with “Consists of item ☆ to …”. That system is consistent across all 729 pages. You don’t need to flip through multiple sources to find a part number – it’s all in one place.

For example, the LINES section alone has 40+ subsections covering every hydraulic path: pump suction lines, delivery lines, control lines, drain lines, and the brake hydraulic lines. If you’re replacing a fitting on the BRAKE control circuit, you’ll find the exact part number under BRAKE CONTROL HYD. LINES. No cross-referencing to a generic chart.

Brake System Parts: Don’t Guess, Use the Factory Diagram

The brake system on a CK2000 backhoe loader is not something you want to cobble together with generic fittings. The manual includes a dedicated section for BRAKE PEDAL ASSY, BRAKE HYD. LINES, and BRAKE CONTROL HYD. LINES. Each line has a part number, a description, and a quantity per machine. The exploded view shows you exactly how the pedal assembly stacks together. If you need a replacement brake line, the diagram will show you the routing and the exact connector assembly. Ordering the wrong part can cause a delay – or worse, a failure on the job site. This manual eliminates that risk.

Why Aftermarket Parts Catalogs Cost You Time

I’ve seen technicians lose an hour trying to match a part number from a third-party “compilation” that claims to cover the CK2000. The problem is, those compilations often mix up front and rear winch assemblies, or they omit the sub-assembly numbers for the boom hoist reduction unit. This manual is the original OEM print from 2006, published by Kobelco Construction Machinery Co., Ltd. The notice on page 4 states: “As this parts catalogue also contains lists of parts based on specifications for machines other than that used by you, before ordering parts, be sure to confirm the specifications of your machine.” That’s honest. They’re telling you to check your serial number. Aftermarket reprints don’t include that warning because they don’t know the serial number ranges. If you want to avoid ordering the wrong part, stick with the factory source. For a deeper understanding of how the Internal Combustion Engine works with the hydraulic system, see Internal Combustion Engine on Wikipedia.

What You Get: Complete Assembly Breakdowns from Cover to Cover

Every major system is covered in its own chapter. The WINCH SYSTEM (WITH FREE FALL) includes WINCH INSTAL, WINCH ASSY (FRONT), WINCH ASSY (REAR), and WINCH ASSY – each with separate part numbers for the front and rear drums. The CRANE ATTACHMENT section lists insert booms in 10 ft, 20 ft, 30 ft, and 40 ft lengths, plus guy cables, jib assemblies, and strut assemblies. The LOWER SYSTEM covers the propel motor, reduction unit, idler, rollers, and shoe assemblies (42-inch and 48-inch options). The ELECTRIC SYSTEM has dedicated sections for the right deck, left deck, floor plate, relay box, and battery installation. If you’re troubleshooting a wiring harness, the Kobelco Hydraulic System Schematic Symbols and Abbreviations Guide can help you interpret the hydraulic diagrams, but the parts manual itself gives you the component-level part numbers.

Tool Requirements and Safety Notes for Parts Identification

You don’t need special tools to use a parts catalog, but you do need a clean workbench, a flashlight, and the ability to read a part number off the casting. Before you disassemble anything, relieve hydraulic pressure. The manual doesn’t tell you that – it’s a parts catalog, not a service manual – but I’m telling you. Use a pressure gauge to confirm zero pressure. Then remove the component and compare it to the diagram. Write down the item number from the diagram, then find the part number in the list. That’s the number you order. For the full service procedures including torque specs and fluid capacities, see the KOBELCO CKE1800 CK2000 Workshop Manual. And if you need to verify lifting capacities or dimensions, grab the KOBELCO CK2000 Specifications and Lifting Capacities sheet. Together, those three manuals give you everything you need to keep a CK2000 running.

Does this manual include torque specs?

No. This is a parts catalog, not a service manual. For torque specs, refer to the workshop manual.

How do I find the correct part number for my machine?

Page 4 of the manual explains the ordering process: you need your machine serial number, model, part number, part name, quantity, and shipping instructions. The parts list pages show the item number and part number for each assembly. For machines with serial numbers after JC04-02001, this manual applies. If your machine is older, check the applicable column in the parts list – some parts are marked with specific serial number ranges. When in doubt, contact your nearest Kobelco service station, as noted in the manual. The Automotive Industry Overview on Wikipedia provides context on how OEM parts catalogs are structured, but for the CK2000, this manual is the final word.

You’re here because you want the right part the first time. This factory manual gives you that. 729 pages, OEM diagrams, genuine part numbers, and the assurance that you’re not guessing. Access the Factory Manual and start identifying parts the way the dealer does.