Description

Dynapac V6030TV 2015 Parts Catalog – Factory Part Numbers You Can Trust

You need a guide cylinder for a Dynapac V6030TV 2015 Parts Catalog? Don’t guess the part number and end up with a cylinder that doesn’t match the mounting holes or stroke. That’s lost time, lost money, and a machine that sits. I’ve seen it happen too many times on job sites. This is the exact 248-page OEM factory parts catalog – the same one Dynapac dealers pull numbers from. No aftermarket re-draws. No partial lists. It’s the whole screed, from the basic width assembly to the 9-meter extension with gas heating.

V6030TV Basic Screed: Part Numbers and Guide Cylinder

Start with the main assembly (4812249711). Page 15 shows the complete basic screed layout. The guide cylinder (4812033035) is called out on page 19. That part also comes with a separate “Guiding cylinder” grouping on page 21 – make sure you order the right one. Vertical adjustments left and right (D614014900 / D614015000) are on pages 23 and 25. The hydraulic diagram for that section is on page 27. If you need the guide unit itself, that’s page 29. Every page has the original Dynapac part numbers, not some aftermarket cross-reference. Check the serial number range – this catalog covers V6030TV s/n 4100299 and up.

Gas Heating Assembly (4812249723) – Components

Gas heating comes as a complete assembly on page 35. Inside you’ll find the gas installation (D615021600) on page 44. The parts catalog lists every gas hose, valve bracket, and burner component. For the wear-prone gas hose kit, the OEM part number is 4812035288 – that’s in the service kits section on page 11. Don’t try to patch a gas line with hardware-store tubing; use the factory kit. The seal and fitting specs are only in this book.

Tamper Drive Assembly and Hydraulic System

Tamper assembly (4812249738) starts on page 50. You get exploded views of the drive central parts (left and right, pages 53 and 58), extension parts (pages 64 and 70), and the full tamper hydraulic system on page 76. Central lubrication routing is on page 82. If you’re replacing tamper bars, the wear part kit is on page 7 – comes with the bars and guide plates. The bearing kit for tamper wing (D299000250) is on page 13. These kits are the only way to get matched components that won’t cause premature wear.

Vibration Assembly Sections – Current and Earlier Versions

Two vibration assemblies live in this catalog. The current version (4812031824B) begins on page 93 with Gr.06 Vibration. Central and extension parts for left/right are pages 96–103. Hydraulic vibration diagram on page 105, central lubrication on page 108. The older version (4812218156) starts on page 116 and cross-references back to the same hydraulic and lube pages. The protection hood (4812035347) is on page 127. If you’re working on a machine built before a certain serial cut-in, you need to know which group to use – the book shows both.

Wear Part Kits: What You Need for Maintenance

The first section (pages 1–13) is pure gold for every shop. It covers service, repair, and wear part kits. Screed plate assembly kit, bottom plates/tamper cutter kit, tamper bars kit, tamper guide plates kit (4812035549). These aren’t generic “universal” parts – they’re Dynapac factory kits with the correct hardness, thickness, and bolt patterns. Using aftermarket bottom plates can throw off the screed angle and give you a bad mat. Save yourself the rework. This is the list of exactly what to order.

What This Manual Doesn’t Cover (And Why That’s Fine)

This is a parts catalog, not a service manual. You won’t find torque specs or step-by-step disassembly procedures. But for ordering the correct Cylinder, tamper components, gas hoses, or vibration parts – this is the only document you need. Pair it with the Dynapac service manual for your machine, and you’ve got the complete picture. If you work on multiple models, check out the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec for cold planer parts, or the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer. Another good reference is the Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings for a different machine line.

Source Authenticity: Why This Beats Aftermarket PDFs

The copy you get from AutoRepairManuals is the original 2015 Dynapac publication – PDF watermarks, part numbers, and all. Page 2 has the legal disclaimer about authorized parts and warranty void if you use unauthorized parts. That’s real OEM language, not some third-party rewrite. Aftermarket catalogs often omit the small fasteners, o-rings, and seal kits that you only find by page number. This one has them. For reference on the broader industry, you can see the Automotive Industry Overview but for this screed, trust the factory numbers.

Frequently Asked Questions

Does this catalog include torque specifications?

No. This is a parts catalog only – it lists part numbers, not assembly torque values.

How do I identify the correct part number for the guide cylinder?

Your V6030TV serial number must fall within the range covered (s/n 4100299 and up). Then go to page 19 in the catalog. The guide cylinder (4812033035) is shown with its mounting bracket and seals. If your machine has a different version, the “Guiding cylinder” section on page 21 may apply. Always double-check the part description against your existing cylinder dimensions – the catalog gives you the exploded view so you can verify bolt spacing and port locations.

Don’t order parts blind. Get the factory breakdown. Access the Factory Manual from AutoRepairManuals and keep it on your shop tablet or printed out. It’ll save you one wrong-order headache after another.