Description

Dynapac V6000TV 2015 Parts Catalog – The Only Parts List You Should Trust

If you’ve ever ordered a part for a Dynapac V6000TV and gotten the wrong size tamper bar, a mismatched guide cylinder, or a vibration eccentric that doesn’t fit, you know exactly why this Parts Catalog exists. I’ve been turning wrenches on heavy equipment for over 28 years, and I can tell you that aftermarket parts lists are a liability. They reprint old revisions, leave out serial number splits, and swap part numbers without telling you. That’s how you end up with a machine down for three days while you wait for the right hydraulic hose. This is the 2015 factory release – 396 pages of verified Dynapac documentation for the V6000TV tracked paver, serial number range 4100016 and up. No reprints, no third-party summaries. Just the exact part numbers Dynapac stamped into the steel.

Service, Repair, and Wear Part Kits – What the TOC Shows

Flip to the front of the catalog and you’ll find the service kits section. Bearing kits for the tamper drive (D299000249, D299000250), the gas hose kit (4812035288), wear part kits for tamper guide plates, tamper bars, bottom plates, and screed plate assemblies. When you’re ordering wear parts, you need the kit number – not a generic “tamper bar set”. The catalog gives you exploded diagrams with each kit’s contents. Page 3 lists all of them. If you’re rebuilding a screed, you’ll want the wear part kit for the screed plate assembly. That kit includes the exact fasteners and shims, not something a parts counter guy guessed at.

Mechanical Section: Basic Screed and Guide Cylinder

Under Mechanical, the Basic Screed assembly starts on page 17. The guide cylinder is a critical component – part 4812033035. That’s the cylinder that controls the screed’s vertical adjustment. You’ll also find the left and right vertical adjustment assemblies (D614014900 and D614015000) and the full hydraulic diagram on page 29. If your paver is drifting to one side during paving, you need that diagram to trace the hydraulic lines. The guide unit (4812044786) is on page 31. Don’t trust an aftermarket drawing that merges both sides into one generic image – the factory catalog separates left and right. You can see the protection hood for vibration on page 33, the external operating unit on page 35, and the roof profile setting mechanism on page 37. Every exploded view has a clear callout with the part number. No ambiguity.

Tamper Drive: Internal Parts Breakdown

The tamper drive section (starting page 58) covers the central part left and right, extension parts left and right, the tamper hydraulic system, and central lubrication. If you’ve got a tamper drive that’s making noise, you need the bearing kit numbers – D299000249 for the drive itself, D299000250 for the wing. The catalog lists each sub-assembly with its own exploded view. The hydraulic system for the tamper is separate from the vibration hydraulics. Mixing them up because some aftermarket catalog combined them? That’s a costly mistake. Stick with the factory document.

Vibration System – Current and Earlier Versions

There are two sub-sections for vibration: current (4812031824B, starting page 99) and an earlier version (4812218156, starting page 122). Why two? Because Dynapac changed the eccentric mounting and the hydraulic routing. The current version uses part numbers 4812031828A (left central), 4812031830A (right central), and extension parts 4812031831A and 4812031833A. The earlier version uses different numbers – 4812218164, 4812218165, etc. If you order the wrong vibration central part, it won’t bolt up. The hydraulic diagrams for each version are separate: 4812033476 for current, 4812033476A for earlier. Page 114 has central lubrication for both. You need the serial number of your machine to pick the right section. The catalog tells you exactly which serial range each covers.

Guide Plates and Adjustments – Get the Geometry Right

Guide plate assemblies are listed under 4812031206 (page 136). Left and right tamper guide plates for central and extension parts, hose guides, overlap plates, and adjusting screws. If your tamper bars are wearing unevenly, the guide plates are likely out of spec. The catalog shows the adjusting screw location and part number. The protecting hoods for the guide plates are also listed – left and right, central and extension. Don’t assume one hood fits all sides. The page numbers for each hood are in the contents. You’ll also find the footboard assembly (4812042859) and operation width 9.00m gas extension parts. The 750mm extension parts (left and right) include the tamper drive ext., vibration ext., guide plate ext., protection hood, gas heating ext., and bottom plate. Hardox 500 screed plate is part 4812042917 – 750mm. That’s the exact steel grade, not a generic substitute.

3 Reasons to Choose OEM Documentation Over Aftermarket

First, accuracy. Dynapac engineers stamped these part numbers. Aftermarket catalogs often copy the first edition and miss updates. Second, serial number splits. The V6000TV has multiple revisions – the vibration section alone has two. Aftermarket lists ignore splits. Third, kit contents. The wear part kits list every bolt, seal, and shim. You don’t get that from a generic parts PDF. This catalog is the same one Dynapac dealers use. If you want to see how Dynapac builds their equipment, check their official site Dynapac. For context on how factory documentation impacts the broader automotive and equipment industry, read the Automotive Industry Overview.

Does This Parts Catalog Cover the Gas Heating System?

Yes. The Gas heating complete assembly is listed under Mechanical (4812031839, page 41). It includes the ascent (4812011407) and the gas installation (D615021600). If you need the gas hose kit, that’s 4812035288 in the service kits section. The extension parts for 750mm also have dedicated gas heating ext. part pages. You’ll find the gas system for the 9.00m operation width on page 316. Every gas line and burner component has a part number. No guesswork.

What About the Cylinder Assemblies?

The guide cylinder (4812033035) is shown on page 21 with a full exploded view. The vertical adjustment cylinders (left and right) are on pages 25 and 27. The catalog also includes the guiding cylinder sub-assembly on page 23. If you need seals, you’ll have the cylinder part number to cross-reference. This is not a generic “cylinder” listing – it’s the exact Dynapac assembly.

Who Should Buy This 396-Page Catalog?

Anyone who owns or services a Dynapac V6000TV tracked paver – mechanics, fleet managers, rental yard techs, and serious DIY owners who don’t want to pay dealer markup on parts. If you’re rebuilding a tamper drive or replacing a screed plate, you save time by ordering the correct part on the first try. Beginners: this catalog shows you where every part goes. You don’t need to disassemble blindly. Mechanics: you know the frustration of a wrong part on a Friday afternoon. This is the fix.

Source Validity – Factory OEM, Not a Copy

This PDF is a direct scan of the original Dynapac publication, copyright 2015 by Dynapac (China) Compaction & Paving Equipment Co., Ltd. The part number on the title page is 4812204383. It’s the same document that comes with the machine when new. If you’ve been using aftermarket reprints that miss the central lubrication details or swap the tamper drive extension bearings, stop. Related manuals: Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec, Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer, and Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings.

Is this catalog the same as the shop manual?

No. This is a parts catalog – it lists part numbers, exploded diagrams, and kit contents. You need the shop manual for repair procedures, torque specs, and troubleshooting. But you cannot order parts accurately without this catalog.

Does it cover serial numbers below 4100016?

No. This version is for V6000TV machines with serial number 4100016 and up. If your machine is older, you need the earlier catalog. Check the serial plate on your frame.

Can I use this to identify wear parts for the tamper bars?

Yes. The wear part kit for tamper bars is listed in the first section. The catalog shows the bar dimensions and part numbers. You’ll also find the tamper guide plate kits. Just match your serial number to the correct sub-section.

How do I find the part number for a 750mm screed plate?

Look under the 750mm extension parts (left or right). The screed bottom plate is 4812240517, and the Hardox 500 version is 4812042917. Both are on the extension part pages. The catalog gives you the part number directly – no interpretation needed.

If you’ve ever been burned by a wrong part, you know the value of factory documentation. This Dynapac V6000TV 2015 Parts Catalog is the real deal – 396 pages of verified OEM information. Stop wasting time and money on aftermarket lists that get it wrong. Access the Factory Manual now and start ordering the right parts from the first call.