Description

Dynapac R300TV 2015 Parts Catalog

You have a Dynapac R300TV tracked paver on your lot. The screed is acting up, the tamper drive needs bearings, or you are chasing a gas heating leak. Without the right part numbers and exploded views, you waste hours flipping through aftermarket garbage that cross-references wrong. This is the real thing: the Dynapac R300TV 2015 Parts Catalog, 458 pages of OEM factory spare parts listings. Published by Dynapac (China) Compaction & Paving Equipment Co., Ltd. in November 2015. Covers serial number 4100017 and up. No reprints, no third-party guesswork.

Look at the table of contents. It starts with Service, repair and wear part kits – includes Wear part kit bottom plates for tamper cutters in AT 1000, AT 750, AT 500, and AT 250 sizes. That alone saves you from ordering the wrong set. Then the Mechanical section breaks down every subsystem: Basic screed with brace and ascent assemblies, roof profile setting (mechanical), gas heating complete, central lubrication, leveling, tamper drive, vibration assemblies (left and right), guide plates, warm air cover sheets, exhaust channels, and the grade control assembly. Each section has its own exploded diagram with callouts and part numbers. Page 35 covers the D430022400 tamper drive group – needed that last week on a job.

Wear Part Kits and Inspection Kits

These kits are not optional. The manual lists wear part kit bottom plates for tamper cutters in AT 1000, AT 750, AT 500, and AT 250 widths. You get the factory assembly numbers so you can order exactly what fits the R300TV screed. Also includes inspection kits – if you are doing a pre-season check, the part numbers are right there. No mixing up left and right sides.

Mechanical Assemblies: Basic Screed, Gas Heating, Tamper Drive

Basic screed section (part number 4812039762) includes the brace (4720006748) and left/right ascents (4812039284, 4812039290). Gas heating complete (4812040198) is covered with consoles and holding devices. Tamper drive groups – D430022400, D430022500, D430022600 – each have their own page. If you are rebuilding the tamper, you need those diagrams to identify the drive shaft, bearings, and seals. The vibration sections (left and right) list fixtures and hardware.

Guide Plates and Warm Air Cover Sheets

Guide plates (4812038673) are a common wear item. The manual shows the adjusting screw (4720006846), protection hoods (left and right), tamper guide plates, and guard plates. Warm air cover sheets (4812042216) and exhaust channels (left and right) are also detailed – critical for preventing overheating and asphalt buildup.

Is This the Right Manual for Your R300TV?

Yes, if your machine serial number starts with 4100017. The manual is specific to that range. If you have an earlier R300TV, verify with the serial plate. This is a genuine OEM publication – no aftermarket translations. The exploded views are clear, the part numbers are factory-verified. You can cross-reference with Dynapac”>Dynapac dealer catalogs. For broader context on construction equipment documentation standards, see Automotive Industry Overview.

458 Pages of Exploded Diagrams and Part Numbers

Every page in this Parts Catalog is a direct scan from the factory master. The index is structured by assembly group and component number. You get the exact part number, description, and quantity per assembly. No fluff. No generic illustrations. If you need to order a new exhaust channel for the left side, the manual lists 4812042217 and 4812042218 with callouts. You can hand that number to your parts supplier and get the right piece the first time.

Related manuals you might need: Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec”>Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec, Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer”>Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer, and Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings”>Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings.

Why OEM Matters for Parts Catalogs

Aftermarket parts catalogs often use generic drawings or list superseded numbers. This manual is the factory original – it came from Dynapac (China) Compaction & Paving Equipment Co., Ltd. The warranty statement on page 2 makes it clear: use only authorized parts. Any damage from unauthorized parts voids liability. If you are a shop owner or a fleet mechanic, having the OEM catalog on hand is your insurance against ordering the wrong part and eating the return shipping.

Frequently Asked Questions

Does this Parts Catalog include torque specifications or repair procedures?

No. This is strictly a spare parts list – exploded diagrams, part numbers, and quantities. For repair instructions, buy the separate Service and Operating Instructions from Dynapac.

Can I use this catalog to order parts for a R300TV with serial below 4100017?

Probably not. The manual explicitly covers machines from serial number 4100017 and up. Earlier machines may have different part numbers for tamper drives, guide plates, or basic screed components. Verify your serial before ordering.

Stop wasting time with aftermarket parts lists that leave you holding the wrong seal. Access the Factory Manual now – get the correct part numbers for your Dynapac R300TV and get that paver back on the road.