Description

Dynapac PL1000 2015 Parts Catalog

If you are ordering parts for a Dynapac PL1000 2015 Parts Catalog and you are using aftermarket exploded views, stop. I have seen shops burn a full morning because a third-party drawing swapped the left and right main frame brackets. This is the OEM file – 417 pages, straight from Dynapac (China) Compaction & Paving Equipment Co., Ltd., dated 2015-03. It matches the machine s/n 10000904V0C004406- and the Deutz TCD2012 L06 engine. No guesswork on part numbers.

7 Systems Broken Down with Exploded Views

The TOC is not a vague list. It goes down to individual sub-assemblies. Service kits – 500-hour (4700691333) and 1000-hour (4812001975) – have their own pages. The Frame section splits into Main Frame Left (with Flap, Bracket module, Broom holder option) and Main Frame Right (Covering includes Engine hood left, right, upper part, Grid, Dipstick). You get the exact bolt count and washer size. No translating a generic diagram.

Milling Unit: Drums, Bits, and Hydraulics

Milling unit chapter covers everything from the Front plate hydraulic assembly to the Scraper safety-catch. You will find Planing drum KPF 301, Precision planing drums KPF 201 and C10 HD, and the Bit tools section. The hydraulic components for the Scraper include the Main control block and Steering block, plus the D965080170 Hydraulic cylinder. If you need to rebuild the milling box left or right side, the exploded view on pages 57-59 shows each seal and bearing.

Engine, Power Transmission – Real Part Numbers

The Engine section starts on page 83. It covers the Deutz TCD2012 L06 – the pumps (4812000019 Pump Drive function with its rotary group, control, port plate, pump support plate, control module), 4812003521 Pump Cylinder function, D967088023 Pump Conveyor function, Clutch/Tensioner, 4812000009 Clutch, Pump drive shaft 4812000172, Angular gear 4812000010. The cooler unit (4812000008 Combination cooler) and exhaust system are also listed. You are not going to order the wrong fan – the part number 4812000048 is right there on page 127.

Drive System and Steering – Hydraulic Schematics Included

Wheels module/Levelling breaks down into Hydraulic components (Flow divider 4812000014, Coil 24 VDC 4812158989), Chassis leg hydraulics (motors 4812003712 with rotary group and control), and foldable leg control block. Steering section has its own hydraulic components. The electric components for the wheels module list sensors and wiring. This is not a generic diagram – it is the actual layout used on the assembly line.

Who Needs This Manual

You are a shop owner with a PL1000 in the bay, or a fleet mechanic responsible for two or three compact planers. The first time you try to order a hydraulic cylinder without the OEM drawing, you risk getting the wrong stroke. The DIY owner who does his own maintenance – you need the 500-hour service kit breakdown so you do not miss a seal. The Parts Catalog is not a repair manual; it is the ordering bible. Pair it with the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec if you have the larger rig.

Source Validity: Why OEM Beats Aftermarket

This file is the original 2015 Dynapac publication. The copyright line is on page 1 – official. Aftermarket catalogs often re-use old illustrations and miss updates. For example, the Precision planing drum C10 HD was introduced in 2014; a third-party book might show the older KPF 201 drum only. The OEM version shows both. Dynapac archives are not always available online, but this is a verified factory scan. Compare it to the Automotive Industry Overview standard – this is the level of traceability needed.

FAQs

Does this Parts Catalog include torque specs for the engine?

No. This is a parts listing – exploded views and part numbers only. For torque specs, you need the service and repair manual.

Can I use this to order parts for a PL1000 with a different serial number range?

The catalog is specifically for PL1000 s/n 10000904V0C004406- and the Deutz TCD2012 L06 engine. If your machine serial falls outside that range, some components may differ – check with your dealer before ordering. The frame, milling unit, and hydraulic components may have been updated in later production runs. Always verify part numbers against your machine’s serial tag. That said, the majority of the chassis and wear parts (bits, belts, filters) carry the same part numbers across the PL1000 line from 2013-2016, but the hydraulic pumps changed in 2015 with the introduction of the 4812000019 Pump Drive function. The catalog shows both old and new configurations only if they were in production at the time of printing. For absolute certainty, cross-reference the exploded view with the actual component on your machine.

If you maintain a PL1000, you need the factory part numbers on your workbench. This 417-page PDF saves you the phone call to the dealer parts counter every time. Access the Factory Manual now and keep the correct seals, bearings, and hydraulic motors in stock.

Related Manuals

• Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer
• Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings