Description

Dynapac F1000T 2015 Parts Catalog – Factory OEM Specs for Tracked Paver

If you are ordering parts for a Dynapac F1000T crawler paver with a Tier IV Cummins QSB 6.7, you do not want to trust an aftermarket parts list. I have seen too many jobs held up because someone ordered the wrong auger extension or hopper skirt. This is the genuine 2015 **Dynapac F1000T 2015 Parts Catalog** – 642 pages of nothing but factory part numbers, assemblies, and service kit breakdowns. No reprints, no third-party summaries. Just the OEM documentation that Dynapac (now part of Atlas Copco) released for machines with serial number 10002124K0C002318 and up. You need this on your tablet or printed out before you touch a single bolt.

Dynapac F1000T 2015 Parts Catalog: Why It’s the Only One to Trust

Aftermarket parts catalogs often re-number parts, skip fastener details, and omit superseded revisions. This catalog came straight from the Dynapac factory floor. Every part number – from the 4812269054 start-up kit (100 hours) to the D717955090 uptime kit – ties back to the original engineering drawings. If you need the left auger extension (D722182100) or the seal beading for the air filter cover (4812222079), you find it here, exploded and labeled. No guessing.

What the TOC Tells You About This F1000T Catalog

Open the table of contents and you see exactly how this machine breaks down: service kits first, then mechanical assemblies (frame, conveyor, hopper, basic auger), then operator platform. Page numbers for every subassembly. For example, the conveyor drive complete assembly starts on page 85, with separate pages for the motor/gearbox (page 87) and drive (page 89). Need the tension assembly? Page 91. The catalog uses the same part numbering system Dynapac uses for warranty claims. If your dealer asks for a part number, you give them the one from this book. Period.

Service Kits: 100, 500, and 1000 Hour Maintenance

One section I use constantly is the service kits. The 100-hour start-up kit (4812269054) includes all the filters, belts, and seals you need for first service. The 500-hour maintenance kit (4812269055) and 1000-hour kit (4812269056) are listed with individual item numbers inside. You can buy the entire kit or piece it out. The same applies to the conveyor chain kit (4812269058) and the guide kit (4812269060). Having factory kit part numbers saves you from cross-referencing aftermarket garbage.

Frame, Conveyor, Hopper, and Auger Assemblies

The mechanical section covers the big iron. Frame assembly (page 61) includes the 10′ crawler paver frame, front conveyor cover, guide pole, adjustable scraper, and fume extractor (blower part number D717012501). The conveyor assembly (page 83) has the complete drive, tension, chain, and lubrication. Hopper assembly (page 95) splits left and right sides. The basic auger 3000mm (4812249999) includes the height guard, auger gear, flight assembly, main bearing, and backplate. You also get the center auger hydraulic kit (4812204590) with motor and hose kit. Every bolt, every beading strip, every wear plate – it is all here. The catalog even includes the auger reinforcement kit (4812269105) and bogie wheel kit (4812313163).

Shop Floor Tips: Using the Manual Properly

Print the exploded view for the assembly you are working on. Circle the part number. Write the serial number of your machine on the page. Never order a part without confirming the revision level – Dynapac updates part numbers, and this 2015 catalog includes the latest supersessions at the time of printing. And do not ignore the note on page 2: “Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.” Those are not lawyer words; they are shop reality. If you need to see how the Automotive Industry Overview connects to your machine, check Automotive Industry Overview. For more on the larger Dynapac lineup, see Dynapac F1000T 2015 Parts Catalog and the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec or the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer.

Frequently Asked Questions

Does this manual include torque specs?

No. This is a parts catalog, not a service manual. You need the separate service manual for torque values and repair procedures.

How do I identify the correct part number for my auger extension?

You will need the serial number of your paver. The catalog has exploded diagrams with callouts. Locate the assembly (e.g., page 21 for 4812224488 auger extensions). Each component has a part number. Cross-reference with your machine’s serial number range (s/n 10002124K0C002318-). If you order wrong, you waste money. Use the factory catalog to get the exact left or right extension (D722182100 or D722182200). The catalog also shows the beading and hardware for each side. Do not assume a generic part will fit – the hopper skirt low version kit (4812244099) is different from the standard hopper skirt kit (4812269057). Get it right the first time.

Stop wasting time on third-party parts lists that might be outdated or plain wrong. When you order from this catalog, you order what the Dynapac engineers intended. Every part number, every kit, every assembly is verified against the factory master. Access the Factory Manual now and keep your F1000T running with OEM parts.