Description

Dynapac CG223HF Parts Catalog

If you are ordering parts for a Dynapac CG223HF and you do not have the factory Parts Catalog in front of you, you are wasting time. I have seen more than one guy order a hydraulic filter by guess and then stand around waiting for the wrong one to show up. This catalog, all 229 pages, gives you the exact part numbers, exploded views, and ordering instructions straight from Dynapac. No aftermarket nonsense, no reprints of some third-party scan where the numbers are blurred. This is the OEM document that the dealer uses.

Ordering Spare Parts: The 6 Critical Details

Page 4 of this catalog lays out exactly what you need to give your dealer to avoid errors. You need the machine type, the roller serial number, quantity, part number, part denomination, and dimensions if ordering per length. I have seen guys skip the serial number and end up with the wrong vibration motor. Do not be that guy. The catalog also lists the engine—Deutz BF4M 2011—and the valid serial number range starting at 85110223. If you do not have your serial number, you are guessing. Stop guessing.

What This Parts Catalog Covers

This document covers every replaceable component on the Dynapac CG223HF vibratory roller. Frame, drum, engine group, hydraulic system, electrical wiring, and more. Each section breaks down the assembly into exploded drawings with callouts matching the part number table. You get the part number, description, quantity per assembly, and sometimes notes about superseded parts. It is not a repair manual—there are no torque specs or service intervals here—but for sourcing parts, this is the only source that matters.

229 Pages of OEM Part Numbers

229 pages does not mean fluff. That is every nut, bolt, filter, seal, hose, and bracket listed with factory numbers. The catalog is organized by groups—look at the table of contents page 5: Group 3 is the engine, Group 4 is the transmission, and so on. Each group has its own page range. You flip to the group, find the exploded view on the left page, and the parts list on the right. Cross-reference the index number. Done. No need to hunt through generic catalogs that sort by part number you do not have. This manual works forward from the assembly.

Understand the Exploded Views Before You Order

One warning: the exploded views are not to scale, but they show fastener locations and orientation. Look at the remarks column on page 3—there are notes for specific items like “order per length” for hydraulic hoses. If you miss that note, you get a hose that does not reach. I have learned to read every note in the margins before I pick up the phone. The catalog also includes a “Changes” section on page 5 to track revisions between catalogue issues SCG223HF-1EN1 and SCG223HF-1EN2. That matters when you have a machine built early in the production run.

Dynapac CG223HF Parts Catalog: No Aftermarket Guesswork

A lot of places sell “compatible” parts books that copy numbers from this catalog and make mistakes. A hydraulic pump seal cross‑reference might be off by a millimeter, and then you have a leak you cannot trace. I stick to the factory source. This is the same PDF that Dynapac ships to its dealers. The ordering instructions on page 4 are multilingual—English, Swedish, German, Italian, Spanish, French—because this machine works worldwide. Your job is to get the right numbers. This catalog gives you that.

Related Manuals

• Dynapac CG223HF Parts Catalog
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec
• Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer

For more context on why factory documentation is the standard, check this Automotive Industry Overview. Same principle applies to construction equipment: you cannot rely on generic cross‑reference databases.

Frequently Asked Questions

Is this the repair manual or parts catalog?

It is a parts catalog only. No repair procedures, torque specs, or diagnostic steps.

Can I use this to order parts for a CG223HF built before 2005?

The catalog is valid from serial number 85110223 onward. Early machines (pre‑2005 under SCG223HF-1EN1) are covered by the first issue, but this update replaces it. You will need to check the change notes on page 5 for parts that were superseded. If your machine is older than that, contact Dynapac with the serial number to verify compatibility—some engine components changed between issues.

Do I need the roller serial number to use this catalog?

Yes. Without it you cannot confirm which engine or hydraulic pump your machine has. Do not skip this step.

What engine does the CG223HF use?

The CG223HF is equipped with a Deutz BF4M 2011 diesel engine. This catalog lists that engine group separately with its own parts breakdown. However, note that Dynapac could substitute engine brands on later production runs—always cross-check the serial number against the engine listing inside the catalog. The parts for that engine include injectors, pistons, cylinder head components, and cooling system pieces. If you need a replacement fuel pump or starter motor, the part numbers are inside group 3. Do not assume a Deutz part number from a different manual is the same; use this catalog specifically for the CG223HF roller.

Access the Factory Manual and put it on your tablet in the shop. You will stop ordering wrong parts, and you will stop holding up the job. That is what this PDF is for—no fluff, just the numbers you need.