Description

Dynapac CC722C 2006 Parts Catalog – Stop Guessing Part Numbers

If you’re turning wrenches on a Dynapac CC722C vibratory combination roller, you already know the pain of chasing aftermarket part cross-references that don’t match. I’ve been in the trade 28 years, and nothing wastes a half-day faster than ordering a seal that’s 2mm off because some third-party database had a typo. That’s why this 2006 Parts Catalog matters. It’s the exact document Dynapac’s own parts counter references when you call in with a serial number. 215 pages of OEM part numbers, exploded views, and the ordering procedures that keep your machine running.

Exploded Views and Genuine Part Numbers

Every group in this catalog is laid out the way Dynapac engineers intended – not some re-drawn landfill. You get the exact figure for each assembly: drum group, frame, steering, hydraulics, engine mounting. Opposite each figure is a parts table with item numbers, part numbers, quantity, description, and any service notes. I’ve seen aftermarket catalogs that lump drum parts into one blob. This one separates the vibration motor mount from the drum shell, so you order the right bolt set. Page 73 shows the vibration system components with hardware torque callouts in the remarks column – those notes matter when you’re rebuilding a drum that sees 3000 hours a year.

7 Systems Covered in the Parts Breakdown

The catalog organizes the Dynapac CC722C into logical groups: engine and cooling, transmission and final drive, steering, braking system, electrical system, frame and ROPS, and the vibratory system. Each group starts with a cover sheet listing which serial numbers apply. That’s critical because Dynapac made running changes – the SCC722C-1EN3 edition you’re looking at supersedes the 2002 and 2005 versions. If your machine serial number falls outside the range listed on page 3, you need the earlier catalog. The parts catalog tells you exactly what changed between revisions instead of leaving you to guess which bracket fits.

Ordering Spare Parts: The 6-Point Routine

Page 4 has the ordering checklist in five languages. When you call your dealer, you give: machine type, roller serial number, quantity, part number, denomination, and dimensions if it’s a cut-to-length item. Missing any one of those and the order gets kicked back. I keep a printed copy of this page taped to my toolbox because parts guys will hang up on you if you rattle off “I need a bearing for a CC722C.” You need the serial number – it’s stamped on the frame near the engine mount. The catalog reminds you: your agent/dealer information is filled in on page 4. Fill it out before you lose the slip.

Source Authenticity: OEM vs Aftermarket Specs

This Parts Catalog is a direct scan of the original 2006 Dynapac publication printed in Sweden. No re-drawn diagrams, no transcription errors. On page 5, there’s a notes section that lists group changes and service info updates – the kind of detail aftermarket houses strip out to save paper. If you’re maintaining a fleet of compaction equipment, you can’t afford to install the wrong vibration isolator because a cross-reference chart used a generic rubber durometer. The OEM part number is your only guarantee that the bracket welds line up with the frame holes. Related manuals like Dynapac CC722C Parts Catalog and Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec follow the same factory format. For the cold planer side, check Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer.

For broader context on machine maintenance standards, see the Automotive Industry Overview on equipment lifecycle management.

FAQ – 4 Questions You’ll Ask Before Buying

Will this parts catalog work for my 2007 CC722C?

Only if your serial number matches the range listed on page 3. The 2006 edition runs from 64020722 through 64020729. Later machines used different engine mounts and cooler packages.

Does it include exploded hydraulic hose diagrams?

No. This is a parts catalog, not a hydraulic schematic manual. You get group-level exploded views with hose part numbers, but not routing lengths. For routing, you need the service manual.

Are electrical part numbers listed?

Yes. The electrical group covers the harness, switches, sensors, and control modules with OEM numbers. But you still need the actual wiring diagram for troubleshooting – the parts catalog only shows the connectors and their part numbers.

How do I confirm a part number before ordering?

Look at the figure group that matches the assembly you’re working on. Cross-reference the item number in the table. If the part has a “Notes” code (e.g., a triangle symbol), read the remarks at the bottom of the page – they tell you about superseded parts or special order items.

Don’t let a misordered seal cost you a weekend. Access the Factory Manual from AutoRepairManuals and keep your CC722C rolling.