Description

Dynapac CC722 2010 Parts Catalog – OEM Spare Parts Manual

I’ve seen guys order a part for a Dynapac roller by walking up to the counter with a grease-stained scrap of paper and a number they wrote down wrong. That’s how you end up with a $1,200 mistake and a machine sitting for a week. The Dynapac CC722 2010 Parts Catalog fixes that. It’s the factory-issued spare parts catalogue, straight from Dynapac, covering the CC722 vibratory roller with the Cummins QSB 6.7C diesel engine. 188 pages of exploded diagrams and part numbers you can trust. Not a reprint. Not a photocopy. Original OEM documentation.

Here’s what you get: a proper parts list organized by group, with clear ordering instructions. Page 2 of the manual spells out exactly what you need to provide when you place an order – machine type, serial number, quantity, part number, denomination, and dimensions if it’s a length item. Miss any of those six and you’re asking for a wrong delivery. The catalog includes a notes section (page 3) that explains how to read the group structure, including indentations that indicate sub-assemblies. Parts with a dot and shifted right are included when you buy the assembled unit above. That saves you from ordering duplicates.

Why You Need the Dynapac CC722 2010 Parts Catalog

Aftermarket parts catalogs for heavy equipment are a gamble. They often use outdated numbers or mislabel components. This catalog is the same one used by Dynapac dealers. It’s the source truth for part numbers. If you’re rebuilding a CC722 roller — whether it’s the vibration system, steering, or engine — the correct part number is critical. The Dynapac CC722 Parts Catalog gives you that. No need to cross-reference three different websites. One document, 188 pages, factory-vetted.

Ordering Spare Parts: The 6 Required Data Points

Page 2 of the catalog is your checklist. You must provide: 1) machine type (CC722), 2) roller serial number (valid from 10000325x0A000001), 3) quantity, 4) part number, 5) part denomination, and 6) dimensions if ordering per length. Without the serial number, the wrong part is almost guaranteed because Dynapac made running changes. The manual also lists the catalogue issue date (2010-02) and notes that specifications can change without notice. That’s why you always reference the latest issued catalog for your serial number range.

3 Reasons OEM Documentation Beats Aftermarket Catalogs

1. Factory part numbers with revision history. This catalog includes service codes — “A” means the part is a service item. Aftermarket catalogs skip that detail.
2. Exploded diagrams with correct orientation. The drawings come directly from Dynapac CAD files. What you see is what you order.
3. International ordering info. The catalog includes text in English, German, Italian, Spanish, and French (page 2). Hand it to any parts counter worldwide and they’ll know exactly what you need.

That last point alone saves hours of translation errors. I’ve been on both sides of that counter.

What Does the Parts List Group Structure Look Like?

Page 3 describes the layout. Each group has its own page range. Parts indented with a dot are sub-components of the main assembly above them. Remarks at the bottom of each parts list explain special notes — for example, if a part is only sold as a set. The notes column also includes service info codes. If you see “A”, that part is a common wear item. Stock it. The group index at the front lets you jump directly to the section you need — engine, drive, frame, etc. No flipping through 188 pages blind.

Cross-Reference Your Serial Number Before Ordering

This catalog covers rollers with serial numbers starting from 10000325x0A000001. If your machine is earlier, you need a different issue. The manual’s validity range is printed inside the front cover. Verify it before you buy. The Dynapac CC722 Spare Parts Catalogue also includes a note that Dynapac reserves the right to change specifications — so always confirm with the latest data. But for the 2010 model year CC722, this is the only catalog you need.

No aftermarket approximations. Only factory data.

For more about the manufacturer, see Dynapac official site. The importance of OEM documentation is recognized across the Automotive Industry Overview but applies just as much to heavy equipment. If you’re serious about keeping your CC722 on the job, get the factory catalog. Dynapac CC722 2010 Parts Catalog – OEM Spare Parts Manual is ready for access.

Frequently Asked Questions

Can I use this catalog for other Dynapac models?

No. It only covers the CC722. Other models need their own catalog.

How do I ensure I order the correct part using this catalog?

First, locate your roller serial number – it’s stamped on a plate attached to the frame. Write it down. Then find the group section covering the assembly you need – the catalog has an index of groups. Use the exploded diagram to identify the part. Note the part number and the quantity. Check the remarks for any notes – for example, some parts are only sold as a set. Then follow the ordering instructions on page 2: provide machine type (CC722), serial number, quantity, part number, part denomination, and dimensions if required. Double-check the part number against the diagram orientation – parts can look similar but have different numbers. If in doubt, call your dealer with the serial number and part number from this catalog. This manual eliminates guesswork because it uses factory data, not aftermarket approximations.

Access the Factory Manual and start ordering parts correctly. Your roller will thank you.