Description

Dynapac CC422VHF 2006 Parts Catalog

If you’ve ordered a part for a CC422VHF only to find the aftermarket listing doesn’t match the bolt pattern or hydraulic line length, you know the pain. That’s the cost of relying on third-party parts catalogs that guess at part numbers. The official Dynapac CC422VHF 2006 Parts Catalog kills that guesswork. 199 pages of factory exploded views and OEM part numbers, assembled by the same engineers who built the roller. No aftermarket shortcuts. No generic numbers.

199 Pages of Factory Exploded Views

This catalog is the same document the dealer uses. Each group – engine, drive, vibratory system, frame, electrical – is broken down into numbered exploded views. You get the part number, description, quantity per assembly, and any notes specific to serial number ranges. The Cummins 4B 3.9 TAA diesel engine section alone runs several pages. Page 4 tells you exactly what info to give when ordering: type, serial number, quantity, part number, denomination, and dimensions if buying by length. Miss any of those six items and the wrong part shows up.

Order Parts Correctly the First Time

I’ve seen guys skip the serial number step, order a hydraulic filter, and end up with the wrong thread pitch because they assumed all CC422VHF rollers were identical. They’re not. This manual lists valid serial number ranges on page 3. If your roller serial number falls outside the listed range, you need to contact the dealer with the exact number before ordering. The catalog includes a table of “Published catalogue issues valid for these rollers” so you know if the 2006 issue covers your machine. Don’t guess.

Spare Parts Ordering: What You Need to Tell the Dealer

Open page 4 and you’ll see the six-point ordering checklist. Most aftermarket parts lists just give you a part number and assume you can figure out the rest. Not this one. It demands you provide the roller serial number (49720423 and up), the part number, and the correct denominazione (description). In the notes section on page 5, parts indicated by a dot have remarks at the bottom of the parts list. Read those remarks – they often flag superseded parts or interchange restrictions. A half-second glance at those notes saves a week of waiting for the wrong hydraulic line.

What’s the Correct Part Number for the Vibration Motor?

The vibration system in the CC422VHF is not the same as the earlier CC422. The 2006 manual reflects the updated design. You can’t cross reference from a generic bearing catalog and expect it to survive under compaction loads. The exploded view for the vibratory assembly shows every bearing, seal, and eccentric weight with the Dynapac part number. Use that number when ordering – don’t substitute. If you need the service manual for torque specs on the eccentric retainers, that’s a different document. This parts catalog keeps your inventory accurate.

Source Authenticity: OEM vs Aftermarket

This file is a direct scan of the original Dynapac spare parts catalogue printed in Sweden. The footer says “We reserve the right to change specifications without notice. Printed in Sweden.” That’s the real deal. Aftermarket parts catalogs for this machine often omit the Cummins engine group entirely or use generic illustrations. This one includes the full Cummins 4B 3.9 TAA parts breakdown because Dynapac built the roller around that engine. If you’re rebuilding a CC422VHF and need to order a piston ring set or injector nozzle, the engine group page lists the Cummins part numbers – not some aftermarket renumbering.

Related manual: Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec covers the cold planer that shares some hydraulic components. Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer is another reference if you have a mixed fleet. For a wider look at how the construction equipment industry structures part numbering systems, see Automotive Industry Overview. The Automotive Industry Overview also touches on standardization trends.

Does This Manual Cover the Vibratory Tandem Roller CC422VHF?

Yes. The cover states “Vibratory Tandem Roller CC422VHF” and the model code is SCC422VHF-1EN2. The engine is the Cummins 4B 3.9 TAA. It covers all serial numbers from 49720423 onward. If your machine is older than that, you’ll need the earlier SCC422VHF-1EN1 issue from 2005. The 2006 catalog supersedes that earlier version.

Does this manual include torque specs?

No. This is a parts catalog, not a repair manual. For torque values on head bolts, bearing caps, or hydraulic fittings, get the service manual.

Can I use this to identify parts for a 2007 model?

No. The 2006 catalog covers 2006 production. 2007 rollers may have different serial number ranges and part updates.

How do I find the correct part number if my roller’s serial number is not listed?

Check the table on page 3. If your serial number falls outside the range given (49720423 and up), the catalog may still be correct, but you should verify with Dynapac. Provide the roller serial number, type (CC422VHF), and engine model (Cummins 4B 3.9 TAA). The ordering instructions on page 4 are there for a reason – follow them. The catalog includes notes for specific serial number breaks. If a part was superseded, the note will say “see change in group”. Ignoring that will get you a part that doesn’t fit. Aftermarket catalogs rarely carry these serial-number-specific annotations; this one does, because it’s factory.

Is this a genuine Dynapac factory document?

Yes. It is the official OEM Spare Parts Catalogue, SCC422VHF-1EN2, published in 2006 by Dynapac in Sweden. The PDF is a direct scan of the original printed document. No aftermarket reprints or third-party reprocessed data.

Stop wasting time on parts that don’t line up. You’ve got the serial number, you’ve got the exploded view – now you can order what actually bolts on. Access the Factory Manual and keep your CC422VHF running without the parts-desk headache.