Description

Dynapac CC4200 2015 Parts Catalog

You’ve got a CC4200 in the shop, the serial number starts with 10000345x, and you’re hunting down a part. Maybe it’s a steering cylinder, maybe a sprinkler pump. You pull up some third-party site, they show a picture that sort of looks right, but you’re not sure if it’ll fit your machine built after serial number break. That’s exactly where this Dynapac CC4200 2015 Parts Catalog kills the guesswork. 600 pages of factory-issued part numbers, exploded views, and serial-number-specific breakpoints. No aftermarket abbreviations, no “this may fit” disclaimers. You get the same binder material the dealer’s parts counter uses.

Service Kits and Repair Kits: What the Catalog Covers

Turn to page 3 and you’re staring at service kits indexed by hours: 50-hour Plus (part 4812159352), 500-hour for the Cummins QSB 4.5 (4812159353), 1000-hour, 2000-hour, plus a start-up kit. Each kit has its own exploded diagram with callouts. Need the eccentric shaft repair kit? That’s 4700945903 on page 17. Drum rotation kit, scraper kit, shock absorber kit, sprinkler kit—they’re all listed with individual part numbers. If you’re rebuilding the drum or swapping seals, you order the exact bag of parts, not a handful of guesses.

Frame Sections and Drum Assembly Breakdown

The frame section covers front frame (starts page 31), rear frame, sprinkler system, and both end frames. Each subsection has separate modules: steering cylinder (4700391023), hitch modules with two serial number breakpoints (To A016642 and From A016643), articulated joint (4812117737) for the earlier build, steering hitch (4812119139) for the later. You also get the noise suppression plates, grab handles, and the cocoa mat assembly. The drum section (starting after frame) covers drum bearing, drive unit, and scraper brackets. No generic diagrams—these are Dynapac originals with the correct orientation and fastener callouts.

7 Major System Groups in This Catalog

Service kits (7 kits), repair kits (5 kits), general (keys and fuses), front frame, rear frame, sprinkler system, end frames front and rear, and drum. That’s eight groups if you count the drum separate, but the TOC groups them logically. Every group includes a serial number range. For example, the sprinkler pump module splits at SN 0A013069. You order the wrong pump module if you skip that break. This manual forces you to check your machine’s serial before you click “buy”.

Why OEM Documentation Matters for the CC4200

I’ve seen aftermarket parts catalogs label a steering cylinder as “fits CC4200” when it’s actually the wrong stroke length. The genuine Dynapac catalog uses the exact part numbers from the factory: 4700391023 for the steering cylinder, 4812121586 for the left cover. The manual itself states on page 2: “Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.” That’s not a legal fine print—that’s a warning from the engineer who designed the machine. I’ve had guys bring in rollers with cracked frame mounts because they used a generic hydraulic fitting. Don’t be that guy.

Who Needs This Parts Catalog?

If you’re a shop owner stocking parts for a fleet of compactors, or a one-man operation maintaining a single CC4200, this catalog saves the back-and-forth with the dealer counter. Home garage enthusiasts? Probably not your daily driver, but if you bought a used roller for a land-clearing project, you need the correct water pump part number for the sprinkler system (sprinkler pump module, page 85 or 89 depending on serial). Beginners should understand: a parts catalog does not tell you how to rebuild the engine—that’s the service manual. But if you’re ordering a part, this is your single source of truth.

Does this parts catalog include torque specs or repair instructions?

No. This is a parts catalog, not a service manual. It lists OEM part numbers, exploded views, and quantities. For installation torque values, use the factory service manual for the CC4200.

Can I use this catalog to order parts for a CC4200 with a serial number outside the range shown?

The catalog covers CC4200 (IIIB/T4i) serial numbers starting from 10000345x0A012713. It includes multiple breakpoints within that range—for example, the hitch module splits at A016642 and A016643, and the sprinkler pump splits at SN 0A013069. If your machine is older than that start serial, you need the earlier edition. Check the serial plate on your frame before ordering. The 2014 edition (link below) may match pre-2015 machines.

Related Manuals

• Dynapac CC4200 2014 Parts Catalog
• Dynapac CC4200 CC424 524 624 5200 Operators Manual – 152 Pages
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec

For more about the manufacturer, visit the official Dynapac site. Understanding the broader context of construction equipment manufacturing can be found in the Automotive Industry Overview.

You’re staring at a CC4200 with a blown eccentric shaft bearing. You could call the dealer, give them your serial number, wait on hold, and hope the counter kid reads the right line. Or you open this 600-page PDF, find the eccentric shaft kit (4700945903), order the part, and have it in your hand tomorrow. That’s the difference between guessing and using the factory data. Access the Factory Manual and get the part numbers straight the first time.