Description

Dynapac CC334HF 2009 Parts Catalog – OEM Factory Spare Parts Guide

Nothing wastes billable hours like ordering the wrong part because you trusted a generic parts list or a third-party cross-reference that was off by one digit. I’ve seen it a hundred times – a shop waits three days for a pump, opens the box, and the mounting flange is wrong. That’s why the Dynapac CC334HF 2009 Parts Catalog exists. This is the exact document Dynapac printed for their dealers and service centers. 455 pages, factory binding, direct from the source. If you work on a CC334HF vibratory roller, this is the only parts list you should trust.

Ordering Spare Parts: The 6-Point Checklist (Page 4)

The manual opens with a full-page instruction on how to order parts correctly – six steps that most people skip, and then wonder why their order shows up wrong. You need: machine type, roller serial number, quantity, part number, parts denomination, and dimensions if ordering by length. That serial number is critical – Dynapac lists the exact serial range for this SCC334HF-1EN2 catalog: starting from *284S00006*. If your roller fell outside that range, you need a different catalog. Don’t skip this step.

Why Use a Factory Parts Catalog Over Aftermarket?

Aftermarket catalogs mix drawings from different years, change part numbers without telling you, and often omit the little items like sealing washers or o-rings that hold the whole job together. This Parts Catalog gives you the genuine exploded view and the exact part number that Dynapac stamped on the bin. The error rate on aftermarket lists for heavy equipment is brutal. I’d rather spend ten minutes verifying a part number here than three days waiting for a return.

Cummins QSB 3.3 Engine Coverage

This vibratory roller runs a Cummins QSB 3.3 diesel. The catalog breaks down the engine with individual part numbers for injectors, gaskets, filters, and the entire fuel system. If you need an injection line or a specific bolt, the drawing shows exactly which one. No guesswork – the part number is right next to the callout. For anyone doing an inframe or a top-end overhaul, this alone is worth the price of the access.

Inside the 455-Page Document: What You Get

The catalog is organized by groups – each major system gets its own section with exploded diagrams and a corresponding parts list. There are text pages that explain remarks and service info, and change notes so you know if a part superseded another. You also get the printed ordering page in multiple languages: Swedish, German, Italian, Spanish, French, and English. That makes it usable for shops with mixed-language crews. Every page is the same OEM format that Dynapac used in 2009.

If your roller is a later model, you might also want the Dynapac CC334HF 2010 Parts Catalog for updated serial ranges. For a broader perspective on machine maintenance, see Automotive Industry Overview – the same principles of correct part sourcing apply. Also check the Dynapac CC334HF Spare Parts Catalogue for an alternative edition. And if you work on other Dynapac models, the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec is a solid reference.

Serial Number Tracking and Validity

The catalog states on page 3 that this issue (SCC334HF-1EN2, dated 2009-12) is valid for serial numbers from *284S00006* onward. If your roller’s serial is lower than that, you need the earlier SCC334HF-1EN1 issue. Always verify before you order. The factory kept this exact because they want the correct parts to reach the field. Follow that system and you’ll avoid delays.

Does This Catalog Include Torque Specs or Repair Procedures?

No. This is a Parts Catalog, not a service or repair manual. It gives you part numbers and exploded views. If you need torque values, clearances, or diagnostic steps, you need the separate OEM service manual. But for ordering parts, this is the only document you should pull off the shelf.

Is this the actual factory manual or a reprint?

Original OEM PDF from Dynapac. Not a copy, not a scan of a scan.

What serial numbers does this cover?

Starting from *284S00006* for the SCC334HF-1EN2 issue. If your roller serial is lower, you need the SCC334HF-1EN1 catalog. The serial number is stamped on the machine plate – check it before ordering any parts.

Can I use this to order parts for my CC334HF right now?

Yes. The catalog gives you the exact part numbers and denominations. Give those to your dealer, and they’ll pull the right bin. No cross-referencing needed.

Does it include hydraulic system breakdowns?

Yes, the group structure covers hydraulic components with individual part callouts for pumps, valves, hoses, and fittings.

Over 455 pages of factory-correct part data, organized by system, with serial number validation built in. If you maintain a Dynapac CC334HF, this is the reference your parts room should already have. For a broader look at how correct documentation prevents downtime, read the Automotive Industry Overview. Then access the factory manual and put it to work.

Access the Factory Manual