Description

Dynapac CC322 Parts Catalog – 367 Pages of Factory Spare Parts Data

If you’re ordering parts for a Dynapac CC322 vibratory tandem roller and getting the wrong bearing, seal, or hydraulic fitting because someone looked up a number off a third-party site, you already know the pain. I’ve seen shop guys waste a week waiting on a replacement that doesn’t fit because they trusted a reprint catalog that merged serial numbers. That’s why I keep a copy of the Dynapac CC322 Parts Catalog on the shelf – it’s the actual factory SCC322-1EN5 edition, 367 pages, published by Dynapac in Sweden. Every part number in here is tied to a specific roller serial number range. You want the right bearing for a machine built after 2004? Page reference needed – but it’s all there.

This isn’t a repair manual. It’s a Parts Catalog – meaning it shows you the exploded diagrams and lists every nut, bolt, hose, and filter with a part number and denomination. You need to order a new vibrator motor for your CC322? You find the group number, verify your serial number falls in the valid range (from *62110322* to *62110599* for the Deutz BF4L 1011F engine version), and then give the part number to your dealer. Skip that serial number check and you might get a motor that mounts differently. The catalog has that information on the cover page and in the grouping lists.

Ordering Spare Parts: Six Things You Need Before You Call the Dealer

Page 4 of the catalog spells it out in six languages: 1) Machine type, 2) Roller serial number, 3) Quantity, 4) Part number, 5) Part denomination, 6) Dimensions if ordering by length. You’d be surprised how many guys call with just a description. “I need the thing that connects the drum to the frame.” That’s not a part number. The catalog forces you to identify the exact component from the exploded view and cross-reference the serial number table. If you’re looking for the Dynapac CC322 Parts Catalog itself, you already have the correct reference.

Valid Serial Number Ranges for CC322 Vibratory Tandem Roller

Dynapac released five catalogue editions between 1999 and 2004. The SCC322-1EN5 edition applies to rollers with serial numbers from *62110322* to *62110599*, equipped with the DEUTZ BF4L 1011F diesel engine. If your machine falls outside that range, you need an earlier edition. This is why buying a generic reprint is dangerous – they often strip out the serial number tables. You get a part number that worked on a 1999 roller but not on your 2004 unit. Don’t guess. Use the edition that matches your build date.

Parts Catalog vs Repair Manual: Know the Difference

Some people buy a parts catalog thinking they’ll get torque specs and rebuild procedures. That’s not what this is. The Parts Catalog is for ordering – it has exploded views, group numbers, and part denominations. Need to know how to disassemble the drum? That’s a service manual. But if you’re rebuilding a drum and you break a seal, you need the correct part number fast. That’s when this catalog saves you. The group structure organizes components by function – engine group, hydrostatic drive, vibrator system, etc. I’d also recommend the Dynapac CC322 Spare Parts Catalogue if you want the exact same data in a different binding format.

Group Layout and Page Structure

The catalog uses a three-digit group numbering system. Each group covers a specific subsystem: Group 1 – Engine, Group 2 – Transmission, Group 3 – Roller frame and drums, and so on. The text pages at the beginning explain how to read the diagrams. Every part has a reference number that matches the illustration. The parts list gives the part number, quantity per machine, and a note column for special instructions. This is not a guesswork document.

Why OEM Beats Aftermarket Parts Catalogs

I’ve seen aftermarket catalogs that copy the same exploded view but swap part numbers to fit multiple models. That’s how you end up with a steering cylinder that has the wrong port orientation. Dynapac’s own catalog lists the exact part number, the denomination (e.g. “Hydraulic hose, 5/8 in x 600 mm”), and the dimension. When ordering per length, the catalog tells you to specify the dimension – aftermarket reprints often leave that out. For other heavy equipment, check the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec – same level of detail.

This catalog is printed in Sweden. The cover states “We reserve the right to change specifications without notice.” That means if you have a later serial number, you need the latest edition. The 367 pages cover every bolt and washer. For the Automotive Industry Overview on manufacturing standards, you can read up on how OEMs validate their parts databases. The Automotive Industry Overview also touches on supply chain traceability – exactly what this catalog provides.

Does this catalog include torque specs or repair procedures?

No. This is strictly a Parts Catalog – exploded diagrams, part numbers, quantities, and ordering information. For service procedures, get the corresponding service manual.

How do I verify my serial number is covered by this edition?

Look at the serial number plate on your Dynapac CC322. The roller serial number is usually stamped on the frame near the engine. This edition (SCC322-1EN5, 2004-12) covers serial numbers from 62110322 to 62110599. If your number falls outside that range, you need an earlier edition (SCC322-1EN4, 2003-10 or older). The catalog page 3 lists the valid serial number ranges for each edition. Do not order parts for a machine outside the specified range – the part numbers may not fit.

Don’t waste time chasing wrong part numbers. Get the factory reference that Dynapac dealers themselves use. Access the Factory Manual – the actual SCC322-1EN5 – from AutoRepairManuals and stop guessing.