Description

Dynapac CC232 Parts Catalog – 335 Pages of OEM Parts Data

Dynapac CC232 Parts Catalog is a 335-page factory document that cuts through the aftermarket confusion. If you are maintaining a CC232 vibratory tandem roller and need the exact part number—not a look-alike substitution—this is the file to have. The catalog came straight from Dynapac’s publication line, issue SCC232-1EN3, covering rollers with Deutz BF4L 1011F engines within serial number range 61910232 to 61910600. No re-created illustrations, no third-party guesswork. Just the original OEM layout that parts counters use.

Every time I see a mechanic ordering parts from a generic list and getting the wrong hydraulic manifold or bearing, I cringe. That mistake costs billable hours and downtime. This catalog eliminates that. You get the factory grouping, exploded views, and the six ordering fields the manufacturer expects. Use it right, and the correct part shows up the first time.

Catalogue Issue Dates and Serial Number Validation

Page 3 lists the complete revision history of this catalog. The earlier issues (S222EN1 through SCC232-1EN2) were superseded by SCC232-1EN3 dated 2004-12. If your roller serial number falls outside the range listed for the Deutz engine, you need a different issue. Dynapac tied each catalog version to a specific serial number block. Ignoring that match means ordering parts that don’t fit. Always check page 3 before you start.

Ordering Spare Parts: The Six Required Fields

Page 4 spells it out in four languages: machine type, roller serial number, quantity, part number, part name, and dimensions for length-priced items. Miss any one of these and the dealer’s computer kicks the order back. The catalog expects you to provide the serial number from the machine’s plate—not the engine serial, the roller serial. That distinction matters because some sub-assemblies changed between production runs. Write down all six fields before you call.

Engine Coverage: Deutz BF4L 1011F

This parts catalog covers the Deutz BF4L 1011F diesel. If your CC232 has a different engine, you need a separate engine-specific parts book. The catalog groups components by system—frame, drum, vibration system, hydraulic circuit, and engine mounting—but the engine internals (pistons, rings, gaskets) are not included here. For those, refer to the Deutz manual. But for everything bolted to the chassis, this is your source.

How the Parts Group and Page Index Works

Page 5 shows a Group/Page chart with columns for group number, page range, and notes for parts service info and changes. The groups are not labeled in the OCR excerpt, but the pattern is standard for Dynapac: Group 1 (power pack), Group 2 (frame), Group 3 (vibration/drive), Group 4 (hydraulics), Group 5 (steering), Group 6 (brakes, if equipped), Group 7 (electrical), Group 8 (decals), Group 9 (accessories). To locate a part, find the group that matches the system, then scan the page for the exploded view. The Changes column flags revisions—bracketed by issue dates. A changed part number will show a revision note. Do not ignore those notes.

Why Are Factory Parts Catalogs More Reliable Than Aftermarket Lists?

Aftermarket parts catalogs often compress multiple revisions into one drawing or omit the dash-number suffixes. A hydraulic motor that fits a CC232 from 1995 might not fit a 2002 unit because the port orientation changed. The factory catalog shows each revision as a separate part number with a serial number breakout. The Automotive Industry Overview references the importance of source data integrity; this catalog lives by that principle. When you order from this document, you give the dealer the exact piece of data they need to cross-check inventory. No one has to translate a blurry photocopy.

Get the Right Part Number the First Time

Open the catalog. Find the group for your system. Locate the exploded diagram. Read the callout number, then look up the part number in the table. Confirm the serial number range for that part matches your machine. Fill out the six fields from page 4. That process takes five minutes and saves you a return order. I have seen too many guys skip the serial number check and end up with a water separator that has the wrong thread pitch. Do not be that guy.

This catalog pairs with the workshop manual for complete service coverage. Dynapac CC222 CC232 CC422 CC522 CA602 Workshop Manual gives you the torque specs and overhaul procedures. For direct ordering of any part shown here, use the references in DYNAPAC CC232 Parts Catalog and cross-check with the official Dynapac dealer network. A companion file is also available: Dynapac CC232 Parts Catalog – 355 Pages of Factory Specs for alternate printing.

Does this parts catalog include step-by-step repair instructions?

No, it is a parts catalog for ordering spare parts. Repair procedures are in the workshop manual.

How do I find the correct part for my specific CC232 roller?

First, find the roller serial number on the machine plate. Cross-reference it with the catalog issue dates on page 3 to make sure you have the right edition. Then locate the system group (e.g., vibration system, hydraulic circuit) and scan the exploded diagram for the part you need. Note the callout number, then go to the parts list table to get the factory part number. Write down the part number exactly as printed, including any suffixes. Finally, use the six ordering fields from page 4 (machine type, serial number, quantity, part number, part name, and dimensions if applicable) when you call or email your dealer. Following that sequence reduces wrong-part deliveries by a wide margin.

Access the Factory Manual now and keep the Dynapac CC232 Parts Catalog on your bench or tablet. 335 pages of data that answers the part number question before it costs you time.