Description

Dynapac CC224CHF 2010 Parts Catalog – 477 Pages of OEM Factory Specs

If you’ve ever ordered a part for a vibratory roller and got the wrong one because the aftermarket catalog showed a different revision, you know the pain. You pull the old seal, new one doesn’t fit, machine sits, you eat the cost. That stops when you work from a Dynapac CC224CHF 2010 Parts Catalog straight from the factory. This is not a generic list – it’s the exact document the dealer uses to pick parts off the shelf. 477 pages, serial-number specific, and it includes everything from service kits to electrical cable routing. No guesswork, no returns.

Parts Catalog vs. Service Manual – Know the Difference

This Parts Catalog is not a repair manual. It gives you exploded-view drawings and part numbers for every component on the CC224CHF vibratory roller. Need a steering cylinder? Front frame module part number 4700391023 is listed. The catalog is organized by assembly groups: service kits, repair kits, frame, drum, engine, hydraulic system, electrical equipment. Each group breaks down into modules. You look up the assembly, find the part number, and order it. That’s it. But if you skip referencing the serial number range (valid from 10000312x0A000001), you’ll still get the wrong part. The manual reminds you on page 2: roller serial number is required when ordering.

What Service Kits Are Included?

The catalog lists four service kit part numbers: 4700950174 (50h), 4700939076 (250/750h), 4700950175 (500h), and 4700950176 (1000h) – all for the Cummins QSB 3.3 diesel engine. Also three repair kits: eccentric shaft kit (4812155792), scraper kit (4812155791), and shock absorber kit for drum (4812155158). If you’re rebuilding the drum or replacing scraper blades, the exploded view on that page shows exactly which bolts and spacers come in the kit. No more buying separate pieces that don’t line up.

Frame and Drum Sections – Find the Right Part Number

Frame section covers front and rear frame modules. You’ll find the steering cylinder, hitch lock, sprinkler tank mount, even the cocoa mat bracket. Hydraulic system has its own section – front drum, frame, engine room, steering, and offset/combi valve (part 4700391017). Electrical equipment group includes battery disconnect and cable harnesses. Every part is keyed to an illustration. The manual’s text pages use a dot system: parts indented to the right are included when buying the assembled unit above. That saves you from ordering duplicates. The last page has a change log and remarks at the bottom – always check those for superseded numbers.

Which Engine Components Are Covered?

Engine section includes the engine module itself, air cleaner, muffler, exhaust pipe, fuel hoses, charge air cooler, water cooler, expansion tank, coolant hoses. Everything is listed with part numbers for the Cummins QSB 3.3. If you need a replacement radiator or fan assembly, it’s in the rear frame engine structure sub-section. The catalog even shows noise suppression plates and covers kit (4700396638). This level of detail is what separates a factory parts catalog from a generic parts lookup website.

Why Factory OEM Documentation Matters

Aftermarket parts catalogs often merge revisions or leave out details like the difference between a scraper module with nozzles and without nozzles. The Dynapac catalog has separate entries: “Scraper module, without nozzles” and “Scraper module, with nozzles.” That distinction matters if your machine has the emulsion sprinkler system. The same precision applies to the hydraulic valve – part 4700395924 is not interchangeable with the offset valve 4700391017. Automotive Industry Overview references show that OEM data reduces misorder rates by a significant margin. Don’t rely on third-party databases that may have transcription errors. This manual is a direct scan of the original print, published in 2010, 477 pages, multilingual.

Order Parts by Serial Number

Page 2 of the catalog spells it out: give your dealer the machine type, roller serial number, quantity, part number, part name, and dimensions if ordering by length. That’s it. No callbacks for clarification. The catalog is valid for serial numbers from 10000312xA000001 onward. If your machine is older, check the previous issue (SCC224CHF-2EN1). This manual replaces issue 2EN1 with update 2EN2. Always verify you have the latest revision. Automotive Industry Overview

FAQ

Can I use this parts catalog to perform repairs?

No. This is a parts catalog only. It lists components and their numbers, not repair procedures. You need a separate service manual for torque specs and disassembly steps.

Why does the catalog include multiple languages? Does that affect part numbers?

The languages (English, Swedish, German, Italian, Spanish, French) are only for the ordering instructions and headers. Part numbers and illustrations are the same regardless of language. The catalog was printed in Sweden for global distribution. Every language section shows the same exploded views and numbers. Use English for clarity, but the Italian or German sections will give you the same 4700391023 for the steering cylinder. No translation errors exist because the numbers are numeric.

If you work on rollers, you know that getting the right part on the first order keeps the machine running and the job on schedule. This is the factory document, not a reprint. Access the Factory Manual now and keep it on your tablet or print the pages you need. Stop cross-referencing aftermarket sites. Use the real thing.

Related manuals: Dynapac CC224CHF Spare Parts Catalog, DYNAPAC CC224CHF 2010 Parts Catalog, Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec