Description

Dynapac CC092 Parts Catalog

If you’re ordering parts for a Dynapac CC092 vibratory roller and you don’t have the factory parts catalog in front of you, you’re gambling with downtime. I’ve seen shops order a water pump three times before they got the right one because someone used a third-party list. This Dynapac CC092 Parts Catalog is 196 pages of OEM drawings and part numbers – the same sheets the Dynapac dealer uses. No guesses.

Parts Catalog Coverage: Engine and Roller Systems

The manual covers the vibratory roller model CC092 with the Hatz 2G40 diesel engine. You get exploded-view illustrations for every major assembly – drum, frame, engine mount, hydraulics, articulation joint. Each drawing has a callout with the part number and denomination. If you need to order a seal, bearing, hose, or bracket, you find the number first, then order. Page 4 shows the six-piece ordering format: machine type, roller serial number, quantity, part number, denomination, and dimensions for cut-to-length items. Ignore that, and you’ll get the wrong piece.

Dynapac CC092 Parts Catalog: Revision Tracking

This specific issue is SCC092-1EN2, dated 1997-05 and supersedes earlier revisions. It is valid for serial numbers from 60610092 onward. If your roller is older, you need the earlier catalog. The parts catalog lists which revision applies to which serial range – that’s the kind of detail you don’t get from a generic PDF. Dynapac still supports these rollers, and using the correct revision means your parts numbers match what the factory ships.

Ordering Spare Parts: The Right Information

Page 4 spells out exactly what the parts desk needs. You need the roller serial number. Without it, they’ll guess. The catalog also has a section for changes and notes (page 5). I’ve seen too many techs skip the serial number step and end up with a hydraulic filter that doesn’t thread on. Spend the extra two minutes to confirm the numbers – it saves a week of waiting.

Why Factory Parts Catalogs Beat Aftermarket Lists

Aftermarket parts list often renumber parts to fit their stock system. The OEM Dynapac catalog uses Dynapac part numbers. When you call the dealer with a Dynapac number, they pull the bin location immediately. That’s the difference between getting the part tomorrow and getting a cross-reference headache. This manual also includes the original Swedish, German, Italian, Spanish, and French text – so if your supplier is overseas, you can give them the part number in their language. For related heavy equipment, check the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec for cold planers. Also look at Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer and Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings.

3 Common Ordering Mistakes Avoided

First: ordering by description alone. The catalog gives you the exact number. Second: ignoring the revision level. The SCC092-1EN2 supersedes older versions – parts change. Third: not reading the notes. Page 5 has service info and change annotations. Read them. If you’re unsure about diesel engine parts, Automotive Industry Overview covers engine fundamentals, but for the Hatz 2G40, stick to the catalog.

FAQ – Dynapac CC092 Parts Catalog

Does this catalog include torque specifications for assembly?

No. This is a parts catalog, not a service manual. Torque specs are not listed. You need the separate service manual for those values.

Can I identify part numbers for the Hatz 2G40 engine with this manual?

Yes. The catalog contains exploded views of the Hatz 2G40 diesel engine and all its components – injection pump, cylinder head, oil pan, gaskets. Each part is listed with its Dynapac part number. The engine section is a few dozen pages of the 196 total. Cross-reference your serial number to the revision table on page 3 to confirm the catalog covers your engine variant.

What serial numbers does this SCC092-1EN2 revision cover?

It covers rollers with serial number 60610092 and higher. If your CC092 serial is below that, you need the earlier SCC092-1EN1 revision.

How do I order the correct part using this catalog?

Follow the six-step procedure on page 4: machine type (CC092), roller serial number, quantity, part number from the drawing, denomination (description), and dimensions if ordering a length of hose or wire. Write it all down. Include your agent/dealer contact from the back page.

Stop ordering blind. Access the Factory Manual and get the right Dynapac part the first time. 196 pages of OEM numbers – no cross-referencing, no delays.