Description

Dynapac CC 501C Parts Catalog – OEM Factory Spare Parts Guide

If you are turning wrenches on a Dynapac CC 501C vibratory combination roller, you know that one wrong part number can stall the job for a day. This is the factory Dynapac CC 501C Parts Catalog – 222 pages of genuine OEM exploded diagrams and part numbers, not a third-party recompilation. No guessing which bolt threads into which bracket. These are the same documents the dealer uses when you call in a serial number. Automotive Industry Overview for context on why OEM documentation matters in heavy equipment.

I have seen too many shop orders held up because someone ordered a “looks-like” part from a copycat listing. This catalog eliminates that. Every fastener, hose, bearing, and seal is cross-referenced to the exact Dynapac factory number. If your CC 501C has a serial number from 2000 onwards (starting 60010501), this covers it. The diesel engine section is for the Cummins 6CT 8.3 / C – not generic Cummins spec, but the specific configuration used in this roller.

222 Pages of Factory Part Numbers

Two hundred and twenty-two pages is not a marketing number. It means every assembly group – from the drum drive to the operator station – gets its own section. The catalog is broken into groups (like Group 3 for the engine, Group 5 for the hydraulics) with individual exploded views. Each page includes the part number, description, quantity used, and notes for changes. The text pages follow a structured layout: group number, page number, and a change indicator when parts were superseded. If you need to verify a part from a 1992 roller, the catalogue issue history back to S-10245-1 is listed on page 3.

Ordering Spare Parts: What the Manual Tells You

Page 4 of the catalog lists exactly what information you need to give when ordering. Machine type, roller serial number, quantity, part number, denomination, and – for bulk items – length. Skip any of these and you will get the wrong part. The catalog also includes multi-language instructions (Swedish, German, Italian, Spanish, French) because this machine was built in Sweden and shipped worldwide. Your local dealer will ask for the same data. This manual shows you how to decode the part number structure so you can verify orders before the part arrives.

Cummins 6CT 8.3 Engine Coverage

The CC 501C uses a Cummins 6CT 8.3 diesel, and the parts catalog dedicates several pages to engine components. You get the factory exploded view of the block, cylinder head, fuel system, and accessory drive. Each component is listed with its Dynapac part number, not a general Cummins number. This matters because the roller’s mounting brackets, pulleys, and vibration pump drive are specific to Dynapac’s configuration. Trying to cross-reference from a Cummins shop manual will waste time. Dynapac CC 501C Spare Parts Catalog is the same document – make sure you have the latest issue (SCC501C-1EN1) for serial numbers from 60010501.

If you also work on other Dynapac equipment, check out the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec for the cold planer, and the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer for a similar format. The same attention to detail applies.

Your Real Use Case: Keeping This Roller Running

If you are a fleet mechanic or a rental yard technician, your day is about uptime. When a CC 501C comes in with a leaking hydraulic hose or a worn drum bearing, you need the exact replacement part number to order before the machine is torn down. This catalog lets you pre-order parts. It also shows you which parts are superseded – for example, if an older part number has been replaced by a newer design, the catalog notes the change on the relevant page. No sorting through dealer bulletins. The page numbers in the table of contents guide you straight to the assembly group.

Beginners: do not assume a part that looks correct on eBay is correct. Use the factory number. This catalog gives you that number. Automotive Industry Overview is not your reference here – stick to the factory source.

Why Factory Documentation Beats Aftermarket

Aftermarket parts catalogs often copy the drawings but omit the revision history. Dynapac issued this catalog in multiple revisions – S-10245-1, S-245-2, and finally SCC501C-1EN1. Each revision corrected errors or added new part numbers. The aftermarket reprints are typically based on the earliest version. You lose those updates. This is an original scan, not a reprint. The OCR text on page 1 shows the Svedala Dynapac header and the correct catalogue number. If you care about getting the right part the first time, you use the factory catalog.

Frequently Asked Questions

Does this catalog include torque specs or repair procedures?

No. This is a parts catalog, not a service manual. It has exploded views and part numbers only. For torque values and repair steps, you need the separate Dynapac CC 501C Service Repair Manual.

What serial numbers does this cover?

This issue (SCC501C-1EN1) is valid for roller serial numbers from 60010501 onward, produced from November 2000. Earlier rollers require the previous catalogue issue. Check the serial number plate on your machine before ordering parts against this catalog. The manual prints the valid serial number range on page 3.

Do not waste a day hunting for a part number that might be wrong. Access the Factory Manual now and keep your CC 501C running with genuine Dynapac parts.