Description

Dynapac CC 14, CC 14G Technical Manual – Factory OEM Specs

Look, if you’re trying to keep a Dynapac CC 14, CC 14G Technical Manual vibratory roller running on a job site without the factory paperwork, you’re gambling with downtime. I’ve seen guys throw aftermarket grease at a drum seal because they guessed the spec, then spend a full day tearing it back apart. This 37-page Technical Manual from Dynapac cuts that nonsense out. It’s the same booklet the dealer tech uses, printed for rollers starting at serial No. 574u202f183. No reprints, no third-party edits – just the original OEM data.

37 Pages of Factory Data

Every page in this manual has a purpose. Page 1 alone covers the exact lubricant grades: lithium-base grease with EP additive (NLGI No.u202f2), engine oil for API CD/SE (SAE 10W/30 or 20W/40 depending on temperature), hydraulic oil – Shell Tellus Tu202f68, and gear oil SAEu202f90 HD (API GL-5). That’s not opinion; that’s the spec Dynapac stamped into the document. The maintenance schedule starts on page 2 and runs through daily, weekly, every 14 days, monthly, six months, yearly, and special instructions on page 24. You don’t guess intervals – you follow the table.

Lubricants: The Exact Grades You Need

Oil viscosity is not a suggestion. Page 1 of the Dynapac CC 14, CC 14G Technical Manual gives a temperature-viscosity chart: -10°C to +30°C uses SAE 10W/30; -10°C to +50°C uses SAE 20W/40. Hydraulic oil must have anti-wear additive – Shell Tellus Tu202f68 or equivalent. Grease must be lithium base with EP additive. If you use the wrong spec, the drum bearings run hot and wear fast. The manual warns you: “Excessive grease or oil will cause parts to run hot, thus causing rapid wear.” That’s your cue to pull out the grease gun with the right cartridge.

Maintenance Schedule: Daily to Yearly

Maintenance is broken down by hours of operation. Daily – every 10 hours – includes checking the fuel tank, water tank strainer, air cleaner, engine V-belt monitor, and a dozen other points. Weekly adds the engine valves, fuel filter, and drum oil level. Every 14 days you inspect the brakes and drum bearings (CCu202f14G front drum only). Monthly work includes the hydraulic oil filter and steering joint. Six-month and yearly intervals cover the major hydraulic and engine systems. Special instructions on page 24 list conditions where you must contact Dynapac for additional lubrication recommendations – for example, extreme hot or cold operation.

Why Trust OEM Over Aftermarket Copies?

Aftermarket manuals often copy the original but leave out the spec tables or use different units. This one is the actual Dynapac publication – M-10184-3 Eng – with the exact page numbering and data from the factory in Karlskrona, Sweden. The torque values, fluid capacities, and service points are verified against the Deutz F3Lu202f912 and F2Lu202f912 engines. If you rely on a generic roller manual, you risk overfilling the hydraulic tank or using the wrong grease on the drum gearbox. That costs you a weekend and a tow bill.

7 Service Points You Cannot Overlook

Figureu202f1 on pageu202f2 labels 23 service points. A few that guys skip: the drum bearing (only CCu202f14G front drum, itemu202f15), the steering articulated joint and steering cylinders (itemu202f17), and the shock absorbers and securing screws (itemu202f22). The manual pairs each point with the correct lubricant code (A, B, C, or D from pageu202f1). If you don’t check the drum gearbox oil level (itemu202f12) regularly, you’ll cook the gears. The OEM schedule tells you exactly how often – every week.

For parts diagrams and part numbers, grab the Dynapac CC 14 Parts Catalog to pair with this tech manual. If you work on other Dynapac rollers, the Dynapac CA 15 Technical Manual – OEM Factory Specs and the Dynapac CG233HF 2006 Technical Manual – Factory Specs for Vibratory Roller cover similar ground with their own specs.

Understanding the powertrain helps when troubleshooting driveline issues. The factory engine manual includes a Manual Transmission section that details gearbox oil change intervals – reference that alongside this roller manual. For the drum drive, the Manual Transmission lubrication specs from the Deutz documentation apply to the gearbox oil (itemu202f13).

Frequently Asked Questions

Does this manual cover both the CCu202f14 and CCu202f14G models?

Yes. The title explicitly includes both models, and the table of contents lists maintenance for both the Deutz F3Lu202f912 (CCu202f14) and Deutz F2Lu202f912 (CCu202f14G). The serial number validity begins at 574u202f183.

What lubricant is specified for the gearbox?

Gearbox oil – SAEu202f90 HD meeting API GL-5 (lubricant code D from pageu202f1).

How many pages does the manual have?

37 pages.

Can I use this manual for a roller with a serial number lower than 574u202f183?

Dynapac issued this revision (M-10184-3 Eng) specifically for rollers from serial No.u202f574u202f183. Earlier machines may have different service points or lubrication specs. You should obtain the correct manual for your serial number range to avoid applying wrong torque values or grease types.

If you own a Dynapac CCu202f14 or CCu202f14G, this 37-page factory Technical Manual is the only document that gives you the exact lubricant grades, service intervals, and maintenance procedures from the manufacturer. Don’t trust your machine to a photocopied generic. Access the Factory Manual and keep it in your tool box – next time you hit a grease fitting, you’ll know you’ve got the right spec.