Description

Dynapac CA600PD 2011 Parts Catalog – Factory OEM Spare Parts Manual

Parts ordering is where most jobs go sideways. You pull a pump, find a cracked seal, call the dealer, and they ask for a serial number you can’t find or a part number that doesn’t match. Then you wait three days for the wrong gasket. This Dynapac CA600PD 2011 Parts Catalog stops that. 222 pages of factory-blessed part numbers, grouped by system, with exact illustrations and serial number ranges. No guessing what fits.

What This Parts Catalog Actually Covers

Open this and you get the complete spare parts breakdown for the CA600PD vibratory roller starting from serial number 10000121X0A000001. The table of contents splits the machine into major groups: Service kits, Repair kits, Frame, Drum, Engine, Transmission, Hydraulic system, Electrical equipment, Driver’s platform, Decals, and Standard/Optional equipment. Each group then breaks down into sub-assemblies with individual part numbers.

Service kits are listed with their Dynapac part numbers: 4700940322 for the 50-hour kit, 4700938528 for the 250/750-hour kit, and so on. Repair kits cover the steering hitch, eccentric shaft, drum rotation, shock absorber, and forward/reverse control button – all with specific kit part numbers. That means you order one box and get every seal, bearing, and o-ring you need.

Service Kits and Repair Kits: Why You Need the Correct Part Number

If you’ve ever tried to piece together a service kit from generic o-rings, you know the pain. One wrong durometer and you’re back in the drum within 50 hours. This catalog gives you the exact Dynapac kit number, so your parts counter guy doesn’t hand you a substitute that sort of fits. The 50-hour kit, 250/750-hour kit, 500-hour kit, and 1000-hour kit are all listed on separate pages. For repairs, the eccentric shaft kit (4700945657) and drum rotation kit (4700938891) come with all fasteners and wear items specified. No guesswork.

Engine and Hydraulic System Coverage

The CA600PD runs a Cummins 6BTA 5.9 diesel. The catalog devotes a full section to that engine, including fan and fan clutch, cooling, combustion air, fuel, and exhaust systems. Need the fuel injection pump part number? It’s in there. The hydraulic system gets its own deep dive: propulsion pumps (4700380830 and 4700373361 for rear motor), vibration pump with rotating group (4700383959) and valve block (4700936609), steering cylinder (4700392027), and steering valve (4700376000). Brake system, hydraulic oil tank, and optional central test panel are all covered.

3 Reasons to Trust OEM Documentation Over Aftermarket

First, aftermarket parts catalogs often use generic illustrations that don’t match your machine’s revision. This is a factory Dynapac publication – the same one dealers pull from. Second, the part numbers here tie directly to Dynapac’s ordering system. Third, the serial number range is printed on the cover: valid from 10000121X0A000001. You know exactly which roller this applies to. Aftermarket catalogs never give you that level of traceability.

Need to see where the parts go? The exploded-view drawings in this manual are not low-res JPEGs. They are line drawings with callouts matching the parts list. First find the group (e.g., Drum Cartridge Vibration side), then the illustration, then the item number, then the part number. Repeat until your order is correct.

Does This Manual Cover Your Serial Number Range?

Yes – if your CA600PD has a serial number starting with 10000121X0A000001 or higher. The catalog is issue SCA600PD-2EN2, published 2011-10, superseding the 2010-04 edition. If your roller is older, you may need an earlier issue. The manual includes ordering instructions in six languages on page 2: you must provide the machine type, roller serial number, quantity, part number, part denomination, and dimensions for items sold by length. Skip any of those and the dealer will send the wrong piece.

FAQ

Is this a repair manual or a parts catalog?

It is only a parts catalog. No torque specs, no step-by-step disassembly instructions. You get part numbers and exploded views. Pair it with the service manual for actual procedures.

Does it include wiring diagrams?

No. The electrical section lists parts like the control panel and working lights, but not wire colors or connector pinouts. For electrical diagnostics you need the Dynapac workshop manual.

Can I use this for the CC424HF model?

No. That model has its own parts catalog (seen in the PDF bookmarks). This manual is specific to the CA600PD. Ordering CC424HF parts with CA600PD numbers will result in a pile of wrong components. Verify your model before buying.

What if my serial number is different from the range listed?

The catalog covers rollers from serial 10000121X0A000001 onward. If your machine has a lower number, you need the earlier issue (SCA600PD-2EN1). We recommend checking with your local Dynapac dealer to confirm the correct edition for your specific roller.

Stop ordering parts blind. This Dynapac CA600PD 2011 Parts Catalog is 222 pages of factory-correct part numbers, service kit IDs, and serial-number-specific coverage. It saves the phone tag with parts counters and the return shipping fees. If you maintain a CA600PD, you need this on your tablet or print it out and throw it in the roll box. Access the Factory Manual now and start ordering the right parts the first time.

Related Manuals:

• Dynapac CA600PD Parts Catalog
• DYNAPAC CA600PD Spare Parts Catalogue SCA600PD-1EN5
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec

For more context on construction equipment parts documentation, see the Automotive Industry Overview.