Description

Dynapac CA600D 2011 Parts Catalog – Factory Parts Breakdown

If you are wrenching on a Dynapac CA600D vibratory roller and need a part number, you do not want a third-party reprint or a scanned PDF that lost the last ten pages. This 2011 Parts Catalog is an original OEM document – 218 pages of exploded diagrams, part numbers, and the exact ordering data Dynapac printed in Sweden. I have seen aftermarket catalogs swap a bolt thread pitch or skip a seal. That gets expensive fast when the wrong part arrives and the machine sits. This manual removes that risk.

Service Kits and Repair Kits: The First Step

The Table of Contents lists every service interval kit, from the 50-hour kit (part 4700940322) up to the 1000-hour kit (4700950611). Repair kits are also indexed: steering hitch kit (4700938562), eccentric shaft kit (4700945657), drum rotation kit (4700938891), shock absorber kit for the drum (4700938883), and the F/R control button kit (4700940662). If you are rebuilding a drum cartridge, the manual groups the vibration-side and drive-side assemblies so you order everything in one shot – no guessing what bushing goes with which bearing.

What Does the Cummins 6BTA 5.9 Section Cover?

The engine chapter breaks down the Cummins 6BTA 5.9 diesel into subsystems: fan and fan clutch, cooling system, combustion air system, fuel system, and exhaust system. Each component has a part number and reference to the corresponding exploded view. On page 2 of the catalog, Dynapac prints the ordering rules in four languages – you need to provide machine type, serial number, quantity, part number, denomination, and length if ordering by meter. Skip any of those and you will get the wrong hose or the wrong gasket.

3 Critical Sections for Hydraulic System Repairs

The hydraulic system chapter is split into five subsections: propulsion (front and rear), vibration, steering, brake, and oil tank. The rear propulsion section includes the pump (4700380830) and motor (4700373361). The vibration system lists the pump (4700383959) with its rotating group assembly and valve block (4700936609). If you are chasing a vibration circuit leak, the manual shows the hydraulic motor (4700380146) and the central test panel (option). Aftermarket catalogs often combine all pumps into one generic drawing – this manual separates them by function and serial number range.

Get the Right Part Number Before You Order

The Numerical Index at the back lets you cross-reference any part number quickly. The manual covers serial numbers starting from 10000121x0A000001. If your CA600D is newer than 2011, you need the correct catalog issue. For the 2011 model year, this is the document. Ordering a part without verifying the serial number is asking for a return. The catalog even includes separate sections for optional equipment like working lights, rotating beacon, back-up alarm, air conditioner, and heater – each with its own sub-group.

Dynapac CA600D Parts Catalog: Exploded Views You Can Trust

Every group – frame, drum, engine, transmission, hydraulic system, electrical equipment, driver’s platform, decals, standard and optional equipment – is laid out with exploded diagrams and a parts list. The frame section includes scrapers (spring steel), hitch, structure, and side covers option. The drum section splits into drum cartridge vibration side, drive side, and the gear. The transmission shows both the limited-slip rear axle (4700385100) and the no-spin option (4700383856), each with differential housing, brakes, and planet gear assemblies.

For the electrical system, you get the control panel, working lights (rear option), rotating beacon option, and back-up alarm. The driver’s platform covers canopy, ROPS/FOPS, cab mounting, cab screens, door, interior rear mirror, wiper, electric, and exterior mirrors. Decals are listed with their exact placement. This is not a aftermarket summary – it is the same binder Dynapac dealers use.

Why This Manual Belongs in Your Toolbox

If you are a shop foreman, you know the cost of downtime waiting for the wrong seal. If you are a DIY owner-operator, you do not have time to decode a generic parts list. The Dynapac CA600D Parts Catalog gives you the factory part numbers, the ordering instructions from page 2, and the confidence that when you call your dealer, you give them the correct number the first time. I have used Dynapac manuals for twenty years – the print quality, the diagram clarity, and the part indexing are leagues ahead of aftermarket copies.

Does this parts catalog include torque specifications or repair procedures?

No. This is a parts catalog, not a service manual. It contains exploded views, part numbers, and ordering info only.

How do I verify that this 2011 version matches my roller’s serial number?

The catalog is valid for serial numbers starting at 10000121x0A000001. Check your machine’s plate. If your serial falls within that range, you have the correct manual. Dynapac updates catalogs yearly; the 2011 issue (SCA600D-2EN2) supersedes the 2010 version. Using the wrong revision can give you obsolete or discontinued part numbers.

Stop chasing part numbers from faded photocopies or sketchy websites. Access the Factory Manual now – get the same document Dynapac shipped to dealers in 2011.

Related Manuals:

• Dynapac CA600D Parts Catalog
• Dynapac CA600D Parts Catalog – Factory Spare Parts Breakdown
• Dynapac CA600D 2009 Parts Catalog – OEM Spare Parts Manual
• Dynapac
• Automotive Industry Overview