Description

Dynapac CA4000D, CA4000PD 2017 Parts Catalog – Factory Specs on the Bench

Nothing beats having the OEM parts catalog on the bench when a CA4000D or CA4000PD rolls in with a blown drum seal. You pull the cartridge, find the old part number is illegible, and you’re flipping through aftermarket lists that show three different options. That’s lost time. The Dynapac CA4000D, CA4000PD 2017 Parts Catalog kills that guesswork. 588 pages of factory-sourced part numbers, exploded diagrams, and service kit groupings. You match your serial number, turn to the right page, and order exactly what fits.

Page 73 shows the cover assembly breakdown – not a generic picture, but the exact brackets, hinges, and safety link module for your SN range. No ambiguity.

Service Kits for CA4000D and CA4000PD

Dynapac laid out the maintenance intervals in plain view. Nine separate service kits are listed starting from the 50-hour Plus kit (part 4812156993) all the way to the 2000-hour Cummins QSB 4.5 kit. Every kit includes the filters, seals, and wear items you need for that specific service interval. If you’re servicing a machine with the limited-slip rear axle, the 50-hour Plus kit 4812159996 covers that variant. No need to cross-reference separate documents. This catalog groups them by hours and by engine type.

Drum Cartridges – What the D and PD Versions Share

Different drum configurations mean different cartridges. The catalog separates the D version (standard drum) and the PD version (padded drum). Page 85 lists the vibration-side drum cartridge for the D version: part 4812158092. For the PD version it’s 4812158093. Both share the same drive-side cartridge (4812158087 for D, 4812158088 for PD). If you miss that distinction and order the wrong one, the drum won’t seat. This catalog makes the split obvious with separate sub-sections and cross-references for shaft nut variations.

Ordering the Right Engine Hood Assembly

Engine structure components get a full spread. The engine hood complete (4812120749) and the lock handle complete (4812118994) are shown with their mounting hardware. Fender modules, hinge modules, gas spring modules – everything is traced back to individual part numbers. If you need a safety link module or a lock handle assembly, you’re looking at the exact exploded view from the factory line drawing. No aftermarket artist’s interpretation.

Why This Parts Catalog Beats Aftermarket Lists

Aftermarket parts catalogs are often photocopies of older revisions, or they lump multiple serial number ranges together. This is a 2017 release from Dynapac themselves. It covers CA4000D and CA4000PD from serial number 10000150xxA016902 onward. The document warns: “Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.” That’s printed on page 2. If you’re a shop that takes liability seriously, you run the official document, not a summary.

3 Critical Systems You Can’t Afford to Misidentify

Hydraulic system variations (traction control vs. anti-spin, with or without high static linear load) each have their own motor part numbers. The drum motor for vibration (4812112216) splits into rotary group, flush valve, and cover sub-assemblies. Confuse the anti-spin drum motor (4812112202) with the standard one, and the loop flushing circuits don’t match. The catalog breaks each hydraulic system into its own chapter with dedicated exploded views. You see exactly which O-rings, cartridges, and orifice plates belong to your configuration.

If you service multiple Dynapac rollers, pair this catalog with the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec for your cold planer work. The same factory-document structure applies – no guessing. For additional references, check the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer and the Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings.

Automotive Industry Overview for context on how OEM documentation supports heavy-equipment repair standards.

FAQ

Does this catalog include torque specifications?

No. This catalog lists parts only. Use the separate service manual for torque values.

How do I use the service kit numbers to order the correct kit?

Match your machine’s serial number to the serial number range printed at the top of each service kit section (e.g., SN 10000150xxA016902 -). Then pick the kit by hours – 50h, 500h, 1000h, 2000h – and by engine variant (Plus vs. standard). The catalog also notes whether the kit is for the limited-slip rear axle or the standard axle. If your machine has the Cummins QSB 4.5 Tier 4i engine, use the kits that say “Cummins QSB 4.5” in the description. Cross-check the kit part number against the list starting on page 3. This approach eliminates the risk of ordering a kit that doesn’t include the correct fuel filter or oil filter for your specific emission level.

Can I use this catalog for a CA4000 without the D or PD suffix?

This catalog is specifically for CA4000D and CA4000PD models with the IIIB/T4i engine. Earlier models may have different part numbers.

What engine is covered in this parts catalog?

Cummins QSB 4.5 (IIIB/T4i) as shown on page 1.

If you want to stop guessing which part fits, access the Factory Manual from AutoRepairManuals and keep your roller running with the exact components Dynapac intended.